INVITE-ONLY SCRIPT

Mis à jour avant-hier

MCDX Plus

INTRODUCTION
Upgraded version of MCDX (Add Moving Average) PROTECTED VERSION
This indicator is similar to original MCDX to detect Buyer and Seller momentum based on Price and Volume to detect Buyer and Seller momentum
This indicator helps to detect “Strong Buyer Activities a.k.a Bankers” based on volume and price movement.

HOW TO USE THE INDICATOR?
There are 2 parts . BARs & Moving Average Lines

BARs

RED BAR = POSSIBILITY of BANKER VOLUME
YELLOW BAR = POSSIBILITY of HOT MONEY VOLUME
GREEN BAR = POSSIBILITY of RETAILER VOLUME

Red Bar Increase means Buyer's momentum increases.
Green Increase means Seller's momentum increases.
We focus on RED Bar to buy. i.e PREFERABLY we buy when RED bar increase.

Example:-

If Banker’s Bar (Red Bar) crosses above 5 (25%) = Banker begins to build position
If Banker’s Bar > 10 (50%) = Banker already built positions. Price will start accelerate
If Banker’s Bar > 15 (75%) = Banker in control. Price will rocket
If Green colour is Retailer (Avoid)..

MCDX Plus comes with Moving Average
DEAD CROSS (shares down)

Banker’s MA cross below Retail’s MA
Banker’s MA cross below Hot Money’s MA
Hot Money’s MA cross below Retail’s MA

GOLDEN CROSS (shares up)

Banker’s MA cross above Retail’s MA
Banker’s MA cross above Hot Money’s MA
Hot Money’s MA cross above Retail’s MA

Contact me to find out more about Turtle Trading System and indicators

Notes de version

Minor Bug Fix on Retailer Moving Average.

Notes de version

ver 57.0 : Change minimum offset setting to 2 to increase sensitivity for Intraday trade.

Notes de version

Version 61.0 Change Offset data type to float with 0.5 step change (Intraday trade setup)

Notes de version

Enhancement:-
1) Differentiate type of RED BAR
DARKER RED COLOR - STRONG BULL FORCE
LIGHTER RED COLOR - WEAK BULL FORCE

example of usage :- Potential Buy if Banker's Chip bar change from LIGHTER to DARKER RED

2) Enable Alert Notification of Banker's Bar color changing.
DARKER RED COLOR - STRONGER BULL Alert Notification
LIGHTER RED COLOR - WEAKER BULL Alert Notification

Notes de version

Set Highlight Weak Banker as Default Setting
Add Oversold (OS) signal for Sell at Peak setup
Add Overbought (OB) signal for Buy on Dip setup

Detail usage of MCDX+ is shown below.

Notes de version

1) Publish with Clean Chart.
2) Change offset default setting to 10

Notes de version

Change scale from 20 to 100 to represent percentage.

Notes de version

Remove dormant input and cleanup code.

Notes de version

Implement Golden & Dead Cross Alert.
Alert Conditions:-

Banker's MA > 25%
BANKER MA CROSSES HOTMONEY/RETAILER MA

Notes de version

Implement BANKER SPIKE ALERT
Spike up with +ve Delta % will trigger Spike Up Alert
Spike Down with -ve Delta % will trigger Spike Down Alert
The alert is determined by Banker Delta Alert setting.

Notes de version

Add Banker spike label onto the indicator to indicator further buy or further sell.

Notes de version

Release V1.31 :-
(Previous Released V1.08)
V1.15 Detect Banker Momentum for FIFO trade. (Measure relative strength of Banker's momentum versus Retailer momentum)
V1.16 Include SmartMCDX feature to enable analysis without volume data.
V1.16 Code cleanUp

Notes de version

Cosmetic update : Change HotMoney color to WHITE when Offset is not in default setting.

Notes de version

Add option in MCDX setting to allow user to choose Manual or Auto Offset setting

For Auto Offset setting, MCDX will automatically change the offset when Timeframe change based on the following :
M, W, D, 4H => Offset 10
2H, 1H => Offset 5
30min , 15min => Offset 2.5
5min down to 1min => Offset 0.5

Notes de version

update script to follow latest TV function call color.new()
No change to user experience.

Notes de version

Cosmetic change.
1. User able to customize color
2. MCDX value displayed as legend
3. Min Moving Average reduced to 1
4. Add Tooltip to explain functionality

Notes de version

Minor change
Add input to change legend width

Notes de version

Allow table to auto adjust the width based on content.

Notes de version

Version 172.0 - Reduce Minimum offset to 0.01 for scalping.

Notes de version

Ver177 : Integrate Momentum Indicator with Turtle Trend

Notes de version

V198 - Include Strong and Weak Retailer highlights, similar to Strong and Weak Banker higher.
---- How to Read ----
Strong Retailer (Dark Green) is when selling starts to make a move.
Weak Retailer (Light Green) is when selling is slowing down.
Strong Banker (Dark Red) is when buying start to rally.
Weak Banker (Pink) is when buying slowing down.

Example of usage (Best if use with Turtle Signal):-
Buy/LONG :
Turtle Signal / Trend Buy Signal on UPTREND and BULLISH
MCDX Retailer become weak (light green) and Banker become Strong (Dark Red)

Sell/SHORT:
Turtle Signal / Trend Sell Signal on DOWNTREND and BEARISH
MCDX Banker become weak (pink) and Retailer become Strong (Dark Green)

AVOID Sideway
Ignore Turtle Sell/Buy signal if
HotMoney (Yellow or Grey) dominate the %
Both Banker and Retailer are weak.

Notes de version

Version 206: Include Classical Divergence setup under MOMENTUM indicator
Note: Divergence is a sign, not a signal to buy/sell. A bearish divergence is a pattern that occurs when the price reaches higher highs, while the technical indicator makes lower highs i.e Bearish Divergence meant there's a sign of bearish in Bullish Momentum while Bullish Divergence meant there's a sign of bullish in Bearish Momentum

Notes de version

VERSION 207 - Additional Settings for FOREX/GOLD traders:-
For Forex/Gold trader, it is recommended to increase MCDX sensitivity by reducing OFFSET value.
Default value is 10 which is mainly for STOCK.
For Forex/Gold, recommend setting is below 2.5.

GO TO MCDX Setting, Uncheck MCDX+ Auto Offset option, then change the Offset value to 0.2,
Refer to below diagram for MCDX+ setting

Notes de version

Version 212
MCDX as main indicator.
Option to display MCDX Moving Average or Momentum as Secondary Indicator

Notes de version

Version 222
Enable Momentum crossing alert.
Add Smoothening momentum option.

Notes de version

VERSION 228

Add Fast Turtle Buy at OverSold Momentum Alert.
Add Fast Turtle Sell at OverBought Momentum Alert.

Notes de version

Include Intraday algorithm into MCDX+
Remove Divergence feature.

Notes de version

VERSION 257:
🔴Strong Red = Strong Bull (LONG)
Weak Red = Weak Bull
🟢Strong Green = Strong Bear (SHORT)
Weak Green = Weak Bear
Thin line = Banker Moving Average
Thick Line = Retailer Moving Average
Remove HotMoney Moving Average.

Automatically change the algorithm to INTRADAY Setting if TIMEFRAME below DAILY TF.

Label L (LONG) and S (SHORT) will display based on INTRADAY RULES.
i.e:- (Default Setting)
LONG if BANKER MA CROSS above 25 but BELOW 35 and RETAILER % BELOW 25
SHORT if RETAILER MA CROSS above 25 but BELOW 35 and BANKER% BELOW 25

Notes de version

VERSION 262:
Update Intraday algorithm.
Automatically tune Offset setting for Timeframe below Daily chart.
Signal based on relative strength of BANKER and RETAILER.

Notes de version

VERSION 264
Automatically change algorithm to Smart Intraday if
> Instrument without Volume or
> Timeframe below DAILY chart and MCDX Auto Offset

Notes de version

Cosmetic update :
Customizable colors for Banker and Retailer MA

Notes de version

Version 293
- Cosmetic change - option to change Font Size for legend.
- Upgrade to PineScript Version 5.

Notes de version

Version 296 :
Cosmetic Update - Lagend's color following latest MCDX status

Notes de version

Version 332
1) Consmetic update - enable Color Opacity in property setting.
2) Add StrongBankerPct (Strong Banker Percentage) and StrongRetailerPct (Strong Retailer Percentage) variables for customize alert setup.

avant-hier

Notes de version

Version 316: Add Momentum Trend change alert.

kgiap123

Contact me to learn Turtle Trading System, MCDX and other indicators (t.me/SgxFx)

tradingview.com/script/mbiUr95n-MCDX-Plus/
tradingview.com/script/mcAidXIT-FiFT-Pro/
tradingview.com/script/viAR3Ilo-Trend-Sign

Aussi sur:

Script sur invitation seulement

L'accès à ce script est limité aux utilisateurs autorisés par l'auteur et nécessite généralement un paiement. Vous pouvez l'ajouter à vos favoris, mais vous ne pourrez l'utiliser qu'après avoir demandé et obtenu l'autorisation de son auteur. Contactez kgiap123 pour plus d'informations, ou suivez les instructions de l'auteur ci-dessous.

TradingView ne suggère pas de payer pour un script et de l'utiliser à moins que vous ne fassiez confiance à 100% à son auteur et que vous compreniez comment le script fonctionne. Dans de nombreux cas, vous pouvez trouver une bonne alternative open-source gratuite dans nos Scripts communautaires.

Instructions de l'auteur

″Please contact me privately to request for access. After subscription, this indicator will appear under "Invite-Only" script

Vous voulez utiliser ce script sur un graphique ?

Avertissement: veuillez lire avant de demander l'accès.

kgiap123

Aussi sur:

Clause de non-responsabilité

Les informations et les publications ne sont pas destinées à être, et ne constituent pas, des conseils ou des recommandations en matière de finance, d'investissement, de trading ou d'autres types de conseils fournis ou approuvés par TradingView. Pour en savoir plus, consultez les Conditions d'utilisation.