INVITE-ONLY SCRIPT
Mis à jour Price Action Toolkit | Flux Charts
💎 GENERAL OVERVIEW
Introducing our new Price Action Toolkit [MTF] indicator! Price Action Toolkit integrates key level strategy, traditional supply-demand analysis, and market structures to help traders in their decisions. Now with features that are available to use in multiple timeframes!
Features of the new Price Action Toolkit [MTF] indicator :
📌 HOW DOES IT WORK ?
We believe that the analytical elements that are within this indicator work best when they co-exist with each other on the chart. Trading often requires taking multiple elements into consideration for better accuracy on market analysis. Thus, we combined some of the useful strategies in one indicator for ease of use.
1. Volumized Fair Value Gaps
Fair value gaps often occur when there is an imbalance in the market, and can be spotted with a specific formation on the chart.
The volume when the FVG occurs plays an important role when determining the strength of it, so we've placed two bars on the FVG zone, indicating the high & low volumes of the FVG. The high volume is the total volume of the last two bars on a bullish FVG, while the low volume is [total volume] - [high volume] of the FVG. For a bearish FVG, the total volume of the last two bars is the low volume. The indicator can also detect FVGs that exist in other timeframes than the current chart.
2. Volumized Order Blocks
Order blocks occur when there is a high amount of market orders exist on a price range. It is possible to find order blocks using specific formations on the chart.
The high & low volume of order blocks should be taken into consideration while determining their strengths. The determination of the high & low volume of order blocks are similar to FVGs, in a bullish order block, the high volume is the last 2 bars' total volume, while the low volume is the oldest bar's volume. In a bearish order block scenerio, the low volume becomes the last 2 bars' total volume.
3. Volumized Breaker Blocks
Breaker blocks form when an order block fails, or "breaks". It is often associated with market going in the opposite direction of the broken order block, and they can be spotted by following order blocks and finding the point they get broken, ie. price goes below a bullish order block.
The volume of a breaker block is simply the total volume of the bar that the original order block is broken. Often the higher the breaking bar's volume, the stronger the breaker block is.
4. Market Structures
Sometimes specific market structures form and break as the market fills buy & sell orders. Formed Change of Character (CHoCH) and Break of Structure (BOS) often mean that market will change direction, and they can be spotted by inspecting low & high pivot points of the chart.
5. Equal Highs & Lows
Equal Highs & Lows occur when there is a significant amount of difference between a candle's close price and it's high / low value, and it happens again in a specific range. EQH and EQL usually mean there is a resistance that blocks the price from going further up / down.
6. Buyside & Sellside Liquidity
Buyside & Sellside Liquidity zones are where most traders place their take-profits and stop-losses in their long / short positions. They are spotted by using high & low pivot points on the chart.
7. Premium & Discount Zones
The premium zone is a zone that is over the fair value of the asset's price, and the discount zone is the opposite. They are formed by the latest high & low pivot points.
8. MTF Highs / Lows
MTF Highs / Lows are actually pretty self-explanatory, you can enable / disable Daily, Weekly, Monthly & Pre-Market Highs and Lows.
🚩UNIQUENESS
Our new indicator offers a comprehensive toolkit for traders, combining multiple analytical elements with customizable settings to aid in decision-making across different market conditions and timeframes. The volumetric information of both FVGs and Order & Breaker Blocks will be present in your chart to serve you greater detail about them. The indicator also efficiently identifies market structures, liquidity zones and premium & discount zones to give you an insight about the current state of the market. And finally with the use of multiple timeframes, you can easily take a look at the bigger picture. We recommend reading the "How Does It Work" section of the descripton to get a better understanding about how this indicator is unique to others.
⚙️SETTINGS
1. General Configuration
Show Historic Zones -> This will show historic Fair Value Gaps, Order & Breaker Blocks and Sellside & Buyside liquidities which are expired.
2. Fair Value Gaps
Enabled -> Enables / Disables Fair Value Gaps
Volumetric Info -> The volumetric information of the FVG Zones will be rendered if activated.
Zone Invalidation -> Select between Wick & Close price for FVG Zone Invalidation.
Zone Filtering -> With "Average Range" selected, algorithm will find FVG zones in comparison with average range of last bars in the chart. With the "Volume Threshold" option, you may select a Volume Threshold % to spot FVGs with a larger total volume than average.
FVG Detection -> With the "Same Type" option, all 3 bars that formed the FVG should be the same type. (Bullish / Bearish). If the "All" option is selected, bar types may vary between Bullish / Bearish.
Detection Sensitivity -> You may select between Low, Normal or High FVG detection sensitivity. This will essentially determine the size of the spotted FVGs, with lower sensitivies resulting in spotting bigger FVGs, and higher sensitivies resulting in spotting all sizes of FVGs.
3. Order Blocks
Enabled -> Enables / Disables Order Blocks
Volumetric Info -> The volumetric information of the Order Blocks will be rendered if activated.
Zone Invalidation -> Select between Wick & Close price for Order Block Invalidation.
Swing Length -> Swing length is used when finding order block formations. Smaller values will result in finding smaller order blocks.
4. Breaker Blocks
Enabled -> Enables / Disables Breaker Blocks
Volumetric Info -> The volumetric information of the Breaker Blocks will be rendered if activated.
Zone Invalidation -> Select between Wick & Close price for Breaker Block Invalidation.
5. Timeframes
You can set and enable / disable up to 3 timeframes. Note that only higher timeframes than the current chart will work.
6. Market Structures
Break Of Structure (BOS) -> If the current structure of the market is broken in a bullish or bearish direction, it will be displayed.
Change Of Character (CHoCH) -> If the market shifts into another direction, it will be displayed.
Change Of Character+ (CHoCH+) -> This will display stronger Change Of Characters if enabled.
7. Equal Highs & Lows
EQH -> Enables / Disables Equal Highs.
EQL -> Enables / Disables Equal Lows.
ATR Multiplier (0.1 - 1.0) -> Determines the maximum difference between highs / lows to be considered as equal. Lower values will result in more accurate results.
8. Buyside & Sellside Liquidity
Zone Width -> Determines the width of the liquidity zones, 1 = 0.025%, 2 = 0.05%, 3 = 0.1%.
9. Premium & Discount Zones
Enabled -> Enables / Disables Premium & Discount Zones.
10. MTF Highs / Lows
You can enable / disable Daily, Weekly, Monthly & Pre-Market Highs and Lows using this setting. You can also switch their line shapes between solid, dashed and dotted.
Introducing our new Price Action Toolkit [MTF] indicator! Price Action Toolkit integrates key level strategy, traditional supply-demand analysis, and market structures to help traders in their decisions. Now with features that are available to use in multiple timeframes!
Features of the new Price Action Toolkit [MTF] indicator :
- Volumized Fair Value Gaps (FVGs)
- Volumized Order & Breaker Blocks
- Identification of Market Structures
- Equal Highs & Lows
- Buyside & Sellside Liquidity
- Premium & Discount Zones
- MTF Highs & Lows (Daily, Weekly, Monthly, Pre-Market)
- Customizable Settings
📌 HOW DOES IT WORK ?
We believe that the analytical elements that are within this indicator work best when they co-exist with each other on the chart. Trading often requires taking multiple elements into consideration for better accuracy on market analysis. Thus, we combined some of the useful strategies in one indicator for ease of use.
1. Volumized Fair Value Gaps
Fair value gaps often occur when there is an imbalance in the market, and can be spotted with a specific formation on the chart.
The volume when the FVG occurs plays an important role when determining the strength of it, so we've placed two bars on the FVG zone, indicating the high & low volumes of the FVG. The high volume is the total volume of the last two bars on a bullish FVG, while the low volume is [total volume] - [high volume] of the FVG. For a bearish FVG, the total volume of the last two bars is the low volume. The indicator can also detect FVGs that exist in other timeframes than the current chart.
2. Volumized Order Blocks
Order blocks occur when there is a high amount of market orders exist on a price range. It is possible to find order blocks using specific formations on the chart.
The high & low volume of order blocks should be taken into consideration while determining their strengths. The determination of the high & low volume of order blocks are similar to FVGs, in a bullish order block, the high volume is the last 2 bars' total volume, while the low volume is the oldest bar's volume. In a bearish order block scenerio, the low volume becomes the last 2 bars' total volume.
3. Volumized Breaker Blocks
Breaker blocks form when an order block fails, or "breaks". It is often associated with market going in the opposite direction of the broken order block, and they can be spotted by following order blocks and finding the point they get broken, ie. price goes below a bullish order block.
The volume of a breaker block is simply the total volume of the bar that the original order block is broken. Often the higher the breaking bar's volume, the stronger the breaker block is.
4. Market Structures
Sometimes specific market structures form and break as the market fills buy & sell orders. Formed Change of Character (CHoCH) and Break of Structure (BOS) often mean that market will change direction, and they can be spotted by inspecting low & high pivot points of the chart.
5. Equal Highs & Lows
Equal Highs & Lows occur when there is a significant amount of difference between a candle's close price and it's high / low value, and it happens again in a specific range. EQH and EQL usually mean there is a resistance that blocks the price from going further up / down.
6. Buyside & Sellside Liquidity
Buyside & Sellside Liquidity zones are where most traders place their take-profits and stop-losses in their long / short positions. They are spotted by using high & low pivot points on the chart.
7. Premium & Discount Zones
The premium zone is a zone that is over the fair value of the asset's price, and the discount zone is the opposite. They are formed by the latest high & low pivot points.
8. MTF Highs / Lows
MTF Highs / Lows are actually pretty self-explanatory, you can enable / disable Daily, Weekly, Monthly & Pre-Market Highs and Lows.
🚩UNIQUENESS
Our new indicator offers a comprehensive toolkit for traders, combining multiple analytical elements with customizable settings to aid in decision-making across different market conditions and timeframes. The volumetric information of both FVGs and Order & Breaker Blocks will be present in your chart to serve you greater detail about them. The indicator also efficiently identifies market structures, liquidity zones and premium & discount zones to give you an insight about the current state of the market. And finally with the use of multiple timeframes, you can easily take a look at the bigger picture. We recommend reading the "How Does It Work" section of the descripton to get a better understanding about how this indicator is unique to others.
⚙️SETTINGS
1. General Configuration
Show Historic Zones -> This will show historic Fair Value Gaps, Order & Breaker Blocks and Sellside & Buyside liquidities which are expired.
2. Fair Value Gaps
Enabled -> Enables / Disables Fair Value Gaps
Volumetric Info -> The volumetric information of the FVG Zones will be rendered if activated.
Zone Invalidation -> Select between Wick & Close price for FVG Zone Invalidation.
Zone Filtering -> With "Average Range" selected, algorithm will find FVG zones in comparison with average range of last bars in the chart. With the "Volume Threshold" option, you may select a Volume Threshold % to spot FVGs with a larger total volume than average.
FVG Detection -> With the "Same Type" option, all 3 bars that formed the FVG should be the same type. (Bullish / Bearish). If the "All" option is selected, bar types may vary between Bullish / Bearish.
Detection Sensitivity -> You may select between Low, Normal or High FVG detection sensitivity. This will essentially determine the size of the spotted FVGs, with lower sensitivies resulting in spotting bigger FVGs, and higher sensitivies resulting in spotting all sizes of FVGs.
3. Order Blocks
Enabled -> Enables / Disables Order Blocks
Volumetric Info -> The volumetric information of the Order Blocks will be rendered if activated.
Zone Invalidation -> Select between Wick & Close price for Order Block Invalidation.
Swing Length -> Swing length is used when finding order block formations. Smaller values will result in finding smaller order blocks.
4. Breaker Blocks
Enabled -> Enables / Disables Breaker Blocks
Volumetric Info -> The volumetric information of the Breaker Blocks will be rendered if activated.
Zone Invalidation -> Select between Wick & Close price for Breaker Block Invalidation.
5. Timeframes
You can set and enable / disable up to 3 timeframes. Note that only higher timeframes than the current chart will work.
6. Market Structures
Break Of Structure (BOS) -> If the current structure of the market is broken in a bullish or bearish direction, it will be displayed.
Change Of Character (CHoCH) -> If the market shifts into another direction, it will be displayed.
Change Of Character+ (CHoCH+) -> This will display stronger Change Of Characters if enabled.
7. Equal Highs & Lows
EQH -> Enables / Disables Equal Highs.
EQL -> Enables / Disables Equal Lows.
ATR Multiplier (0.1 - 1.0) -> Determines the maximum difference between highs / lows to be considered as equal. Lower values will result in more accurate results.
8. Buyside & Sellside Liquidity
Zone Width -> Determines the width of the liquidity zones, 1 = 0.025%, 2 = 0.05%, 3 = 0.1%.
9. Premium & Discount Zones
Enabled -> Enables / Disables Premium & Discount Zones.
10. MTF Highs / Lows
You can enable / disable Daily, Weekly, Monthly & Pre-Market Highs and Lows using this setting. You can also switch their line shapes between solid, dashed and dotted.
Notes de version
- Added "Volume Imbalances" feature.
The indicator can now detect volume imbalances on the chart. Volume imbalances are typically detected by looking at the gaps between close & open values of bars in series.
Settings
Enabled -> Enables / Disables the Volume Imbalances feature.
Gap Size -> The occured gap's size of the volume imbalance to be detected. Low = 0.1%, Normal = 0.25%, High = 0.5%. Higher settings will result in less volume imbalances detected.
Disable Overnight Gaps -> If enabled, gaps that occur between market close & market open will not be evaluated.
Notes de version
- Added a style setting to change the default text color
- Improved detection of EQL & EQH lines by making sure the first low is always lower than the second low, and the first high is always higher than the second high
Notes de version
- Fixed a bug with EQL & EQH
Notes de version
- Fixed a bug that sometimes caused flickering of rendered zones
Notes de version
Added alerts for:- Fair Value Gaps
- Order Blocks
- Breaker Blocks
- BOS
- CHoCH
- CHoCH+
Notes de version
- Added a "Zone Count" setting to the Order & Breaker Blocks feature, so you can adjust how many of them you want to see in your chart.
Notes de version
- Fixed an error that sometimes occur when using multiple timeframes.
Notes de version
- Added alert functionality for "EQH" and "EQL" structures.
Notes de version
- Fixed a rare bug happening with bigger candles.
Notes de version
- Improved General Reliability
- Added a new setting "Allow Gaps Between Bars". On tickers that can have a different opening price than the previous bar's closing price, the indicator will not analyze those bars for FVGs if disabled. For Example, if the today's opening price is different from the yesterday's closing price in a stock ticker.
Notes de version
- Added CHoCH / CHoCH+ Bar Coloring Feature
- Added Inversion Fair Value Gaps
- Added Liquidity Grabs
- Improved Liquidity Zones visibility.
- Added alert functionality for new features.
- Improved overall optimization.
Notes de version
- Added rendering option to hide further zones
Notes de version
- Enabling IFVGs no longer requires FVGs to be enabled
- Improved FVG Detection method
Notes de version
- Changed the default setting of "Max Distance Of Last Bar" to "Normal" from "High" to reduce memory errors
Notes de version
- Added Bullish & Bearish Volume Imbalance Alerts
Notes de version
- Added New Volume Imbalance Sensitivity Settings
- Session Highlighting Mode (New York, London, Frankfurt, Asia)
- Various Fixes
Notes de version
- Updated session name formatting.
Notes de version
- Updated order & breaker block detection consistency across indicators.
Notes de version
- Improved Premium & Discount Zone Detection
- Fixes to some alert re-trigger issues
Notes de version
- Improved visuals on tickers without volume information.
- Improved reliability for alerts.
Notes de version
- Added AM, Lunch & PM Sessions
- Improved Session Visuals
Notes de version
- Fixed a rare error that FVG misrenderings
- Revised FVG "Allow Gaps Between Bars" option to not allow any gaps when disabled
- Fixed a problem where Past Day / Week / Month Lows & Highs were sometimes misaligned
- Various Optimizations
Notes de version
Notes de version
- Shorter labels setting for Past Day / Week / Month Highs & Lows
- Past Day / Week / Month Open Levels
Notes de version
- Various fixes for Previous Day / Week / Month Levels
Notes de version
- You can now enable / disable combination of zones for FVGs & Order Blocks.
Notes de version
- Fixed various MTF issues
Notes de version
Notes de version
- Non-Invalidated zones now extend 10 candlesticks further from the latest candlestick for visual clarity
- Fair Value Gaps now start from first bar of their formation instead of the last bar
- Order Block & Fair Value Gap Invalidations now default to "Close" instead of "Wick"
- Aligned Session Names in settings
Notes de version
- Non-Invalidated zones now extend 10 candlesticks further from the latest candlestick for visual clarity
- Fair Value Gaps now start from first bar of their formation instead of the last bar
- Order Block & Fair Value Gap Invalidations now default to "Close" instead of "Wick"
- Aligned Session Names in settings
Notes de version
- Converted Script to PineScript v6
- Various Optimizations & Fixes
Notes de version
- Solved pre-market levels disappearing after a while.
- Consecutive sessions now align properly.
- Various optimizations.
Notes de version
- Show Historic Zones setting is now disabled by default
- Improved combination of overlapping zones feature
- Fixed a problem that caused market structres to appear across gaps in the chart
Notes de version
- Fixed a bug where the liquidity zone width setting didn't apply correctly.
- Various Optimizations
Notes de version
The Price Action Toolkit had a massive rework! All features are now optimized for faster loading & runtime speeds. You can find the full patch notes below:- Removed Max Distance To Last Bar setting. The script now always runs on the maximum bars possible.
Fair Value Gaps:
- Fair Value Gap detection method was improved for efficiency
- REMOVED: Zone Filtering setting
- REMOVED: Volume Threshold % setting
- NEW: "All" Detection Method. This detects both same & mixed FVGs.
- UPDATED: The sensitivity setting is now an integer value between 0-25, 0 Detects all FVGs while higher values filter out smaller gaps.
- NEW: Midline setting
Inversion Fair Value Gaps:
- NEW: Midline setting
Order Blocks:
- Order Block detection was changed for efficiency and faster detection
- UPDATED: Swing Length setting is now "Sensitivity". Lower sensitivity will detect more order blocks.
Breaker Blocks:
- NEW: Midline setting
Volume Imbalances:
- UPDATED: The sensitivity setting is now an integer value between 0-10. 0 Detects all VIs while higher values filter out smaller imbalances.
- NEW: Midline setting
- NEW: You can now change Volume Imbalance colors
MTF Highs / Lows:
- NEW: Shorter Lines setting.
Sessions:
NEW: Session boxes now extend until their corresponding end time immediately
Style:
NEW: Text Size setting
Notes de version
Added label settings for:- Fair Value Gaps
- Order Blocks
- Sellside / Buyside Liquidity
- Volume Imbalances
Note that enabling the setting for Order Blocks & FVGs will enable them for Breaker Blocks & IFVGs as well.
Notes de version
Renamed to Flux Charts® - Price Action ToolkitNotes de version
- Improved general FVG Detection conditions.
Notes de version
- The default FVG Sensitivity is set to 2 instead of 0
- When FVG Sensitivity is set to 0 now, all FVGs will be detected, regardless of their size
Notes de version
- Added Midline setting for Order Blocks
- Fixed an issue where pre-market levels were not rendering correctly.
- Renamed Shorter Lines & Shorter Labels setting on for the MTF Highs / Lows settings
Notes de version
- The Premium & Discount zones were updated to have better visual clarity, and the their labels can now be toggled on / off.
- Various changes & fixes for dependent scripts.
Notes de version
- Bullish & Bearish Order Blocks can no longer overlap with each other.
- Order Blocks will not be detected if they are too close to each other.
- Fixed an issue where "Same" & "Mixed" settings did not work properly for FVG detection.
- IFVG & Breaker Block detection is improved.
- Fixed an issue where Bullish BOS could be lower than the previous Bullish BOS & Bearish BOS could be higher than the previous Bearish BOS.
Notes de version
- Fixed an issue with the new Order Block detection logic that could cause excess removal of some Order Blocks.
Notes de version
- New "Trendlines" Feature! Effortlessly identify the prevailing direction of price action with the new Trendlines feature. Enable it to have significant support and resistance lines automatically drawn on your chart. These lines dynamically adjust as new price data comes in, offering a clear visual representation of the current trend. Watch for price interactions with these lines, as breakouts or bounces can provide potential trading signals. You can enable / disable alerts for detection of bullish & bearish trendlines.
Notes de version
- Trendlines are now enabled by default.
- Improvements for Break of Structure (BOS) and Change of Character (CHoCH) detection.
- Zones that are too far away from the current price will be now hidden for a clearer view.
- Order Block detection was improved and the combine zones setting was removed.
Notes de version
- NEW! Visible Extended Zones setting. You can now set the amount of bullish & bearish zones that will be extended. This applies for Order Blocks, Breaker Blocks, FVGs, IFVGs & Trendlines.
- Removed the logic to hide zones that are far away from the current price.
Notes de version
- Resolved an issue where certain order blocks were being detected too close together.
Notes de version
- Added retest alerts for bullish and bearish Order Blocks
Script sur invitation seulement
Seuls les utilisateurs approuvés par l'auteur peuvent accéder à ce script. Vous devrez demander et obtenir l'autorisation pour l'utiliser. Celle-ci est généralement accordée après paiement. Pour plus de détails, suivez les instructions de l'auteur ci-dessous ou contactez directement fluxchart.
TradingView ne recommande PAS de payer ou d'utiliser un script à moins que vous ne fassiez entièrement confiance à son auteur et que vous compreniez comment il fonctionne. Vous pouvez également trouver des alternatives gratuites et open-source dans nos scripts communautaires.
Instructions de l'auteur
Get instant access at https://www.fluxcharts.com/
Access Flux Charts' exclusive indicators: fluxcharts.com/
Join our Discord community: discord.gg/FluxCharts
Join our Discord community: discord.gg/FluxCharts
Clause de non-responsabilité
Les informations et les publications ne sont pas destinées à être, et ne constituent pas, des conseils ou des recommandations en matière de finance, d'investissement, de trading ou d'autres types de conseils fournis ou approuvés par TradingView. Pour en savoir plus, consultez les Conditions d'utilisation.
Script sur invitation seulement
Seuls les utilisateurs approuvés par l'auteur peuvent accéder à ce script. Vous devrez demander et obtenir l'autorisation pour l'utiliser. Celle-ci est généralement accordée après paiement. Pour plus de détails, suivez les instructions de l'auteur ci-dessous ou contactez directement fluxchart.
TradingView ne recommande PAS de payer ou d'utiliser un script à moins que vous ne fassiez entièrement confiance à son auteur et que vous compreniez comment il fonctionne. Vous pouvez également trouver des alternatives gratuites et open-source dans nos scripts communautaires.
Instructions de l'auteur
Get instant access at https://www.fluxcharts.com/
Access Flux Charts' exclusive indicators: fluxcharts.com/
Join our Discord community: discord.gg/FluxCharts
Join our Discord community: discord.gg/FluxCharts
Clause de non-responsabilité
Les informations et les publications ne sont pas destinées à être, et ne constituent pas, des conseils ou des recommandations en matière de finance, d'investissement, de trading ou d'autres types de conseils fournis ou approuvés par TradingView. Pour en savoir plus, consultez les Conditions d'utilisation.