Commencez

Bandes de Bollinger (BB)

VWAP Bollinger BandsWhat makes this different from vwap bands / bollinger bands? This indicator takes a bit of inspiration from bollinger but instead of utilizing built in pine script std dev that uses simple moving average internally, this version replaces that with vwap. Also instead of traditional bollinger band basis of 20 period simple moving average, the basis here for the bands is the vwap. How to use it? Usage is similar to vwap itself, though the standard deviation bands will expand and contract like normal bollinger bands instead of vwap bands that just widen as the market movement continues. The bands tell a slightly different story from bollinger bands as the underlying data utilized is the vwap itself. Which markets is this meant for? Any market. What conditions? This aids in finding conditions of entry standard to vwap, but the bands could give key areas of focus for entries and exits better than standard bollinger bands or vwap bands.
Indicateur Pine Script™
par syntaxgeek
4
IS 200EMABB long buy and sellThis script backtested some stocks, it's giving soft buy and strong buy signals, I am using Bollinger band and 200 EMA, Strong Buy :- If price is above 200 ema and cross over 10d ema and sma setup with BB, Buy :- If price is below 200 ema and cross over 10d ema and sma setup with BB, Strong Sell :- If price is below 200 ema and cross over ema and sma with input setup for BB Sell :- If price is above 200 ema and cross over ema and sma with input setup for BB Don't consider it as buy and sell call, do your own research ,i did it according to my experience and learning. Thank you
Indicateur Pine Script™
par ishroid
1
DB KCBB%D Wave SignalsDB KCBB%D Wave Signals What does the indicator do? This indicator is a version of my DB KCBB%D indicator updated with signal detection. It results from weeks of analysis of the KCBB%D waves for patterns. I'm releasing it publicly to help those who like the KCBB%D indicator but desire a version with signals built into it. The indicator plots the percent difference between the low and high prices against a combined Kelpler Channel Bollinger Bands for the current timeframe. The low percent difference and the high percent difference each have their own waves plotted. A mirror mode default allows both waves to be visualized in a mirrored plot that clearly shows when outer bands are present and when they swap. Each percent difference band is displayed with a 1 bar lookback to visualize local tops/bottoms. The overall trend is displayed using two sets of green/red colors on the percent difference waves so that each wave is recognizable, but the overall price trend is visible. A fast 3 SMA is taken of each percent difference wave to obtain the overall trend and then averaged together. The trend is then calculated based on direction from the previous bar period. How should this indicator be used? By default, the indicator will display in a mirror mode which will display both the low and high percent change waves mirrored to allow for the most pattern recognition possible. You will notice the percent difference waves swap from inner to outer, showing the overall market direction for that timeframe. When each percent difference wave interacts with the zero line, it indicates either buys or sells opportunities depending on which band is on the inside. When the inner wave crosses zero, special attention should be paid to the outer wave to know if it's a significant move. Likewise, when the outer wave peaks, it can indicate buy or sell opportunities depending on which wave is on the outside. A zero line and other lines are displayed from the highest of the high percent difference wave over a long period of time. The lines can measure movement and possible oversold/overbought locations or large volatility . You can also use the lines for crossing points for either wave as alerts to know when to buy or sell zones are happening. When individual percent difference waves are designed to be reviewed without mirroring, the mirror checkbox can be unchecked in the settings. Doing so will display both the high and low percent difference waves separately. Using this display, you can more cleanly review how each wave interacts with various line levels. For those who desire to only have half of the mirror or one set of waves inverted against each other, check the "mirrored" and the "mirrored flipped" checkboxes in the settings. Doing so will display the top half of the mirror indicator, which is the low percent difference wave with the high percent difference wave inverted. The indicator will also change the background color of its own pane to indicate possible buy/sell periods (work in progress). Does the indicator include any alerts? Yes, they are a work in progress but starting out with this release, we have: NOTE: This is an initial release version of this indicator. Please do not use these alerts with bots yet, as they will repaint in real-time. NOTE: A later release may happen that will delay firing the events until 1/2 of the current bar time has passed. NOTE: As with any indicator, watch your upper timeframe waves first before zooming into lower. DB KCBB%D Buy Signal DB KCBB%D Buy Warning Signal DB KCBB%D Sell Signal DB KCBB%D Sell Warning Signal DB KCBB%D Death Cross Sell Signal DB KCBB%D Trend Up Alert DB KCBB%D Trend Down Alert Use at your own risk and do your own diligence. Enjoy!
Indicateur Pine Script™
par thefluffyones
Bollinger Bands Scalper + VWAPGet more consistent scalps by trading in-between Bollinger Band Deviations. FEATURES: 1) 3 Bollinger Bands with default settings to 1, 2, and 3 deviations for more consistent scalps 2) Trendicator: a dynamic color changing moving average that helps you see trend quickly 3) Robust VWAP tool with up to 3 different deviations as well as different anchor points to help you see strong support and resistances 4) Calming "purple cloud" color palette helps you focus on price action 5) Discover new trading strategies with a wide range of customizability
Indicateur Pine Script™
par primalstef
11
J2S Backtest: Steven Primo`s Big Trend StrategyIs it possible to benefit from big trend moves? In this study I present you a strategy that aims to capture big trend moves. Created by trader Steven Primo, The Big Trend strategy is advocates and shared through his YouTube channel without restrictions. Note: This is not an investment recommendation. The purpose of this study is only to share knowledge with the community on TradingView. What is the purpose of the strategy? The strategy focuses on capturing the movement of trends, providing an entry signal for both LONG and SHORT positions. To which time-frame of a chart is it applicable to? According to the author, it is applicable to any chart in different markets. What about risk management? The author does not establish a risk management model for strategy. This is left to the definition of each trader. How are the trends identified in this strategy? A 20-periods Bollinger Bands with 0.382 deviation should be plotted on the chart. Prices above the upper band indicate an uptrend, on the other hand, prices below the lower band indicate an downtrend. Finally, prices between the two bands indicate sideways trend. How to identify a signal for LONG entry? The signal is given after five consecutive closes above the upper Bollinger band. After that, you must enter the trade after the first trade occurs above the high of the signal bar. How to identify a signal for SHORT entry? The signal is given after five consecutive closes below the lower Bollinger band. After that, you must enter the trade after the first trade occurs below the low of the signal bar. Tips and tricks In my backtest, I tried to prove the strategy from a position trading perspective, so I proposed use fixed stop-loss and take-profits. The stop-loss is defined as being low of the first bar that generated the movement until the signal bar. The value range from the stop-loss to the signal bar is used in determining the profit target. Given any trade, position closing will be triggered when the bar trading limit is reached. Backtest features Backtest parameters are fully customizable, for instance: number of bars inside a trend indicating trend maturity for entry, bar limit for trading entry (after a buy or sell signals). Also, the user chooses to validate only LONG or SHORT entries, or both. It is also possible to determine the specific time period for running the backtests. Final message In my tests, I noticed excellent results for other crypto pairs, for example: ETH/USDT, BNB/USDT, FIL/USDT, GALA/USDT and ILV/USDT. Of course, no one strategy works perfectly for every asset, crypto, and bond out there. That's why we should explore each trading model and carry out our backtests. Please, feel free to provide me with any improvement suggestions for the backtest script. Bear in mind, feel free to use the ideas in my script in your studies.
Stratégie Pine Script™
par julianossilva
2
BBSS - Bollinger Bands Scalping SignalsModified Bollinger Bands Indicator Added: - color change divergence (green) and narrowing (red) of the upper and lower bands - color change of the moving average - upward trend (green) and downward trend (red) - the appearance of a potential signal for long and short positions when the candle closes behind the upper or lower bands. How to use the indicator: Long conditions: - the price breaks through the upper band - Bollinger bands are expanding and should be green - the mid-line is green - the trigger candle should be green Short conditions: - the price breaks through the lower band - Bollinger bands are expanding and should be red - the mid-line is red - the trigger candle should be red
Indicateur Pine Script™
par berezitskysl
2
DB KCBB%D WavesDB KCBB%D Waves What does the indicator do? The indicator plots the percent difference between the low and high prices against a combined Kelpler Channel Bollinger Bands for the current timeframe. The low percent difference and the high percent difference each have their own waves plotted. A mirror mode default allows both waves to be visualized in a mirrored plot that clearly shows when outer bands are present and when they swap. Each percent difference band is displayed with a 1 bar lookback to visualize local tops/bottoms. The overall trend is displayed using two sets of green/red colors on the percent difference waves so that each wave is recognizable, but the overall price trend is visible. A fast 3 SMA is taken of each percent difference wave to obtain the overall trend and then averaged together. The trend is then calculated based on direction from the previous bar period. How should this indicator be used? By default, the indicator will display in a mirror mode which will display both the low and high percent change waves mirrored to allow for the most pattern recognition possible. You will notice the percent difference waves swap from inner to outer, showing the overall market direction for that timeframe. When each percent difference wave interacts with the zero line, it indicates either buys or sells opportunities depending on which band is on the inside. When the inner wave crosses zero, special attention should be paid to the outer wave to know if it's a significant move. Likewise, when the outer wave peaks, it can indicate buy or sell opportunities depending on which wave is on the outside. A zero line and other lines are displayed from the highest of the high percent difference wave over a long period of time. The lines can measure movement and possible oversold/overbought locations or large volatility. You can also use the lines for crossing points for either wave as alerts to know when to buy or sell zones are happening. When individual percent difference waves are designed to be reviewed without mirroring, the mirror checkbox can be unchecked in the settings. Doing so will display both the high and low percent difference waves separately. Using this display, you can more cleanly review how each wave interacts with various line levels. For those who desire to only have half of the mirror or one set of waves inverted against each other, check the "mirrored" and the "mirrored flipped" checkboxes in the settings. Doing so will display the top half of the mirror indicator, which is the low percent difference wave with the high percent difference wave inverted. The indicator will also change the background color of its own pane to indicate possible buy/sell periods (work in progress). Does the indicator include any alerts? Yes, they are a work in progress but starting out with this release, we have: NOTE: This is an initial release version of this indicator. Please do not use these alerts with bots yet, as they will repaint in real-time. NOTE: A later release may happen that will delay firing the events until 1/2 of the current bar time has passed. NOTE: As with any indicator watch your upper timeframe waves first before zooming into lower. DB KCBB%D Buy Zone Alert DB KCBB%D MEDIUM Buy Alert DB KCBB%D STRONG Buy Alert DB KCBB%D Sell Alert DB KCBB%D STRONG Sell Alert DB KCBB%D Trend Up Alert DB KCBB%D Trend Down Alert Use at your own risk and do your own diligence. Enjoy!
Indicateur Pine Script™
par thefluffyones
3
[SS]Multicolor BB with Squeez Moving Average & Colored BarsHello Followers, Hope u guyz doing well in the market. Came with a standalone Trading System which helps u with the trend & choppiness zone. This system is combination of multiple stretagies which makes it better than single published indicators. ========================================================================================================= We have used Variety-Filtered, Squeeze Moving Averages which is a chop zone indicator that identifies when price is below a specific volatility threshold calculated as the difference between a fast and slow moving average and filtered using ATR- or Pips-based threshold. This indicator can be use as both an entry and exit indicator. It identifies both chop zones and breakouts/breakdowns Uses:- When the candles turn white and the threshold bands appear on the chart, this is indicative of low volatility When price exits the threshold bands, price will usually explode up or down giving a long or short signal. This acts as a sort of squeeze momentum. Included: Bar coloring Signals Alerts, 4 types of alerts: Squeeze started, Squeeze ended, long, and short <<------------------------------------->> Multicolour Bollinger Bands indicator that indicates market phases. It plots on the price chart, thanks to different color zones between the bands, a breakdown of the different phases that the price operates during a trend. The different zones are identified as follows: - red color zone: trend is bearish , price is below the 200 periods moving average --> orange color zone: price operate a technical rebound below the 200 periods moving average - yellow color zone: (phase 1 which indicate a new bearish cycle) - light green zone: (phase 2 which indicate a new bullish cycle) --> dark green zone: trend is bullish , price is above the 200 periods moving average - grey color zone: calm phase of price/low volatility - dark blue color zone: price is consolidating in either bullish or bearish trend - light blue zones: price will revert to a new opposite trend (either long or short new trend) By identifying clearly the different market phases with the multicolor Bollinger bands , the market entries by either a the beginning of a new trend or just after a rebound or a consolidating phase is easier to spot on. <<==========================>> The credit of above indicator souce goes to loxx & Deveatt. I just backtested and modified it to increase accuracy of trade and clear visual representation for trades. Modified the trend based SMA and BB period and entry criteria. <<===========================>> <> 1) Look for BB COLOR and SMA for trend either up or down. 2) Look Bar coloring, enter when price above sma and green for long else short.
Indicateur Pine Script™
par World_of_Indicators
4
Bermaui Variety Averages Bands [Loxx]Bermaui Variety Averages Bands is a reverse Bollinger Bands indicator with Loxx's Variety Moving Averages and Loxx's Expanded Source Types. What are Bermaui Bands? Bermaui Bands (BB) is a technical analysis tool that help filter between ranging and trending price movements. A buy signal is made when price crosses above the upper band, a sell signal is made when price crosses below the bottom band. The idea is when the bands are far apart, this is low volatility; when the bands are close together, this is high volatility. Included Loxx's Expanded Source Types Loxx's Moving Averages Alerts Signals
Indicateur Pine Script™
par loxx
4
Crypto Breakout IndicatorHey Guys, The idea of the script is that accumalation and small pumps do happen before the big ones, therefore, i tried to create a breakout indicator that can tell that: the script components are: 1- Price to consolidate within 15% range between the highest of 6 candles and lowest of 6 candles 2- Price needs to breakout with minimum of 1% and maximum of 20% 3- Price needs to have sufficient volume, hence volume of current bar needs to be higher than previous one with 10% at least 4- RSI needs to be between 50 and 75 5- Bollinger Bands Percentage needs to be equal or lower than 1 6- Price is closing above EMA200 I tried to make all these numbers to be available for you guys through settings so you can tell me about any better settings!
Indicateur Pine Script™
par FittestTrader
Bollinger Bands and RSI Short Selling (by Coinrule)The Bollinger Bands are among the most famous and widely used indicators. A Bollinger Band is a technical analysis tool defined by a set of trendlines plotted two standard deviations (positively and negatively) away from a simple moving average ( SMA ) of a security's price, but which can be adjusted to user preferences. They can suggest when an asset is oversold or overbought in the short term, thus provide the best time for buying and selling it. The relative strength index ( RSI ) is a momentum indicator used in technical analysis . RSI measures the speed and magnitude of a security's recent price changes to evaluate overvalued or undervalued conditions in the price of that security. The RSI can do more than point to overbought and oversold securities. It can also indicate securities that may be primed for a trend reversal or corrective pullback in price. It can signal when to buy and sell. Traditionally, an RSI reading of 70 or above indicates an overbought situation. A reading of 30 or below indicates an oversold condition. The short order is placed on assets that present strong momentum when it's more likely that it is about to decrease further. The rule strategy places and closes the order when the following conditions are met: ENTRY The closing price is greater than the upper standard deviation of the Bollinger Bands The RSI is less than 70 EXIT The trade is closed in profit when the RSI is less than 70 Upper standard deviation of the Bollinger Band is greater than the the closing price. This strategy comes with a stop loss and a take profit, and as you can see by the results, it is well suited for a bear market. This trade works very well with ETH (1h timeframe), AVA (4h timeframe), and SOL (3h timeframe) and is backtested from the 1 December 2021 to capture how this strategy would perform in a bear market. To make the results more realistic, the strategy assumes each order to trade 30% of the available capital. A trading fee of 0.1% is taken into account. The fee is aligned to the base fee applied on Binance, which is the largest cryptocurrency exchange.
Stratégie Pine Script™
par Coinrule
1
Dynamic Zone of Bollinger Band Stops Line [Loxx]Dynamic Zone of Bollinger Band Stops Line is a Bollinger Band indicator with Dynamic Zones. This indicator serves as both a trend indicator and a dynamic stop-loss indicator. What are Bollinger Bands? A Bollinger Band is a technical analysis tool defined by a set of trendlines plotted two standard deviations (positively and negatively) away from a simple moving average (SMA) of a security's price, but which can be adjusted to user preferences. Bollinger Bands were developed and copyrighted by famous technical trader John Bollinger, designed to discover opportunities that give investors a higher probability of properly identifying when an asset is oversold or overbought. What are Dynamic Zones? As explained in "Stocks & Commodities V15:7 (306-310): Dynamic Zones by Leo Zamansky, Ph .D., and David Stendahl" Most indicators use a fixed zone for buy and sell signals. Here’ s a concept based on zones that are responsive to past levels of the indicator. One approach to active investing employs the use of oscillators to exploit tradable market trends. This investing style follows a very simple form of logic: Enter the market only when an oscillator has moved far above or below traditional trading lev- els. However, these oscillator- driven systems lack the ability to evolve with the market because they use fixed buy and sell zones. Traders typically use one set of buy and sell zones for a bull market and substantially different zones for a bear market. And therein lies the problem. Once traders begin introducing their market opinions into trading equations, by changing the zones, they negate the system’s mechanical nature. The objective is to have a system automatically define its own buy and sell zones and thereby profitably trade in any market — bull or bear. Dynamic zones offer a solution to the problem of fixed buy and sell zones for any oscillator-driven system. An indicator’s extreme levels can be quantified using statistical methods. These extreme levels are calculated for a certain period and serve as the buy and sell zones for a trading system. The repetition of this statistical process for every value of the indicator creates values that become the dynamic zones. The zones are calculated in such a way that the probability of the indicator value rising above, or falling below, the dynamic zones is equal to a given probability input set by the trader. To better understand dynamic zones, let's first describe them mathematically and then explain their use. The dynamic zones definition: Find V such that: For dynamic zone buy: P{X <= V}=P1 For dynamic zone sell: P{X >= V}=P2 where P1 and P2 are the probabilities set by the trader, X is the value of the indicator for the selected period and V represents the value of the dynamic zone. The probability input P1 and P2 can be adjusted by the trader to encompass as much or as little data as the trader would like. The smaller the probability, the fewer data values above and below the dynamic zones. This translates into a wider range between the buy and sell zones. If a 10% probability is used for P1 and P2, only those data values that make up the top 10% and bottom 10% for an indicator are used in the construction of the zones. Of the values, 80% will fall between the two extreme levels. Because dynamic zone levels are penetrated so infrequently, when this happens, traders know that the market has truly moved into overbought or oversold territory. Calculating the Dynamic Zones The algorithm for the dynamic zones is a series of steps. First, decide the value of the lookback period t. Next, decide the value of the probability Pbuy for buy zone and value of the probability Psell for the sell zone. For i=1, to the last lookback period, build the distribution f(x) of the price during the lookback period i. Then find the value Vi1 such that the probability of the price less than or equal to Vi1 during the lookback period i is equal to Pbuy. Find the value Vi2 such that the probability of the price greater or equal to Vi2 during the lookback period i is equal to Psell. The sequence of Vi1 for all periods gives the buy zone. The sequence of Vi2 for all periods gives the sell zone. In the algorithm description, we have: Build the distribution f(x) of the price during the lookback period i. The distribution here is empirical namely, how many times a given value of x appeared during the lookback period. The problem is to find such x that the probability of a price being greater or equal to x will be equal to a probability selected by the user. Probability is the area under the distribution curve. The task is to find such value of x that the area under the distribution curve to the right of x will be equal to the probability selected by the user. That x is the dynamic zone. Included Bar coloring Signals Alerts 3 types of signal smoothing
Indicateur Pine Script™
par loxx
1
Williams %R w/ Bollinger Bands [Loxx]Williams %R w/ Bollinger Bands is a Williams %R indicator with Bollinger bands. The Bollinger bands are used to determine when breakouts/breakdowns occur. What is Williams %R? Williams %R , also known as the Williams Percent Range, is a type of momentum indicator that moves between 0 and -100 and measures overbought and oversold levels. The Williams %R may be used to find entry and exit points in the market. The indicator is very similar to the Stochastic oscillator and is used in the same way. It was developed by Larry Williams and it compares a stock’s closing price to the high-low range over a specific period, typically 14 days or periods. Included: bar coloring signals alerts
Indicateur Pine Script™
par loxx
1