Commencez

Candlestick analysis

[ST] Flow CandlesThis indicator does not generate buy or sell signals. It translates the current market state into colors, allowing for fast and clean visual reading. The logic is simple: RSI + slope → show how the market is moving right now (flow). Relative volume → indicates how much conviction is behind that movement. LSVI (relative volatility) → defines when continuation is allowed, avoiding entries during chaotic volatility expansions. Color interpretation: Gray → neutral market / no clear asymmetry. Neon green → strong bullish trend, confirmed by volume. Strong red → strong bearish trend, confirmed by volume. Gold → continuation allowed after a spike (volatility compression + flow still active). This indicator was designed to work alongside SMC, Liquidity and FVG, acting as a flow and timing reader, not as an automatic entry system. SMC shows where. Volume shows effort. Colors show flow. Gold shows timing.
Indicateur Pine Script®
par cfsumbach
Linear Regression Blend Candles [Adaptive]Regression Blend Candles A hybrid candle system that blends standard OHLC candles with linear regression candles at a user-defined ratio. The result is a cleaner price representation that filters noise while preserving market structure. Adaptive modes automatically adjust the blend based on market conditions. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 𝗛𝗢𝗪 𝗜𝗧 𝗪𝗢𝗥𝗞𝗦 The indicator calculates linear regression values for each OHLC component over a lookback period, then blends them with regular candle values based on your blend percentage. At 0% you see pure price action; at 100% you see full regression candles; anything between gives you a mix. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 𝗙𝗘𝗔𝗧𝗨𝗥𝗘𝗦 ◽ Blend Control Set a fixed blend percentage or enable adaptive mode. The blend slider lets you dial in exactly how much smoothing you want—useful for finding the sweet spot between noise reduction and signal responsiveness. ◽ Adaptive Blend Modes Let the market decide the blend ratio: • ATR — Higher volatility increases LR blend to filter chop • StdDev — Similar concept using standard deviation • ATR + StdDev — Combines both volatility measures • R-Squared — Increases blend when price fits a linear trend well (high R² = clean trend = trust the regression more) • R² + ATR — Combines trend quality with volatility for a balanced approach ◽ R-Squared Thresholds Fine-tune when the R² adaptive mode kicks in. Below the low threshold, blend stays at minimum. Above the high threshold, blend reaches maximum. This prevents over-smoothing during choppy, non-linear price action. ◽ Post-LR Smoothing Apply additional smoothing to the regression values before blending: • ALMA — Arnaud Legoux Moving Average with offset/sigma control • Kalman — Adaptive filter that balances responsiveness and smoothness • KAMA — Kaufman Adaptive MA that adjusts to market efficiency ◽ Advanced LR Mode Enable weighted regression with exponential decay (emphasizes recent bars) and lag correction (extrapolates based on velocity to reduce inherent LR lag). ◽ Ghost Candles Display faded regular candles behind the blended candles to visualize the difference and spot divergences between raw price and the smoothed representation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 𝗦𝗨𝗚𝗚𝗘𝗦𝗧𝗘𝗗 𝗦𝗘𝗧𝗨𝗣𝗦 𝟭. 𝗧𝗿𝗲𝗻𝗱 𝗖𝗹𝗮𝗿𝗶𝘁𝘆 (𝗦𝘄𝗶𝗻𝗴 𝗧𝗿𝗮𝗱𝗶𝗻𝗴) • LR Lookback: 14 • Blend %: 60-70% • Smoothing: None • Ghost Candles: On Use for cleaner swing identification. The higher blend percentage filters out intrabar noise while ghost candles let you see when price deviates significantly from the smoothed trend—potential reversal or continuation signals. 𝟮. 𝗔𝗱𝗮𝗽𝘁𝗶𝘃𝗲 𝗡𝗼𝗶𝘀𝗲 𝗙𝗶𝗹𝘁𝗲𝗿 (𝗜𝗻𝘁𝗿𝗮𝗱𝗮𝘆) • LR Lookback: 10 • Adaptive Blend: On • Mode: R² + ATR • Min/Max Blend: 25% / 75% • R² Thresholds: 0.3 / 0.8 Ideal for intraday trading on volatile instruments. The blend automatically increases during clean trends (high R²) and volatile moves (high ATR), then backs off during choppy consolidation to keep you closer to raw price action when the regression isn't fitting well. 𝟯. 𝗨𝗹𝘁𝗿𝗮-𝗦𝗺𝗼𝗼𝘁𝗵 (𝗛𝗶𝗴𝗵𝗲𝗿 𝗧𝗶𝗺𝗲𝗳𝗿𝗮𝗺𝗲 𝗕𝗶𝗮𝘀) • LR Lookback: 20 • Blend %: 80% • Smoothing: ALMA (offset 0.85, sigma 6) • Advanced LR: On (decay 0.9, lag correction 1.5) Maximum smoothing for identifying higher timeframe directional bias. The combination of longer lookback, high blend, ALMA smoothing, and lag correction creates a highly filtered view that cuts through noise. Best used on 4H+ charts or as a trend filter for lower timeframe entries.
Indicateur Pine Script®
par B3AR_Trades
1
The Blessed Trader Ph. | Double EMA + RSI (20) Strategy v1.0📊 The Blessed Trader Ph. Double EMA + RSI (20) Strategy — v1.0 1️⃣ Strategy Overview This is a trend-following breakout strategy designed to: Catch strong directional moves Filter out weak trades using momentum confirmation Control risk with ATR-based stop-loss and take-profit It works best in trending markets such as: Crypto (BTC, ETH, altcoins) Forex (major & minor pairs) Indices (NAS100, US30, SPX) 2️⃣ Indicators Used 🔹 Double EMA Channel EMA 20 High → Dynamic resistance EMA 20 Low → Dynamic support These two EMAs create a price channel: Break above → bullish strength Break below → bearish weakness Unlike a single EMA on close, using High & Low EMAs helps: Reduce fake breakouts Confirm real price expansion 🔹 RSI (20) Measures momentum strength RSI > 50 → bullish momentum RSI < 50 → bearish momentum RSI is used only as a filter, not as an overbought/oversold signal. 🔹 ATR (14) Measures market volatility Used to calculate: Stop Loss (1.5 × ATR) Take Profit (3.0 × ATR) This makes the strategy: Adaptive to any market Effective across timeframes 3️⃣ Trade Rules (Very Important) ✅ BUY (LONG) Conditions A buy trade is opened only when all conditions are met: Price closes above EMA 20 High RSI (20) is above 50 Candle is confirmed (bar close) ➡️ This means: “Price has broken resistance with strong momentum.” ❌ SELL / EXIT Conditions The long trade is closed when: Price closes below EMA 20 Low RSI (20) is below 50 ➡️ This signals: “Trend strength is weakening or reversing.” 🛑 Stop Loss & 🎯 Take Profit Stop Loss = Entry − (ATR × 1.5) Take Profit = Entry + (ATR × 3.0) Risk–Reward ≈ 1 : 2 This protects capital and lets winners run. 4️⃣ Why This Strategy Works ✔ Trades with the trend ✔ Avoids ranging markets ✔ Uses confirmation, not prediction ✔ Non-repainting (bar close only) ✔ Works on any timeframe 5️⃣ 🔥 Why Heikin Ashi Candles Improve Results What are Heikin Ashi candles? Heikin Ashi candles smooth price action by averaging price data instead of using raw OHLC values. Benefits for THIS strategy: ✅ 1. Cleaner Trend Detection Fewer false EMA breakouts Smoother closes above EMA High Stronger continuation signals ✅ 2. Reduced Whipsaws RSI stays more stable Fewer fake buy signals during consolidation ✅ 3. Better Trade Holding Keeps you in trends longer Avoids early exits caused by noise 6️⃣ How to Use Heikin Ashi with This Strategy On TradingView: Open your chart Click Candles Select Heikin Ashi Apply the strategy 📌 Important Tip EMAs & RSI will now be calculated using Heikin Ashi data This is ideal for trend-following, not scalping ranges 7️⃣ Best Settings & Recommendations ⏱ Timeframes 5m / 15m → Crypto & Forex intraday 1H / 4H → Swing trading Daily → Position trading 📈 Market Conditions Best in strong trends Avoid low-volatility ranges 🎯 Pro Tip Combine with: Higher-timeframe trend bias Session filter (London / New York) Volume confirmation 8️⃣ Final Advice from 🙏 The Blessed Trader Ph. “This strategy doesn’t predict — it confirms. Be patient. Wait for clean Heikin Ashi closes. Trade less, but trade better.”
Stratégie Pine Script®
par Blessed_Trader22
HA Trend Reclaim Daily Structure Pullback🔹 HA Trend Reclaim — Daily Structure Pullback System HA Trend Reclaim is a professional-grade trend continuation indicator designed to highlight high-probability LONG and SHORT setups using a combination of: Heikin Ashi candle structure EMA trend alignment (9 & 50 EMA) Daily High / Low market structure Pullback → momentum reclaim logic This indicator is built for traders who want clarity, discipline, and structure, not noise or over-signaling. It focuses on trading with the dominant trend, entering only after price pulls back and confirms strength via momentum reclaim. 🔑 What Makes This Different ✔ No counter-trend signals ✔ No breakout chasing ✔ Built-in structure awareness ✔ Clear visual entries & risk levels ✔ Works across stocks, crypto, and futures This script is ideal for traders who prefer fewer, higher-quality trades rather than constant signals. 2️⃣ HOW TO USE (FEATURED-FRIENDLY VERSION) 🟢 LONG Conditions A LONG signal appears when: EMA 9 is above EMA 50 Price is above EMA 50 Price pulls back into the EMA zone Price reclaims EMA 9 upward Heikin Ashi candle closes bullish (not a doji) 🔴 SHORT Conditions A SHORT signal appears when: EMA 9 is below EMA 50 Price is below EMA 50 Price pulls back into the EMA zone Price reclaims EMA 9 downward Heikin Ashi candle closes bearish (not a doji) 📦 Daily Structure Boxes The indicator highlights the daily high–low range: Green box → bullish daily bias Red box → bearish daily bias These boxes help traders avoid: Mid-range chop Late entries Trading against daily momentum 3️⃣ BEST SETTINGS (VERY IMPORTANT FOR USERS) Recommended Timeframes Stocks: 5m, 15m, 1H Crypto: 15m, 1H, 4H Futures: 5m, 15m Recommended Inputs Setting Value EMA Fast 9 EMA Slow 50 Swing Lookback 15 Runner RR 2.0 Heikin Ashi Enabled Show Daily Boxes Enabled Notes Higher timeframes = fewer, stronger signals Avoid low-liquidity instruments Best used during active sessions (London / NY)
Indicateur Pine Script®
par JCW48
Moving Average Ribbon - version 4There are many different strategies using Moving Averages such as the Guppy, Super Guppy, Madrid Ribbon and others. Some strategies use one type of calculation over the other. I am not advocating one strategy over another and this indicator is not a particular strategy. It provides up to 27 moving averages. You can choose between Simple, Exponential (default), ALMA, Hull, WMA, RMA and DEMA for the calculation method. You can choose which Moving Averages to show and not show. You can change the lengths of any of the Moving Averages. Some strategies I have seen uses different sources. You can set the source for each individual Moving Average. If you use this indicator more than once on the same chart, you can offset the two indicators if needed. The indicator has two methods for coloring the plots. The default is by direction and order. If going up and the faster MA is higher than the next slower MA, it is bullish. If going down and the faster MA is lower than the next slower MA, it is bearish. Otherwise, it is neutral. An alternate means looks at separation distance. A slower MA will inherit the color of the faster MA if the distance between the two is equal or greater than the previous candle. If standard colors are used, there is a Strong Bear, Weak Bear, Strong Bull and Weak Bull. If you choose to use Alternate colors, you have a Bullish and Bearish color. Defaults are simply set to how I have been using it. I also have it applied on multiple charts across multiple timeframes. It is not a recommendation or promise of best method. I am still experimenting with different layouts.
Indicateur Pine Script®
par gdad
Multi-Timeframe Volume Profile - Auto HVN WallsMulti-Timeframe Volume Profile - Auto HVN Walls Overview This indicator provides a highly flexible Volume Profile solution that operates across multiple timeframes (Session, Weekly, Monthly, Yearly). Unlike standard profiles, this tool features a unique "Auto HVN Wall" detection system. It automatically identifies meaningful High Volume Nodes (HVNs) within the profile structure and extends them forward as potential support and resistance zones, creating a dynamic map of market structure as it develops. Key Features Multi-Timeframe Support: Switch seamlessly between Session, Weekly, Monthly, and Yearly profiles. Auto HVN Walls (Structure Detection): The script analyzes the profile shape in real-time. When it detects significant clusters of volume (HVNs), it automatically draws extended lines ("walls"). These walls often act as magnets or support/resistance levels where price has previously found acceptance. Session Filtering: When in "Session" mode, you can define specific time windows (e.g., 0930-1615) to isolate Regular Trading Hours (RTH) volume, ignoring overnight data. Auto-Scaling Width (Monthly Mode): For Monthly profiles, the histogram width dynamically changes throughout the month. It starts wide at the beginning of the month to be visible and gradually narrows as the month progresses, keeping your chart clean. High Precision: Uses lower timeframe data (user-selectable) to build the profile, ensuring accuracy even on higher timeframe charts. Alerts: Built-in alert conditions for price crossing the developing POC, VAH, or VAL. How It Works Data Accumulation: The script fetches lower timeframe volume and price data (e.g., 5-minute data on a 1-hour chart) to construct a precise volume histogram. Wall Detection: It runs a smoothing algorithm over the volume profile. If a price level accumulates volume significantly higher than the average (controlled by the Volume Threshold Multiplier), it marks that level as a "Wall" and extends it. Value Area: Standard Value Area High (VAH), Value Area Low (VAL), and Point of Control (POC) are calculated and displayed for the selected period. Settings Guide Profile Period: Choose between Session, Weekly, Monthly, or Yearly. Session Time: (Only active in "Session" mode) Define the start and end times for the profile (e.g., 0930-1615). Calculation Precision: Determines the lower timeframe used to build the profile. Lower is more precise but may load slower. The Walls: Smoothing Factor: How much to smooth the volume data before finding walls. Higher = fewer, more significant walls. Volume Threshold: How much volume is needed to trigger a wall. Extend Walls: If checked, walls extend infinitely to the right. Auto-Scale Width: (Monthly Only) dynamically adjusts the profile width based on the day of the month. Use Case This tool is ideal for auction market theorists and volume profile traders who want to visualize where value is building in real-time and identify "sticky" price levels (Walls) where the market is likely to rotate or consolidate. Disclaimer This script and the information presented here are for educational and informational purposes only. They do not constitute financial advice, investment recommendations, or trading signals. Trading in financial markets involves a significant risk of loss and is not suitable for all investors. Past performance of any trading system or methodology is not necessarily indicative of future results. Use this tool at your own discretion and risk.
Indicateur Pine Script®
par tantankatrading
Sawaes StrategyHere’s a **clear TradingView-style description** you can use directly in the indicator’s **Description** field or when sharing it publicly. --- ## 📈 Sawaes Strategy – Buy & Sell Signal (SuperTrend-Based) ### 🔹 Overview **Sawaes Strategy** is a trend-following indicator based on a **custom SuperTrend calculation** using **ATR (Average True Range)**. It is designed to identify **trend direction**, **dynamic support/resistance**, and provide **clear buy and sell signals** when price confirms a trend change. The indicator plots a colored trailing line on the chart and generates visual arrows for entries, making it suitable for **intraday, swing, and positional trading**. --- ### 🔹 How It Works 1. **ATR Volatility Measurement** * Uses ATR to measure market volatility. * The ATR value is multiplied by a user-defined **Factor** to adapt to different markets and timeframes. 2. **Dynamic Trend Lines** * A **SuperTrend trailing stop line** is calculated above or below price. * The line moves only in the direction of the current trend, preventing whipsaws. 3. **Trend Direction** * 🟢 **Green line** → Uptrend (Bullish) * 🔴 **Red line** → Downtrend (Bearish) 4. **Trend Switching** * Trend flips when price decisively crosses the trailing stop line. * Entry arrows appear only on confirmed trend changes. --- ### 🔹 Buy & Sell Signals #### 🟢 Buy Signal * Price crosses **above** the SuperTrend line * Price closes **above** the trailing stop * Trend changes from **bearish to bullish** * Displayed as: * Green **triangle up** * Green **arrow up** on trend reversal #### 🔴 Sell Signal * Price crosses **below** the SuperTrend line * Price closes **below** the trailing stop * Trend changes from **bullish to bearish** * Displayed as: * Red **triangle down** * Red **arrow down** on trend reversal --- ### 🔹 Inputs * **Factor** Controls sensitivity. * Higher value → fewer signals, stronger trends * Lower value → more signals, faster reactions * **ATR Period** Defines how volatility is calculated. --- ### 🔹 Best Use Cases ✔ Trending markets ✔ Index, Forex, Crypto, Stocks ✔ Works on all timeframes ✔ Can be combined with: * Volume confirmation * RSI / MACD * Support & Resistance --- ### 🔹 Risk Management Tips * Use the SuperTrend line as a **dynamic stop-loss** * Trail stops along the colored trend line * Avoid choppy or sideways markets * Confirm higher-timeframe trend for better accuracy --- ### 🔹 Alerts The indicator includes: * 📢 Buy alert * 📢 Sell alert These can be used for automation or mobile notifications. --- If you want, I can: * Rewrite this as a **short public TradingView description** * Add **disclaimer text** * Convert it into a **strategy with backtesting** * Optimize parameters for **crypto / forex / indices** Just tell me 👍
Indicateur Pine Script®
par Sawa_Trading
Broadening Formation Structure Review ToolThis script provides an educational, checklist-based framework for studying Broadening Formations together with basic Strat-style reversal behavior and higher-timeframe direction. It is designed to show multiple structural conditions in one place so users can observe how they interact. It does not execute trades, generate signals, or provide financial advice. What makes this script original is the integration of four components into a single logical framework: • dynamic tracking of Broadening Formation high/low levels • proximity evaluation relative to those levels • classification of simple bar reversal behavior • higher-timeframe open–close continuity checks Instead of using these concepts as separate tools, the script combines them into a single checklist so users can see when multiple conditions occur at the same time. Broadening Formation levels may be user-defined or automatically derived using: • unlimited dynamic expansion • range-limited dynamic expansion • swing-pivot detection • manual input mode Users may also optionally lock levels once a structure is identified. Proximity to BF levels can be measured in several ways, including percentage, ticks, points, dollars, ATR multiples, or expected-move multiples. The script can also detect when price takes out BF highs or lows. The script classifies basic Strat-style price behavior, including: • two-up / two-down moves • outside bars • failed 2U/2D reversals • 2D→2U and 2U→2D reversals A selectable higher timeframe (such as 60, 240, D, W, or M) is used to evaluate direction by comparing the higher-timeframe open and close. The on-chart table summarizes: • current BF High and BF Low levels • proximity status relative to those levels • whether BF highs or lows have been taken out • reversal classification results • higher-timeframe direction • theoretical risk distance and 2R/3R projections Optional alerts can notify when three-condition or four-condition checklist alignment occurs, based only on the logical rules visible in the script. Optional chart lines for BF levels may also be displayed. Transparency and behavior notes • swing pivots repaint until confirmed • higher-timeframe direction is only final at bar close • dynamically derived BF levels may update as price forms new extremes This script is intended purely for market-structure study and education. It does not guarantee performance, predict outcomes, or recommend trades.
Indicateur Pine Script®
par hardwaybets
Swing Failure Signals [AlgoAlpha]🟠 OVERVIEW This script detects swing failure patterns by tracking how price interacts with recent swing highs and lows, then confirming those sweeps with a change in candle behavior. The goal is to highlight areas where price briefly breaks a key level, fails to continue, and then shifts direction. These events often occur around liquidity runs, where stops are triggered before price reverses. The script draws levels, colors bars, and prints clear markers to help visualize where these failures occur and when they are confirmed. 🟠 CONCEPTS The logic starts with pivot-based swing detection. Recent swing highs and lows are stored and monitored. When price trades beyond one of these levels within a defined historical window, it is treated as a sweep. A sweep alone is not enough. The script then waits for a Change in State of Delivery (CISD), which is defined by a shift in candle structure that shows follow-through in the opposite direction. A tolerance filter measures how far price traveled beyond the level relative to the reaction that followed. If the reaction is strong enough and happens within a limited number of bars, the sweep is validated as a swing failure. In short: the swing defines the reference, the sweep shows intent, and the CISD confirms acceptance or rejection. 🟠 FEATURES Sweep detection with a maximum lookback to avoid outdated levels CISD confirmation using candle structure and price expansion Alert conditions for bullish and bearish swing failures 🟠 USAGE Setup : Add the script to your chart. It works on any market and timeframe. Lower timeframes highlight intraday liquidity runs, while higher timeframes show structural failures. Start with the default inputs before adjusting. Read the chart : A bullish swing failure occurs when price sweeps a prior low, then reverses and confirms with a bullish CISD. A bearish swing failure is the opposite, sweeping a prior high and confirming with a bearish CISD. Dashed lines mark the swept swing. Solid lines mark the CISD level. Bars are colored while the SFP state is active. Settings that matter : Increasing Pivot Detection Length finds more significant swings but fewer signals. Reducing Max Pivot Point Edge limits how far back sweeps are allowed, keeping signals more current. The Patience setting controls how many bars are allowed for confirmation after a sweep. The Trend Noise Filter raises or lowers how strong the reaction must be to qualify as a valid failure.
Indicateur Pine Script®
par AlgoAlpha
10
TradeCraftly - Previous OHLC Levels📌 TradeCraftly – Previous OHLC Levels TradeCraftly OHLC plots the most important higher-timeframe price levels directly on your chart, helping you identify key support, resistance, and reference zones with clarity. 🔹 What this indicator shows Previous Day OHLC (High, Low, Open, Close) Previous Week OHLC Previous Month OHLC Today’s Open (no historical clutter) All levels are drawn as clean horizontal rays and extend only into the current session, keeping the chart focused and readable. 🔹 Key Features Individual enable / disable controls for Day, Week, and Month levels No historical clutter – only the most relevant levels are shown Labels aligned to today’s first candle for quick level identification Custom line width, color, and style (solid / dashed / dotted) Works seamlessly on all intraday and higher timeframes 🔹 Why use Previous OHLC levels? Previous period OHLC levels are widely used by: Intraday traders Swing traders Index & futures traders They often act as: Strong support & resistance Liquidity zones Breakout / rejection levels 🔹 Best Use Cases Market open bias using Today’s Open Intraday trades around PDH / PDL Weekly range reactions near PWH / PWL Higher-timeframe context using Monthly levels ⚠️ Disclaimer This indicator is for educational purposes only and does not provide trading signals or financial advice. Always manage risk and confirm with your own analysis.
Indicateur Pine Script®
par amolsmagar
Fair Value Gaps w Signals fair value gaps for resistance and support. It is important to understand ranges with this. An open bearish fair value gaps can indicate a bearish range. A bullish fair value gaps in premium can indicate retracement into the bearish range. A fair value gaps on a high time frame in discount of the range can be a indicator to go long. one can play the fair value gaps in discount or a range back into it for longs. negation of the fair value gaps candle bearish or bullish is stop loss. One would want to see a small time frame turn around story within the fair value gaps you are trading. FVG are support and resistance until the market is balanced. A bearish fair value gaps untouched can indicate the end of a range. The candle before the 1st bullsih fair value gaps could be the beginning of the range. all time frames
Indicateur Pine Script®
par soulvibeslive
3
Candle Statistics | by beidou_123Script Description Candle Statistics is a quantitative market analysis indicator that provides a structured statistical overview of recent price behavior using candlestick classification. The script analyzes historical candles over four user-defined lookback periods and classifies each candle into one of three categories: Bullish candles (close > open) Bearish candles (close < open) Doji candles , defined as candles whose real body is less than or equal to 10% of the total candle range Key Features Fully customizable lookback periods Users can define four independent candle windows (e.g., 15, 60, 240, 480 bars). Standardized Doji definition A Doji is identified when the candle body is small relative to total price range, ensuring consistency across instruments and timeframes. Directional dominance calculation For each lookback period, the script computes the Bullish Percentage, defined as: Bullish % = Bullish Candles ÷ (Bullish + Bearish Candles) Doji candles are intentionally excluded from this calculation to avoid diluting directional bias. Visual dominance highlighting If Bullish % > 50%, the value is displayed using a user-defined bullish dominance color If Bullish % ≤ 50%, the value is displayed using a user-defined bearish dominance color On-chart statistics table All results are presented in a compact, non-intrusive table displayed directly on the main chart. Table position is fully configurable. Intended Use This indicator is designed for: Market structure analysis Trend bias evaluation Volatility and indecision studies Systematic filtering in discretionary or rule-based trading systems It is not a signal generator, but a statistical context tool that helps traders assess whether recent price action is dominated by bullish pressure, bearish pressure, or indecision. Disclaimer This indicator is provided for educational and analytical purposes only and does not constitute financial or investment advice.
Indicateur Pine Script®
par beidou_123
CVD Flow Labels for Sessions Ranges [AMT Edition]CVD Flow Labels for Session Ranges Description: This script provides a session-aware Cumulative Volume Delta (CVD) analysis designed to enhance the “Session Ranges ” framework by combining price extremes with detailed volume flow dynamics. Unlike generic trend or scalping indicators, this tool focuses on identifying aggressive buying and selling pressure, distinguishing between absorption (failed auctions where aggressive flows are rejected) and acceptance (confirmed continuation of flows). How it works: CVD Calculation: The script calculates delta for each bar using a choice of Total, Periodic, or EMA-based cumulative methods. Delta represents the net difference between estimated buying and selling volume per bar. Normalization: By normalizing delta relative to recent volatility, it highlights extreme flows that are statistically significant, making large shifts in market sentiment easier to spot. Session-Specific Analysis: The indicator separates Asia, London, and New York sessions to allow context-sensitive interpretation of price and volume interactions. Each session’s extremes are monitored, and flow labels are plotted relative to these extremes. Flow Labels: Bullish and bearish absorption (“ABS”) and acceptance (“ACC WEAK/STRONG”) labels provide immediate visual cues about whether aggressive flows are being absorbed or accepted at key price levels. Alerts: Configurable alerts trigger when absorption or acceptance occurs, supporting active trading or strategy automation. Originality & Usefulness: This script is original because it integrates volume-based auction theory with session-specific market structure, rather than simply showing trend or scalping signals. By combining CVD dynamics with session extreme levels from the “Session Ranges ” script, traders can: Identify where price is likely to be accepted or rejected. Confirm aggressive buying or selling flows before entering trades. Time entries near session extremes with higher probability setups. How to use: Apply the “Session Ranges ” to see session highs, lows, and interaction lines. Use this CVD Flow Labels script to visualize absorption and acceptance at these session levels. Enter trades based on alignment of session extremes and flow signals: Absorption at a session extreme may indicate a potential reversal. Acceptance suggests continuation in the direction of the flow. Alerts can help manage trades without constant screen monitoring. This tool is designed to give traders a structured, session-based view of market auctions, providing actionable insights that go beyond typical trend-following or scalping methods. It emphasizes flow analysis and statistical extremes, enabling traders to make more informed decisions grounded in market microstructure.
Indicateur Pine Script®
par samb817
3
SMC Market Structure (HH/HL/LH/LL + BOS/CHoCH/MSS)SMC Market Structure (HH/HL/LH/LL + BOS/CHoCH/MSS) is a clean price-action / Smart Money Concepts market structure tool designed to automatically identify and label key structural events on the chart: Swing structure points: HH, HL, LH, LL Continuation confirmations: BOS (Break of Structure) Early reversal warnings: CHoCH (Change of Character) Stronger reversal signals: MSS (Market Structure Shift) using a displacement filter The script is built to remain visually tidy: it draws simple horizontal structure lines at the broken swing level and prints small abbreviations (BOS / CHoCH / MSS) directly on the chart without cluttering candles or adding heavy panels. What the Indicator Detects 1) Swing Points (HH / HL / LH / LL) Swings are detected using confirmed pivots (left/right “Swing length” bars). HH (Higher High): a swing high above the previous swing high LH (Lower High): a swing high below the previous swing high HL (Higher Low): a swing low above the previous swing low LL (Lower Low): a swing low below the previous swing low These labels help define the market’s active structure: Bullish structure: HH + HL sequence Bearish structure: LL + LH sequence Range / consolidation: mixed swing progression 2) BOS (Break of Structure) – Trend Continuation A BOS prints when price breaks the most recent swing level in the direction of the current structure: In a bullish market state → break above the most recent swing high In a bearish market state → break below the most recent swing low This is typically treated as confirmation that the existing trend is continuing. 3) CHoCH (Change of Character) – Early Reversal Signal A CHoCH prints on the first break against the current structure: In a bullish market state → break below the most recent swing low In a bearish market state → break above the most recent swing high CHoCH is intended as an early warning that the market may be transitioning into a new directional bias. 4) MSS (Market Structure Shift) – Stronger Reversal via Displacement MSS is treated as a “strong CHoCH” and requires a decisive, displacement-style candle at the break. To qualify as MSS, the script requires: A break against structure with a CLOSE break, and A displacement candle where: Candle body > ATR × Displacement Multiplier This helps filter out shallow wicks or minor liquidity grabs and highlights shifts that show stronger participation and momentum. How the Indicator Draws on the Chart When a BOS / CHoCH / MSS occurs: A horizontal line is drawn from the swing point to the break bar at the broken level. A small abbreviation label (BOS / CHoCH / MSS) is placed either: In the middle of the line segment, or On the break bar (selectable) Swing labels (HH/HL/LH/LL) are optional and can be disabled for a cleaner “event-only” layout. Inputs & Settings Swing Length (Pivot Left/Right) Controls how sensitive the swing detection is. Lower values (3–5): more structure points, more signals Higher values (8–14): fewer, cleaner swings (better for higher timeframes) Break Confirmation (Wick vs Close) Wick: break triggers when the candle’s wick crosses the swing level Close: break triggers only when the candle closes beyond the swing level Many SMC traders prefer Wick for detecting liquidity runs and early breaks, while others prefer Close to reduce false signals. MSS Displacement Filter ATR Length: ATR calculation period Displacement Multiplier: Minimum body size = ATR × multiplier Higher multiplier = fewer MSS signals, but stronger quality threshold. Display Toggles Show/Hide Swing Labels (HH/HL/LH/LL) Show/Hide BOS, CHoCH, MSS Optional EQH/EQL labeling (equal highs/lows) Visual Controls Bullish / bearish structure colors Line width / style Text offset (in ticks) to keep labels neat above/below level Maximum structure objects to keep on screen (prevents object-limit issues) Recommended Usage Trend Following Use HH/HL or LL/LH progression to define the trend. Wait for BOS to confirm continuation. Use BOS levels as: Bias confirmation Potential retest zones Risk reference for stop placement Reversal / Shift Detection Identify prevailing structure (bullish or bearish). Watch for CHoCH as the first sign of a possible reversal. Treat MSS as a stronger “shift” event (displacement + close break), often suitable for: Changing directional bias Switching from pullback trading to reversal continuation setups Multi-Timeframe Workflow (Common SMC Method) Higher timeframe (HTF): use swings and BOS to define macro bias Lower timeframe (LTF): use CHoCH/MSS to time entries and manage risk Confirm entries with your preferred tools (order blocks, FVGs, liquidity pools, session timing, etc.) Notes & Limitations This script uses confirmed pivots, so swing labels appear only after the swing is fully formed (after Swing length bars). This avoids repainting swing points. BOS/CHoCH/MSS events are derived from the most recent confirmed swing levels. MSS requires a close break and displacement threshold even if “Wick” breaks are enabled for other events (by design, to keep MSS strict). Best Settings by Timeframe (General Guide) Scalping (1–5m): Swing length 3–5, Wick breaks, MSS multiplier 1.2–1.8 Intraday (15m–1h): Swing length 5–8, Wick or Close, MSS multiplier 1.5–2.0 Swing trading (4h–1D): Swing length 8–14, Close breaks, MSS multiplier 1.8–2.5
Indicateur Pine Script®
par CptRedd
Smart Candlestick Pattern Filter [MarkitTick]💡 This Script is a sophisticated technical analysis tool designed to identify, grade, and display over 40 distinct candlestick formations based on a proprietary strength and context filtering system. Unlike standard pattern finders that often clutter charts with conflicting signals, this script utilizes a hierarchy logic to display only the most significant pattern detected on any given candle, ensuring chart clarity and actionable data. ● Originality and Utility The primary utility of this script lies in its filtering engine. Standard indicators often flag every minor Doji or Spinning Top, creating noise. This indicator categorizes patterns into five distinct levels of strength, ranging from simple indecision to very strong reversal or continuation signals. Furthermore, it incorporates a Trend Context filter, which checks the relationship between price and a Simple Moving Average (SMA). This ensures that reversal patterns (like Hammers) are prioritized during downtrends, while continuation patterns are highlighted during established moves, reducing false positives. ● Methodology The indicator evaluates price action using specific ratios between the Open, High, Low, and Close, alongside the body size relative to the total range. It assigns a strength score to each detected pattern. • Pattern Strength Grading Strength 1 (Indecision): Includes patterns like Doji, Spinning Tops, Dragonfly, and Gravestone Dojis. These signal a pause in momentum. Strength 2 (Weak): Includes patterns like Hanging Man, Inverted Hammer, Belt Holds, and In-Neck lines. These suggest potential movement but often require confirmation. Strength 3 (Moderate): Includes classic reversals like Hammers, Shooting Stars, Haramis, Dark Cloud Cover, and Piercing Lines. Strength 4 (Strong): Includes major signals like Engulfing patterns, Morning/Evening Stars, and Marubozu candles. Strength 5 (Very Strong): Reserved for rare, high-probability multi-candle formations like Three White Soldiers, Three Black Crows, Rising/Falling Three Methods, and Breakaway gaps. The script calculates all potential patterns for the current bar and then compares their strength scores. Only the pattern with the highest strength is displayed. If the Show Trend Context option is enabled, the script further validates the pattern against the current market direction (determined by the SMA and slope) before plotting. ● How to Use Traders can use this tool to identify potential entry and exit points based on the strength of the signal. • Visual Signals Patterns are labeled directly on the chart: Green Labels/Text: Indicate Bullish patterns. Red Labels/Text: Indicate Bearish patterns. Gray/White Labels: Indicate Indecision or Weak patterns. Hovering over any label provides the full name of the pattern and its strength rating (e.g., "Bullish Engulfing - Strength: Strong"). • Trading Logic High Strength Signals (Levels 4-5): These can be used as primary triggers for trend reversals or strong continuations. Moderate Signals (Level 3): Useful for adding confluence to existing analysis or anticipating a setup. Indecision (Level 1): Often useful for taking profits or tightening stop-losses, as they indicate the current trend may be stalling. ● Settings Show Only Strong Patterns: When enabled, filters out Strength 1, 2, and 3, showing only the most significant signals (Strength >= 4). Max Patterns to Display: Limits the number of historical labels to prevent chart clutter. Max Candles to Check Engulfing: Adjusts how far back the script looks to validate the size of an engulfing candle. Trend Detection Period: Sets the length of the SMA used to determine the background trend context. Show Only Trend-Appropriate Patterns: If checked, bullish reversals are only shown in downtrends, and bearish reversals in uptrends. ● Disclaimer All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. I expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion.
Indicateur Pine Script®
par MarkitTick
8
Classic Chartism-Market Structure- Support.ResistanceClassic Chartism – Market Structure + Support & Resistance This indicator is designed for traditional chart-based technical analysis, relying exclusively on price action and market structure, without the use of oscillators or lagging indicators. The script automatically detects significant swing highs and swing lows using confirmed pivots and classifies price structure according to classic market structure notation: HH (Higher High) HL (Higher Low) LH (Lower High) LL (Lower Low) Based on these swings, the indicator plots horizontal Support & Resistance (SR) levels, representing historically significant areas of supply and demand. These levels remain active until invalidated by price, providing a clear and objective market context. The indicator does not repaint once a swing is confirmed, making it suitable for real-time analysis and discretionary trading decisions. It performs well across cryptocurrencies, futures, indices, and equities, and is particularly useful for trend identification, pullback entries, and structure-based risk management.
Indicateur Pine Script®
par Reawulf