Commencez

Candlestick analysis

ADR SQUEEZEADR SQUEEZE – Volatility Compression & Expansion ADR SQUEEZE is a volatility-based indicator that uses Average Daily Range (ADR) to identify price compression (squeeze) and range expansion phases. It compares the daily % price change with ADR-derived thresholds to classify market conditions. Marker Meanings (Plotted on Zero Line) Pink Dot – Tight Squeeze Price movement is significantly smaller than normal ADR. Indicates strong volatility contraction and energy buildup. Yellow Dot – Mild Squeeze Price movement is increasing but still below full ADR. Often appears just before expansion. Green Cross – Expansion Up Price change exceeds ADR to the upside. Signals strong bullish range expansion. Red Cross – Expansion Down Price change exceeds ADR to the downside. Signals strong bearish range expansion. How to Use Watch for extended pink dots as early compression zones Yellow dots often mark transition from squeeze to move Green / Red crosses confirm directional expansion Best used with price structure, breakouts, and trend context
Indicateur Pine Script®
par sumitpandey617
Proactive Execution MachineProactive Execution Machine: Multi-State Momentum Engine Overview The Proactive Execution Machine is a comprehensive trading workspace designed to filter market noise and highlight high-probability execution windows. It combines Dynamic Supply/Demand Zones, Manual Level Proximity, and a proprietary Dual-Candle Momentum Scoring system to categorize the market into specific "States" in real-time. Instead of a simple arrow, this script provides a System Status dashboard that tells you exactly what phase the market is in—whether it's "Level Absorption," a "Demand Vortex," or a "Tired Trend. "Core Components 1. The Momentum Gauge (Bottom Left) This table provides a deep-dive into order flow by scoring the last two candles based on: Close Location: Where price closed relative to its range (Upper, Middle, Lower). Body-to-Wick Ratio: Measuring the "effort vs. result" of the move. Range Relativity: Whether the current bar is an "Inside" or "Outside" bar relative to the previous candle. Slope (Linear Regression): A real-time trendline of momentum strength to see if conviction is accelerating or decelerating. 2. Dynamic State Engine The script automatically identifies and colors the chart into three primary zones: Supply Zone (Red): The upper 30% of the recent price discovery range. Demand Zone (Green): The lower 30% of the recent price discovery range. Proximity Zones: When price nears your Manual Levels (PDH, PDL, NY Open, etc.), the engine switches priority to monitor for "Breakouts" or "Level Attacks." 3. System Status (Bottom Right)The dynamic HUD changes size and color based on conviction levels. It will notify you of specific market conditions: Supply/Demand Overrun: When momentum is so strong it is smashing through reversal zones. Level Absorption/Stalling: When price reaches a key level but momentum has "flattened," suggesting a potential reversal or high-volume churn. Buy/Sell Now: High-conviction signals triggered only when Location (Zone) and Momentum (Score) align. How to Trade with the "Machine" For Trend Followers: Look for the status "TREND (ACTIVE)" combined with a Momentum Score of $\pm 4$ or higher. For Reversion Traders: Watch for "WATCH LONGS/SHORTS" when price enters a Supply or Demand zone. Wait for the status to flip to "BUY/SELL NOW" as momentum begins to shift back toward the mean. For Level Traders: Input your daily levels (VAH, VAL, POC) in the settings. The machine will automatically prioritize these levels, changing status to "AT LEVEL" the moment price enters your specified proximity. Key Settings Manual Levels: Input up to 5 custom price levels for the proximity engine. Proximity Sensitivity: Adjust how close price must be to a level (in points/pips) to trigger an "At Level" state. Aggression (1-5): Tuning the pivot detection. Lower numbers respond faster to micro-structure; higher numbers focus on major swing points. Visual Coding Candle bodies are colored to assist with single candle pattern detection: Lime/Pink Bar Highlights: The script uses a custom color engine to highlight "Shaved" (Marubozu) bars. Lime indicates aggressive bullish conviction, while Pink (Fuchsia) highlights aggressive bearish conviction. Green indicates bull engulfing candle Red indicates bear engulfing candle Orange is an outside bar Yellow an inside bar Gray a Doji bar Black all other bars Dynamic Zones: The chart features two primary background areas: Red Zone (Top): The Supply Zone, identifying where sellers historically reclaim control. Green Zone (Bottom): The Demand Zone, identifying where buyers historically step in. System Status HUD (Bottom Right): This is the "brain" of the machine. The text size is adjusted to attract the trader's attention when the slope of the momentum increases above 5 (bullish expansion) or greater than - 5 (Bearish expansion). The system status changes color based on the market state too: HUD Coloring: Aqua: Active Bullish Trend. Gray: Bull trend tired. Orange: Active Bearish Trend. Gray: Bear trend tired. Red: For sell now. Green: For buy now. Lime: Bull price level under attack. Marron: Bear price level under attack. Gray: Price level absorption. Yellow: Price at level and stalling. Maroon: An "Overrun" or "Vortex" where price is smashing through supply/demand with extreme momentum. The text size serves as a "Volatility Alarm." * When the text is Small, the market is in a "sideways" or "absorbing" state. You should be cautious about entering new trend trades. When the text is Large, the Machine has detected that "Aggressive" participants have entered the order flow. This is your cue that a "Level Attack" or a "Trend Breakout" is currently in progress. The 1-Minute Tactical Setup Guide: Proactive Execution Machine Operating on the 1-minute (1m) timeframe requires a balance between speed and noise filtration. Because the Proactive Execution Machine uses a "State Engine" logic, it is uniquely suited for the high-velocity environment of the NY Open. I follow these three tactical steps to optimize the chart for the 1m timeframe: Step 1: Calibrate the "Proximity Sensitivity" On a 1m chart, a "Level" isn't a single price—it's a zone. Adjustment: In the script settings, set your Proximity Sensitivity to a value that represents the average "noise" of your instrument. For ES (S&P 500 Futures): 1.5 to 2.5 points. For NQ (Nasdaq Futures): 5 to 10 points. For Forex (EURUSD): 1 to 2 pips. The Goal: You want the "AT LEVEL" status to trigger just as price is "sniffing" the level, giving you time to prepare your order before the touch. Step 2: Watch the "History" Column in the Momentum Gauge The bottom-left table is your most important tool for the 1m chart. It shows you the momentum of the last three bars ($T-0$, $T-1$, $T-2$). Momentum Sequence: Look for a "Sequence of Three." If you see $T-2$ (Neutral), $T-1$ (Long), and $T-0$ (STR Long), you have a momentum explosion. The Trap: If you see STR LONG followed immediately by a NEUTRAL bar while in a Supply Zone, the "Machine" will shift to "SUPPLY STALLING." This is your signal to tighten your trailing stop or take profit—it means the bulls are hitting a wall of sell orders. Step 3: The "Level Attack" Execution The script features a unique state called "LEVEL ATTACK." This is designed specifically for breakout/breakdown traders. The Setup: Price is approaching a Manual Level (like the NY Open or PDH). The Signal: If the status changes to "LEVEL ATTACK (BULL)," it means the momentum score is high ($>3$) and the slope is positive while within the proximity of the level. The Action: This is a "Proactive" entry. Instead of waiting for the candle to close above the level, you are entering as the "Machine" detects institutional pressure "attacking" the level. Daily Routine for the "Machine" 1) 09:25 AM: Input your 5 manual levels (PDH, PDL, NY Open, VAH, VAL). 2) 09:30 AM: Wait for the first 5 minutes of volatility to settle. 3) The Window: Look for the System Status to move from "IDLE" to a colored state. 4) The Trigger: Never take a signal if the Momentum Gauge is in the "Neutral" (Yellow) zone. Only execute when the gauge shows LONG/SHORT or STR LONG/STR SHORT.
Indicateur Pine Script®
par immediatePerso44773
3
Dynamic Support Resistance Zones====================================================================== TRADINGVIEW PUBLICATION - DYNAMIC SUPPORT RESISTANCE ZONES ====================================================================== TITLE: Dynamic Support Resistance Zones SHORT TITLE: SR Zones -------------------------------------------------------------------------------- DESCRIPTION (Copy below for TradingView publication) -------------------------------------------------------------------------------- The Dynamic Support Resistance Zones indicator identifies key price levels where potential reversals may occur by analyzing candlestick behavior and volume dynamics together. ▶ CONCEPT AND METHODOLOGY This indicator detects support and resistance levels through a specific combination of three market conditions occurring simultaneously: 1. Candlestick Body Expansion: The current candle's body (distance between open and close) must be larger than the previous candle's body. This signals increased price commitment from market participants. 2. Direction Reversal: The current candle must close in the opposite direction of the previous candle. A bullish candle following a bearish candle suggests potential support formation, while a bearish candle following a bullish candle suggests potential resistance formation. 3. Volume Contraction: The current candle must have lower volume than the previous candle. This condition filters out high-volume breakout moves and focuses on exhaustion patterns where price reverses on decreasing participation. When all three conditions align, the indicator marks the opening price of the previous candle as a significant level. ▶ HOW LEVELS ARE CLASSIFIED Support Zones (Green Lines): Form when a bullish reversal candle appears with an expanded body on declining volume. These represent areas where buying pressure overcame selling pressure. Resistance Zones (Red Lines): Form when a bearish reversal candle appears with an expanded body on declining volume. These represent areas where selling pressure overcame buying pressure. ▶ DYNAMIC LEVEL MANAGEMENT The indicator continuously monitors each level and updates its status: - Active Levels (Solid Lines): Levels that have not been broken by a closing price. These extend forward automatically as new bars form. - Broken Levels (Dashed Lines): When price closes beyond a level, it converts to a dashed line. These broken levels remain visible for potential retest scenarios. - Level Removal: Broken support levels are removed if price closes back above them. Broken resistance levels are removed if price closes back below them. This keeps the chart clean and focused on relevant levels. ▶ TRADING APPLICATIONS Reversal Trading: Look for price approaching active support or resistance levels for potential bounce trades. Breakout Confirmation: When a solid level converts to dashed, it confirms a breakout. The dashed level then becomes a potential retest zone. Trend Analysis: Multiple support levels stacking below price suggests bullish structure. Multiple resistance levels above price suggests bearish structure. Risk Management: Active levels provide logical areas for stop-loss placement just beyond the identified zones. ▶ WHY THIS COMBINATION WORKS The three-filter approach (body expansion + direction change + volume decline) identifies exhaustion reversals rather than continuation patterns. Large body candles show conviction, direction change shows momentum shift, and lower volume suggests the prior move is losing steam rather than breaking out with strength. ▶ SETTINGS This indicator uses fixed detection logic with no adjustable parameters to maintain consistency. The colors are preset: green for support zones and red for resistance zones. ▶ BEST PRACTICES - Works on all timeframes but higher timeframes typically produce more reliable levels - Combine with trend analysis for directional bias - Not all levels will hold; use proper risk management - More effective in ranging or mean-reverting conditions than strong trending markets -------------------------------------------------------------------------------- TAGS (for TradingView) -------------------------------------------------------------------------------- support, resistance, reversal, volume, candlestick, levels, zones, price-action -------------------------------------------------------------------------------- CATEGORY -------------------------------------------------------------------------------- Support and Resistance ======================================================================
Indicateur Pine Script®
par A1TradingHub
MTF Candle Body Break WITH 20SMAMTF Candle Body Break WITH 20SMA: Complete Guide This indicator is a professional-grade market environment analysis tool designed to synchronize "Market Structure" and "Momentum" across multiple timeframes (MTF). 1. Core Logic: Candle Body Break Unlike traditional high/low breakouts that include wicks, this tool focuses exclusively on "Body Breaks" (Closing prices). Logical Basis: Wicks often represent temporary noise. A closing price break signifies a genuine shift in market consensus. Visualization: * Blue Lines: Bullish Structure. Red Lines: Bearish Structure. Gray/Black Lines: Historical breakout levels that often act as future Support or Resistance (S/R Flip). 2. Triple 20SMA System The indicator automatically plots three generations of 20-period SMAs relative to your current chart. Short-term (Black): 15-Min 20SMA (On a 1H chart). This acts as the "immediate support" for a strong trend. Mid-term (Blue): Current TF 20SMA. The backbone of the trend. Long-term (Red): Higher TF 20SMA. The major trend direction. 3. The Dashboard System (Three Components) The right side of the screen features a three-part visual system to confirm trend alignment: ① Top-Right Panel: Long-Term Signal Compares Daily (1D) and 4-Hour (4H) structure. Blue: Both are bullish. Red: Both are bearish. ② Middle-Right Bar: Momentum Signal (The "Final Filter") This vertical bar represents the SMA 10/20 Sync. Blue: The SMA 10 is above the SMA 20 on the 1-Hour chart. This indicates that short-term momentum is accelerating upward. Red: The SMA 10 is below the SMA 20. This indicates downward acceleration. Gray: No clear momentum (ranging or indecisive). ③ Bottom-Right Panel: Short-Term Signal Compares 1-Hour (1H) and 15-Minute (15M) structure. Blue: Both are bullish. Red: Both are bearish. 4. Entry Signal: The "●" (Dot) The "●" signal is the "Perfect Alignment" trigger. It appears when: Long-term (Daily/4H) is aligned. Short-term (1H/15M) is aligned. Momentum (Middle Bar) is aligned. When all these turn the same color, the "●" appears, signaling a high-probability trade. 日本語解説：完全版 このインジケーターは、**「相場の構造（実体ブレイク）」と「勢い（移動平均線の同期）」**を全時間軸で一致させ、高勝率なポイントを特定する環境認識ツールです。 1. 核心：実体ブレイク（Body Break） ヒゲではなく、**「終値（実体）」**で高値・安値を更新した時のみをトレンド転換と見なします。 メリット: 突発的なヒゲによるダマシを排除し、真の構造変化を捉えます。 表示: 青ライン（上昇）、赤ライン（下落）。過去のラインはグレー（サポレジ転換の目安）として残ります。 2. 3本の20SMA チャートの時間足に合わせて、自動で最適な3本のSMAを描画します。 短期（黒）: 15分足20MA（1時間足チャート時）。今の勢いを表し、押し目買いの目印になります。 中期（青）: 表示中の時間足の20MA。 長期（赤）: 上位足の20MA。 3. 3つのダッシュボード（信号機） 右側に表示される3つのパーツが、トレードの「Go/No-Go」を判定します。 ① 右上パネル：長期構造シグナル 日足と4時間足の構造を比較します。ここが「青」なら、大きな流れは上向きです。 ② 右中央のバー：モーメンタム・シグナル（真ん中のテーブル） 1時間足のSMA10とSMA20の同期を表します。 青: SMA10 ＞ SMA20（上昇加速中） 赤: SMA10 ＜ SMA20（下落加速中） 役割: 構造が良くても、勢いが死んでいる（レンジ）時はエントリーを避けるための「最終フィルター」です。 ③ 右下パネル：短期構造シグナル 1時間足と15分足の構造を比較します。ここが「青」に変わる瞬間が、エントリーの準備段階です。 4. エントリーサイン「●」 「長期・中期（真ん中のバー）・短期」すべての色が揃った瞬間にチャートに「●」が出現します。 すべての時間軸の投資家が同じ方向を向いた「完璧な同調」を示しており、最も期待値の高いエントリーポイントとなります。
Indicateur Pine Script®
par hmp5below
Quantum Flow [JOAT]Quantum Flow Nexus - Advanced Multi-Dimensional Flow Analysis Overview Quantum Flow Nexus is an open-source overlay indicator that combines custom EMA-based flow calculations with order flow analysis, multi-timeframe correlation, and liquidity zone detection. It provides traders with a structured framework for analyzing market momentum and identifying potential entry points based on multiple confirming factors. What This Indicator Does The indicator calculates several analytical components: Quantum Flow Oscillator - A custom oscillator built from multiple EMA layers at different depths Flow Momentum - Rate of change of the flow oscillator Order Flow Delta - Buy vs sell volume pressure estimation Smart Money Index - Volume-weighted directional bias metric Multi-Timeframe Entanglement - Price correlation across 15m and 60m timeframes Liquidity Zones - Historical swing high/low levels with volume significance Wave Function State - Momentum-based decisiveness detection How It Works The core quantum oscillator uses a custom EMA calculation with depth layering: quantumOscillator(series float src, simple int len, simple int depth) => float osc = 0.0 for i = 1 to depth int fastLen = len / i int slowLen = len * i float emaFast = quantumEMA(src, fastLen) float emaSlow = quantumEMA(src, slowLen) osc += (emaFast - emaSlow) / depth osc This creates a multi-layered view of momentum by comparing EMAs at progressively different speeds. Signal Generation Basic signals occur when: Bullish: Flow crosses above lower band + positive momentum + positive order flow delta Bearish: Flow crosses below upper band + negative momentum + negative order flow delta Strong signals require additional confirmation: Smart Money Index above/below threshold (50/-50) Entanglement score above 50% Wave function in collapsed state (decisive momentum) Confluence Score Calculation The indicator combines multiple factors into a single confluence percentage: float confluenceScore = (flowStrength * 20 + entanglementScore * 0.3 + math.abs(orderFlowDelta) * 0.5) / 3 Dashboard Panel (Top-Right) Flow Strength - Distance from center line normalized by standard deviation Momentum - Current rate of change of flow Trend - BULLISH/BEARISH/NEUTRAL based on flow vs EMA Confluence Score - Combined factor percentage Order Flow Delta - Buy/sell pressure percentage Entanglement - Multi-timeframe correlation score Wave State - COLLAPSED or SUPERPOSITION Signal - Current actionable status Visual Elements Flow Lines - Center flow line with upper/lower bands Quantum Zones - Filled areas between bands showing bullish/bearish zones 3D Quantum Field - Five oscillating layers creating depth visualization Order Flow Blocks - Boxes highlighting significant order flow imbalances Liquidity Heatmap - Dashed lines at significant historical levels Signal Markers - Triangles for basic signals, labels for strong signals Input Parameters Flow Period (default: 21) - Base period for flow calculations Quantum Depth (default: 3) - Number of EMA layers Sensitivity (default: 1.5) - Band width multiplier Liquidity Max Levels (default: 8) - Maximum liquidity zones displayed Liquidity Min Strength Ratio (default: 0.10) - Minimum volume significance Suggested Use Cases Identify momentum direction using flow oscillator position Confirm entries with order flow and smart money readings Use liquidity zones as potential support/resistance areas Wait for strong signals with multiple factor confirmation Timeframe Recommendations Effective on 15m to Daily charts. Lower timeframes may produce more signals with higher noise levels. Limitations Order flow is estimated from candle structure, not actual order book data Multi-timeframe requests add processing time Liquidity zones are based on historical pivots and may not reflect current market structure Open-Source and Disclaimer This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management. - Made with passion by officialjackofalltrades
Indicateur Pine Script®
par officialjackofalltrades
Options Chain Table [Enhanced]The primary purpose of this script is Unusual Options Activity (UOA) Detection.Identifying "Whales": Traders use it to spot when large institutions or "smart money" are aggressively buying Calls (betting price goes up) or Puts (betting price goes down).Contextualizing Volume: Instead of just showing raw volume (e.g., "10,000 contracts traded"), it calculates a Ratio. If the average volume is 1,000 and today's volume is 10,000, that is a 10x Spike, which is highly significant.0DTE & Short-Term Trading: It is optimized for analyzing the "Active Expiration" (often the current day for SPX/NDX), making it useful for 0DTE (Zero Days to Expiration) strategies.2. Key Features & VisualsThe script overlays a table on your chart with the following columns:ColumnDescriptionCall AvgThe historical average volume (Moving Average) for the Call option.Call RatioThe "Spike Factor." calculated as $ NSE:CURRENT Volume / Average Volume$$. High ratios turn Green.Call VolThe actual volume traded today for that Call strike.StrikeThe Strike Price of the option (e.g., 5800). The "At-The-Money" (ATM) strike is highlighted Blue.Put VolThe actual volume traded today for that Put strike.Put RatioThe "Spike Factor" for Puts. High ratios turn Red/Fuchsia.Put AvgThe historical average volume (Moving Average) for the Put option.3. How It Works (Technical Breakdown)This script uses advanced Pine Script techniques to bypass some of TradingView's limitations regarding options data.A. Dynamic Symbol ConstructionTradingView does not have a simple function to "get the option chain." This script manually constructs the ticker symbol for each option contract using the OPRA format:Format: OPRA:ROOT Example: OPRA:SPXW251226C5800 (SPX Weekly, Dec 26, 2025, Call, 5800 Strike).B. Tuple Fetching (Optimization)TradingView limits scripts to 40 request.security calls. To display 11 rows of data (which would normally require 44 calls: Call Vol, Call MA, Put Vol, Put MA per row), the script uses Tuple Fetching. It requests the Volume and the Moving Average in a single request, cutting the data usage in half and allowing the table to load faster without errors.C. Spike LogicIt calculates a moving average (EMA or SMA) of the volume over a set lookback period (default 20 bars).Medium Spike (M): Volume is > 2x the average.Large Spike (L): Volume is > 3.5x the average.Extreme Spike (E): Volume is > 5x the average.4. How to Use It (User Guide)To use this script effectively, you must configure the "Inputs" correctly, as it cannot always guess the correct expiration dates automatically.Add to Chart: Add the script to a chart (works best on indices like SPX, NDX, SPY, QQQ).Set the Center Price (Crucial):In the settings, look for "Manual Center Price".Input the current price of the asset (e.g., if SPX is at 5815, enter 5815).Why? The script generates strikes around this number. If you leave it 0, it might try to use the close price, which can be buggy during pre-market or if data is delayed.Set the Expiration (DTE):The script attempts to default to "Today," but for best results, manually enter the date in YYMMDD format in the "Manual DTE" field.Example: For December 26, 2025, enter 251226.Read the Alerts:The script allows you to set alerts in TradingView."Any Spike → CALL": Tells you a Call option just had a massive volume spike."Any Spike → PUT": Tells you a Put option just had a massive volume spike.5. Strategy ExampleA trader using this script might see the following scenario:Market: SPX is trading sideways at 5800.Signal: The table flashes a bright green cell on the 5850 Call with a ratio of "E 6.2x" (Extreme, 6.2 times normal volume).Interpretation: Someone is aggressively buying out-of-the-money Calls. The trader might interpret this as a bullish signal (Gamma exposure increasing at 5850) and enter a long position, expecting the price to be magnetized toward 5850.
Indicateur Pine Script®
par Mr-Anubis
1
ICT Concepts [Kodexius]ICT Concepts is an all in one, chart overlay toolkit that combines several widely used ICT style components into a single, modular workflow. It is designed to help you map higher timeframe context, track directional structure, and refine execution areas with imbalance and liquidity concepts, without turning the chart into a cluttered drawing board. Instead of plotting everything indefinitely, each module focuses on “live relevance” and chart readability. Zones, lines, and labels are managed with sensible limits so the most recent and most meaningful structures remain visible while older objects are automatically retired. Because the system is modular, you can run it like a complete toolkit: - Use multi timeframe Order Blocks to define high probability zones - Use Market Structure (BOS and MSS) for bias and context - Validate intent with SMT Divergence when you want intermarket confirmation - Refine with Imbalances (FVG, BPR, CE) and Liquidity Sweeps - Add timing structure via Killzones and risk structure via auto Fibonacci 🔹 Features 🔸 Multi Timeframe Order Blocks (3 candle displacement OB) The OB engine detects a strict 3 candle displacement sequence (bull and bear) and projects the “order block candle” as a forward extending zone. Detection can run on the chart timeframe or on a user selected higher timeframe and then be displayed on your execution chart. 🔸 Overlap Control Before adding a new OB, the script checks overlap against existing zones of the same direction. If a new zone intersects an existing one, it is ignored to reduce redundant stacking in the same price area. 🔸 Automatic Extension and Mitigation for Order Blocks OB zones extend forward on every bar and are removed once mitigation is confirmed. Mitigation is evaluated by close breaking decisively beyond the relevant boundary: - Bullish OB mitigates when close prints below the OB bottom - Bearish OB mitigates when close prints above the OB top 🔸 Market Structure (BOS and MSS) Market Structure is built from swing pivots using a configurable pivot length. When price closes through the latest swing, the script prints a structure event: BOS (Break of Structure) for continuation MSS (Market Structure Shift) for a directional change To keep the chart readable, older structure drawings are capped by history limits. 🔸 SMT Divergence with optional mini panel SMT can compare the current instrument with a user selected symbol to highlight divergence at swing points. A divergence is flagged when one market makes a new swing extreme while the other fails to confirm. Optional: a compact right side “compare symbol” candle panel can be enabled so you can visually confirm what the secondary market is doing without leaving the chart. 🔸 Imbalances: FVG, BPR, and CE modes You can choose between three imbalance views depending on your style: FVG mode: Fair Value Gaps are plotted as extending zones CE mode: Consequent Encroachment is visualized using a midpoint line and a half zone fill BPR mode: Balanced Price Range is formed when a new FVG overlaps an opposing FVG, producing a “balanced” region that often behaves differently than a standalone gap 🔸 Automatic extension, limits, and mitigation for imbalances Imbalance objects extend forward until mitigated. Mitigation uses wick based logic: Bullish imbalance mitigates when price wicks below the zone bottom Bearish imbalance mitigates when price wicks above the zone top The script also enforces per side limits and removes older items to keep performance stable. 🔸 Liquidity sweeps (buyside and sellside) The liquidity module tracks swing highs and lows and marks sweep events when price runs the level and then closes back through it, which often behaves like a rejection signal. Sweeps are visualized with a level line plus a small sweep highlight box, with an optional history cap. 🔸 Auto anchored Fibonacci (EQ and OTE focus) Fibonacci levels are automatically anchored using the most recent structure context so you do not need to manually re draw fibs every time the market evolves. EQ and OTE focused bands are plotted to support common premium discount style workflows, with optional extra levels if desired. 🔸 Killzones (session boxes with optional range tracking) Asian, London Open, New York AM, and New York PM killzones can be displayed using UTC-5 session definitions. Session boxes dynamically expand as new highs and lows are formed during the session, and historical zones can be retained up to a user set count. Rendering is restricted to intraday timeframes up to 60 minutes for clean scaling and performance. 🔹 Calculations 1) Order Block detection (3 candle displacement) The OB pattern is defined inside detectLogic() . The zone boundaries always come from candle (the middle candle of the 3 candle sequence). detectLogic() => bool isBull = open > close and close > open and close > open and low < low and close > high bool isBear = open < close and close < open and close < open and high > high and close < low [isBull, high , low , time , isBear, high , low , time ] Interpretation (bullish side): Candle is bearish Candle is bullish (the OB candle) Current candle is bullish and closes above high low undercuts low to form the sweep style condition Bearish logic is the mirrored inverse. 2) Multi timeframe projection and duplicate control If the timeframe input is set, detections are computed on that timeframe and projected onto the current chart using request.security . A last processed time check prevents duplicate prints. = request.security(syminfo.tickerid, i_tf, detectLogic()) var int lastBullTime = 0 var int lastBearTime = 0 if mtf_isBull and mtf_bullTime != lastBullTime lastBullTime := mtf_bullTime if mtf_isBear and mtf_bearTime != lastBearTime lastBearTime := mtf_bearTime 3) OB overlap validation and mitigation Overlap is checked before pushing a new zone, then zones are extended and removed once mitigated by close. method hasOverlap(array OBs, float top, float bottom) => bool overlap = false if OBs.size() > 0 for i = 0 to OBs.size() - 1 OB item = OBs.get(i) if (top < item.top and top > item.bottom) or (bottom > item.bottom and bottom < item.top) overlap := true break overlap method isMitigated(OB this, float currentClose) => this.isBull ? (currentClose < this.bottom) : (currentClose > this.top) 4) Market Structure: pivots, BOS, and MSS Swings are derived from pivots; then BOS/MSS prints when price crosses the latest swing. The script tracks trend state to decide whether the break is continuation (BOS) or shift (MSS). float ph = ta.pivothigh(i_structLen, i_structLen) float pl = ta.pivotlow(i_structLen, i_structLen) bool brokenHigh = ta.crossover(close, lastHigh) bool brokenLow = ta.crossunder(close, lastLow) // drawStructure(..., "BOS", ...) or drawStructure(..., "MSS", ...) depending on trend state 5) SMT Divergence conditions SMT uses pivot highs/lows on both instruments. A bearish SMT prints when the main chart makes a higher high but the compare symbol fails to exceed its prior high. A bullish SMT prints when the main chart makes a lower low but the compare symbol fails to make a lower low. bool bearishSmt = not na(smtAHighPrev) and not na(smtBHighPrev) and (smtAHighLast > smtAHighPrev) and (smtBHighLast <= smtBHighPrev) bool bullishSmt = not na(smtALowPrev) and not na(smtBLowPrev) and (smtALowLast < smtALowPrev) and (smtBLowLast >= smtBLowPrev) 6) FVG detection, BPR construction, and CE level FVGs are detected via a classic 3 bar gap condition. When a new FVG overlaps an opposing FVG, the script builds a BPR using the intersecting region. CE is the midpoint (top + bottom) / 2, plotted as a dashed line plus a half fill box. bool fvgBullDetected = low > high bool fvgBearDetected = high < low // CE float ceLevel = (this.top + this.bottom) / 2 Imbalance mitigation uses wick logic: method isMitigated(FVG this, float currentHigh, float currentLow) => this.isBull ? (currentLow < this.bottom) : (currentHigh > this.top) 7) Liquidity sweep trigger A sweep is confirmed only when price runs the pivot level and closes back through it (reject style). bool sweepBull = i_showLiq and not na(liqLastLow) and not liqLastLowSwept and low < liqLastLow and close > liqLastLow bool sweepBear = i_showLiq and not na(liqLastHigh) and not liqLastHighSwept and high > liqLastHigh and close < liqLastHigh 8) Killzone session mapping Sessions are defined in UTC-5 using time() session strings. string kzTz = "UTC-5" kzInSession(string sess) => not na(time(timeframe.period, sess, kzTz)) bool inAsian = kzInSession("2000-0000") bool inLondon = kzInSession("0200-0500") bool inNY = kzInSession("0830-1100")
Indicateur Pine Script®
par UnknownUnicorn113699460
3
SCOTTGO - MOMO RVOL Trend Painter V2 (Elite Pro)SCOTTGO - MOMO RVOL Trend Painter V2 (Elite Pro) This professional-grade trend-following indicator identifies high-probability "Elite" entry points by combining Relative Volume (RVOL) with strict trend alignment and momentum filters. It is designed to filter out market noise and highlight only the most significant institutional moves. Core Features Elite Signal Logic: Triggers only when high RVOL (default >2.0x) aligns with a confirmed trend (Price vs. VWAP & 9EMA) and positive momentum (RSI & MACD). Dynamic Bar Coloring: Instantly paints bars Green (Bullish) or Red (Bearish) when all "Elite" criteria are met. Smart Labeling: Labels are corner-anchored to the left of the signal bar. This prevents visual clutter and ensures labels never obstruct new price action. Detailed Tooltips: Hover over any "Elite" flag to see a comprehensive breakdown of the specific metrics (RVOL value, Trend status, RSI, and MACD) that triggered the signal. Key Components RVOL Threshold: Adjustable sensitivity to volume spikes. Trend Filter: Optional requirement for price to stay above/below VWAP and the 9EMA. Momentum Filters: Integrated RSI and MACD confirmation to avoid "exhaustion" trades. Visual Customization: Full control over label spacing, colors, and opacity. How to use: Look for the ⭐ ELITE flags as confirmation for trend continuation or high-volume breakouts. Use the triangles for precise candle entry points. Disclaimer: Technical analysis tools are for informational purposes only. Trading involves significant financial risk.
Indicateur Pine Script®
par SCOTTGO
HTF Candles on Lower Timeframes (Manual OHLC)Hi everyone, this indicator is designed to plot higher timeframes candles on the chart. Here are the details: The data is built directly from OHLC values at specific time intervals, instead of using request.security. It supports 1H / 2H / 4H / 8H / 1D higher timeframes, and can be viewed on lower timeframes such as 5m / 10m / 15m / 30m. The main idea behind this chart is to serve as a foundation for building other indicators that need to operate on higher timeframes while still being visualized on lower timeframes. Feel free to share your feedback or ideas for improvement in the comments below.
Indicateur Pine Script®
par begril
Breakdown Hold (1m) - Manual Level//@version=6 // ============================================================================= // EN — Script Overview // Name: Breakdown Hold (1m) - Manual Level // Purpose: // Detect a simple pattern: price breaks below a manually set level, then // stabilizes ("holds") within ~1 minute (default) without further dumping. // When confirmed, it prints "HOLD OK" and triggers an alert. // // How it works: // 1) You input a fixed price Level. // 2) On the FIRST break below Level (LOW sweep by default), the script "arms". // 3) For the next N bars on the 1-minute stream (default N=1): // - If price drops too deep (beyond Max Further Drop), it fails. // 4) When the window ends: // - If it did NOT drop too deep AND it bounced from the window low by at // least Min Bounce (and optional reclaim above Level), it confirms HOLD. // // Recommended usage: // - Works best on a 1-minute chart. // - If you are on another timeframe, keep "Force 1m Evaluation" enabled // so the logic still evaluates on 1-minute data. // // Alert: // - Condition title: breakdown_hold_confirm // // ============================================================================= // 中文 — 脚本说明 // 名称：Breakdown Hold (1m) - Manual Level // 用途： // 识别一个非常简单的“跌破手动固定价位后，约 1 分钟内踩住不再继续下跌”的形态。 // 确认后在图上打出 “HOLD OK”，并触发提醒。 // // 原理： // 1) 手动输入固定价位 Level。 // 2) 当价格第一次跌破 Level（默认按 LOW 刺破）后进入监测（armed）。 // 3) 在接下来 N 根 1分钟K（默认 N=1）内： // - 若继续下探太深（超过允许最大继续下跌幅度），判定失败，不触发。 // 4) 窗口结束时： // - 若未下探过深，且从窗口最低点出现至少 Min Bounce 的反弹 // （可选要求收盘站回 Level 上方），则判定“踩住确认”。 // // 推荐用法： // - 最推荐 1分钟图使用。 // - 如果你在其他周期图上用，请保持 “Force 1m Evaluation” 开启， // 让判断仍然基于 1分钟数据进行。 // // 提醒条件： // - breakdown_hold_confirm // =============================================================================
Indicateur Pine Script®
par stsai1218
False Breakdown Long Confirm (dropthoughcashin)// ============================================================================= // EN — Script Introduction // Name: False Breakdown Long Confirm (dropthoughcashin) // Timeframe: Designed for 5-minute charts (works on other TFs but tuned for 5m) // // What this script does: // This indicator detects a “false breakdown” (liquidity sweep) below a support // level, followed by a reclaim and a retest-hold confirmation. When confirmed, // it prints a label and triggers the alert condition: dropthoughcashin. // // Core logic (3 steps): // 1) Define the support level (Key Level): // - Pivot mode: uses the latest confirmed pivot low as support. // - Manual mode: uses your manually entered support level. // 2) False breakdown + reclaim: // - Price sweeps below support (low < support), // - The sweep must be shallow (limited by ATR multiple or fixed points), // - Then price reclaims: close back above the support. // 3) Retest-hold confirmation (within N bars after reclaim): // - Price retests near the support (low <= support + tolerance), // - And closes at/above the support (hold), // - If confirmed within the window, signal triggers once. // // Key parameters: // - Max Penetration: filters out “deep breakdowns” you do NOT want. // - Retest tolerance: how close price must retest the support. // - Confirm within N bars: time limit to confirm after reclaim. // // Notes / Limitations: // - Pivot support is lagging by design (pivot is confirmed after pLen bars). // - This is a signal/alert tool, not a full trading strategy. // ============================================================================= // // 中文 — 脚本介绍 // 名称：False Breakdown Long Confirm（dropthoughcashin） // 周期：主要为 5分钟K 设计（其他周期也能用，但默认参数以 5m 优化） // // 脚本作用： // 本指标用于识别“假跌破（扫流动性/扫止损）”形态：价格先刺破支撑位，随后快速收回 // 并在短时间内回踩踩住，形成做多确认。确认后会在图上打标签，并触发提醒条件： // dropthoughcashin。 // // 核心逻辑（3步）： // 1) 定义支撑位（Key Level）： // - Pivot 模式：用最近确认的 pivot low（局部低点）作为支撑。 // - Manual 模式：用你手动输入的固定支撑价位。 // 2) 假跌破 + 收回（reclaim）： // - 价格最低点刺破支撑（low < 支撑）， // - 但下穿幅度必须“浅”（用 ATR 倍数或固定点数限制）， // - 随后收盘重新站回支撑上方（close > 支撑）。 // 3) 回踩踩住确认（retest-hold）： // - 在收回之后的 N 根K内，价格回踩到支撑附近（low <= 支撑 + 容忍）， // - 且收盘守住支撑（close >= 支撑）， // - 满足则触发一次信号与提醒。 // // 关键参数说明： // - Max Penetration（最大下穿深度）：过滤掉“下穿太深”的破位，避免误触发。 // - Retest tolerance（回踩容忍范围）：定义回踩要贴近支撑到什么程度。 // - Confirm within N bars（确认窗口）：收回后限定多少根K内必须完成回踩确认。 // // 注意事项： // - Pivot 支撑位天然滞后（需要 pLen 根K确认后才成立），属于“稳但晚”的设计。 // - 该脚本是信号/提醒工具，不是完整的交易策略（不包含止损止盈与仓位管理）。
Indicateur Pine Script®
par stsai1218
E9 MTF Candle Array E9 MTF Candle Array plots up to six selectable higher-timeframe candle sets (e.g., H1/H4/D1/W1) as “mini candles” stacked to the right of your chart for fast multi-TF context. For each HTF, it also draws a shaded High–Low range box on the main chart that spans the candle’s time window and updates in real time as the current HTF candle forms, then “locks” the prior box when a new HTF candle opens. Optional features include HTF labels and countdown timers, Open/Close/High/Low trace lines with price labels, day/interval markers, and imbalance highlighting (FVG/VI) on the displayed HTF candle array. *Work in progress.
Indicateur Pine Script®
par E9XBT
1