Volume InsiderThis indicator shows you the percentage of buyers and sellers per candle on any time frame. Please go into the setting and change the color for buy and sell to whatever you would like.
Forecasting
John Trade AlertsImagine you are watching a ball bounce up and down on a graph.
This script is like a set of rules that says:
When to start playing
When to stop playing
When you got some prize levels
and it yells to you (alerts) when those things happen.
The main ideas
Breakout Buy (ball jumps high)
There is a line drawn high on the chart called the breakout level.
If the price (the ball) closes above that line, and some extra “good conditions” are true (enough volume, uptrend, etc.),
the script says: “We entered a Breakout trade now.”
Pullback Buy (ball dips into a box)
There is a zone (a small box) between a low line and a high line: the pullback zone.
If the price closes inside that zone, and the pullback looks “healthy” (not too much volume, still above a moving average, etc.),
the script says: “We entered a Pullback trade now.”
Stops (when to get out if it goes wrong)
For each entry type (Breakout or Pullback), there is a red stop line under the price.
If the price falls below that stop line, the script says:
“Stop hit, we’re out of the trade.”
Hard Support / Invalidation (big no‑no level)
There is a special hard support line.
The script also looks at the 1‑hour chart in the background.
If a 1‑hour candle closes below that hard support, it says:
“Hard invalidation – idea is broken, get out.”
Targets (prize levels)
Above the current price there are several orange lines: Target 1, 2, 3A, 3B, 4A, 4B.
If the price goes up and crosses one of these lines, the script says:
“Target X reached!”
Trend and Volume “health checks”
It checks if the short‑term average price (SMA20) is going up → “uptrend.”
It can check if price is above a long‑term average (SMA200).
For breakouts, it checks if volume is stronger than usual (good push).
For pullbacks, it prefers quieter than usual volume (calm dip).
It can also check an Anchored VWAP line (a special average price from a chosen starting time) and only trade if price is above that too.
Remembering if you are “in a trade”
The script keeps a little memory:
Are we currently in a position (inPos) or not?
Was it a Breakout or a Pullback entry?
What is our entry price and active stop?
When it gets a new entry signal, it turns inPos to true, picks the right stop, and draws that stop line.
When a stop or hard invalidation happens, it sets inPos to false again.
It can also “forget” and reset at the start of a new trading day if you want.
Alerts
When:
you get a Breakout entry
or a Pullback entry
or a Stop is hit
or the hard support is broken on 1‑hour
or a Target is reached
the script sends a message you can use in TradingView alerts (pop‑ups, email, webhook, etc.).
Things you see on the chart
Teal line: Breakout level
Green lines: Pullback zone low & high
Red line: Active stop (only when you’re “in” a trade)
Orange lines: Targets 1, 2, 3A, 3B, 4A, 4B
Blue line: Anchored VWAP (if you turn it on)
Purple faint line: SMA20 (short‑term trend)
Gray faint line: SMA200 (long‑term trend)
Little label near the last bar that says:
if you’re IN or Flat
which type of entry (Breakout/Pullback)
what your current stop is
So in kid words:
It draws important lines on the chart.
It watches the price move like a ball.
When the ball does something special (jump above, fall below, hit a prize line),
it shouts to you with alerts.
It remembers if you’re in the game or not, and where your safety line (stop) is.
90m Quarter SSMT V1.02 {-TS}Overview: This script is a professional-grade indicator tailored for ICT (Inner Circle Trader) practitioners. It automates the visualization of 90-minute Quarters within major trading sessions and detects SMT (Smart Money Technique) Divergences across multiple symbols. It helps traders identify institutional accumulation/distribution by monitoring price action disparities between the current asset and chosen correlates (e.g., BTC vs. ETH).
Key Features:
Four Major Trading Sessions: Automatically segments the market into Asia, London, NY AM, and NY PM sessions with customizable timezone settings.
90-Minute Quarter Layout: Subdivides each session into four distinct 90-minute "Quarters" (Q1-Q4) using color-coded boxes to aid in "Time & Price" analysis.
Automated SMT Divergence Detection:
Daily/Session SMT: Compares the highs and lows of the current session against the previous session to find macro-level divergences.
90m Quarter SMT (Real-time): Performs micro-level analysis by comparing current quarter extremes with the previous one, offering early signals for potential reversals.
Dynamic Visual Annotations: Automatically draws trendlines and labels on the chart when bullish or bearish SMT is detected, clearly identifying which reference symbol is diverging.
Trading Application: Ideal for identifying "Judas Swings," confirming market structure shifts (MSS), and finding high-probability entries at the start of new time cycles.
Adaptive Multi-Method ForecastWhat This Indicator Does:
An intelligent forecasting system that predicts future price movement and provides automated TP/SL levels for trading across ALL timeframes.
📊 Core Features:
1. Adaptive Forecasting (3 Methods)
Linear Regression: Best for trending markets (Daily/Weekly)
EMA Projection: Best for fast-moving intraday (1m-1h)
Hybrid: Combines both methods for balanced approach
Auto Mode: Automatically selects the best method for your timeframe ✅
2. Visual Elements on Chart:
ElementColorWhat It ShowsForecast Line🟢 Green (bullish) / 🔴 Red (bearish) / 🟡 Yellow (neutral)Predicted price in X bars aheadLR Line (Blue)🔵 BlueLinear regression trend lineConfidence Zone🟢/🔴 Shaded area (65% visible)Probable price rangeUpper/Lower Bands🟢 Green / 🔴 Red lines (65% visible)Forecast uncertainty boundariesBUY Signal🟢 Small green triangle ▲Price crossed above trend - Long opportunitySELL Signal🔴 Small red triangle ▼Price crossed below trend - Short opportunity
3. Trade Management (TP/SL)
When BUY signal appears:
🟡 Yellow line = Entry price (where you bought)
🟢 Green line = Take Profit target (+2.5% by default)
🔴 Red line = Stop Loss (-1.5% by default)
When SELL signal appears:
🟡 Yellow line = Entry price (where you sold)
🟠 Orange line = Take Profit target (-2.5%)
🟣 Fuchsia line = Stop Loss (+1.5%)
Lines disappear when:
TP is hit ✅ (profit secured)
SL is hit ❌ (loss cut)
Ready for next signal
📱 Info Table (Top Right):
Shows real-time data:
Method: Which forecast method is active
Timeframe: Your current chart timeframe
Trend: Bullish ↑ / Bearish ↓ / Neutral →
Current: Current price
Forecast: Predicted price
Change: Expected % move
Position: LONG / SHORT / None
Entry: Your entry price (when in position)
P&L: Current profit/loss % (when in position)
⚙️ Settings You Can Adjust:
Forecast Settings:
Method: Auto (recommended) / Linear / EMA / Hybrid
Length: 20 bars (how much history to analyze)
Forecast Bars: 10 bars ahead (prediction distance)
Sensitivity: 1.0 (higher = more aggressive forecast)
Show Confidence Bands: ✅ On/Off
Trade Management:
Show TP/SL Levels: ✅ On/Off
Take Profit %: 2.5% (adjustable)
Stop Loss %: 1.5% (adjustable)
Use Forecast as TP: ❌ Off (uses fixed % instead)
🔔 Alerts Available:
BUY Signal - Bullish crossover detected
SELL Signal - Bearish crossunder detected
Long TP Hit - Take profit reached
Long SL Hit - Stop loss triggered
Short TP Hit - Take profit reached
Short SL Hit - Stop loss triggered
✅ Works On All Timeframes:
✅ Intraday: 1m, 5m, 15m, 30m, 1h (uses EMA Projection)
✅ Swing: 4h, Daily (uses Hybrid)
✅ Position: Weekly, Monthly (uses Linear Regression)
📈 How To Use:
Add to chart - Indicator loads automatically
Wait for signal - Green ▲ (BUY) or Red ▼ (SELL)
Enter trade - Yellow entry line appears
Set alerts - Get notified on TP/SL hits
Exit auto - When price hits green (TP) or red (SL) line
Repeat - Wait for next signal
⚠️ Important Notes:
Not 100% accurate - No indicator predicts perfectly
Use risk management - Always respect stop losses
Best in trends - Less accurate in sideways markets
Combine with other analysis - Support/resistance, volume, news
Backtest first - Test on historical data before live trading
🎯 Best Practices:
✅ Keep on "Auto" mode for best results
✅ Use on trending assets (stocks, crypto with clear direction)
✅ Respect all stop losses
✅ Don't override forecast with emotions
✅ Start with 10 forecast bars, adjust based on your trading style
✅ Enable all alerts for real-time notifications
Forecast OscillatorGeneral Overview
The Forecast Oscillator Plus (FOSC+) is not just another oscillator. It is an advanced quantitative analysis tool developed to bridge the gap left by traditional momentum indicators (like RSI or Stochastic) which often suffer from "lag" or remain pinned in extreme zones during strong trends.
This "Plus" version has been specifically engineered and optimized for high-velocity scalping and day-trading on assets like NAS100 (Nasdaq) and XAUUSD (Gold) using ultra-short timeframes (1-min, 5-min).
🛡️ Why is FOSC+ Different?
1. Linear Regression Intelligence
At the heart of this script is a powerful Linear Regression (LinReg) engine. Instead of comparing price to a simple average, FOSC+ calculates the percentage deviation between the current price and its predicted theoretical trajectory. This allows the indicator to identify not just if the price is "high" or "low," but if it is abnormally distanced from its current trend, signaling an imminent Mean Reversion.
2. Adaptive Dynamic Bands (Volatility-Adjusted)
A major weakness of classic oscillators is the use of fixed levels (e.g., 80/20). FOSC+ utilizes Standard Deviation to generate overbought and oversold zones that "breathe" with the market.
During high volatility, the bands expand to filter out noise and premature entries.
During low volatility, they tighten to capture precise turning points.
3. Institutional Volume Filter (Anti-Fakeout)
To succeed in the Nasdaq market, you must follow the "Smart Money." This script integrates a Volume Spike Filter. A signal (Buy/Sell) is only triggered if the current candle's volume is significantly higher than its moving average (adjustable multiplier). This ensures you only enter trades backed by real institutional strength.
4. Algo-Ready for PineConnector
The code has been structured for seamless automation. With built-in EMA smoothing to reduce 1-minute "market chatter," the signals are clean and sharp, minimizing execution errors when sending orders to MetaTrader 5 via PineConnector.
📈 Technical Trading Guide
Buy Signals (Green Triangle): Occur when the oscillator crosses above the dynamic oversold band OR crosses back above the zero line, provided that volume confirms the impulse.
Sell Signals (Red Triangle): Occur when the oscillator crosses below the dynamic overbought band OR breaks below the zero line from above, with volume confirmation.
Momentum Histogram: The colored columns indicate acceleration strength. Excellent for Trailing Stops: as long as the histogram is growing, the momentum is in your favor!.
⚙️ Recommended Parameters
Length (14): The "Sweet Spot" for balancing reactivity and reliability.
Smooth Len (4): Essential for 1-min charts to eliminate micro-fluctuations without adding lag.
Volume Mult (1.15): Filters out the bottom 15% of volume to keep only significant candles.
⚠️ Stress-Tested for Real Conditions
This script has been rigorously backtested with Slippage settings ranging from 10 to 25 points. Even under difficult market conditions with high spreads, the indicator maintains a positive expectancy, making it a premier tool for traders using Standard or Raw accounts.
US Stock Indexes Fundamental and Technical AnalysisThis indicator provides, real-time fundamental and technical analysis for the US stock market. It can be used for S&P 500 (SPX), NASDAQ 100 (NDX), Dow Jones (DJI), and the Russell 2000 (RUT).
Unlike standard lagging indicators, this tool combines Macro Data with technicals to forecast potential market shifts and identify trend strength.
QFX (Quantum foreign Exchange) PublicI actually use this trading signal tool myself before sharing it. It gives clear long and short signals by analyzing EMAs, mathematical calculations, and market patterns, so whether you’re just starting out or have been trading for years, it helps you spot setups and make smarter, more confident decisions.
Opening Range (RTH, Globex, Tokyo, London) [Tradeisto]This indicator provides a comprehensive solution for monitoring Opening Ranges across major global trading sessions—RTH (New York), Globex, Tokyo, and London, within a single script. It is designed for stability and precision on all timeframes.
Key Features
Multi-Session Support: Track four distinct opening ranges simultaneously:
RTH (New York): Auto-detects based on asset class:
Indices (NQ, ES, YM): 09:30 NY
Metals (Gold/Silver): 08:20 / 08:25 NY
Energy (Oil/NatGas): 09:00 NY
Currencies & More: Automatically sets the correct pit open.
Globex: 18:00 America/New_York
Tokyo: 09:00 Asia/Tokyo
London: 08:00 Europe/London
Native Timezone Handling:
Automatically adjusts for Daylight Saving Time (DST) using native Pine Script timezones.
Smart Labeling: Evening sessions (Globex, Tokyo) display the correct "Trading Day" date (e.g., Sunday evening labeled as Monday).
Hybrid Data Engine:
Ensures stability by automatically switching data fetching methods based on your chart's timeframe.
Zoom In: Uses request.security_lower_tf for high-resolution data when the Chart Timeframe > Session Duration.
Zoom Out: Uses standard request.security when the Chart Timeframe <= Session Duration, preventing runtime errors.
Customizable Durations:
Independently configure durations for each session (30s, 1m, 5m, 15m, 30m).
How to Use
Add Opening Range to your chart.
Open Settings to enable or disable specific sessions.
Select the desired Duration for each session.
Customize colors and borders to fit your chart theme.
Order Block Phenix v1.0Order Block Fenix is an indicator designed to identify true institutional order blocks based on clean market structure and price impulse.
The indicator automatically detects the last opposite candle before an impulsive move that resulted in:
• a Break of High, or
• a Break of Low.
The order block is built using the body of that candle:
• Bullish Order Block — the last bearish candle before a strong bullish impulse
• Bearish Order Block — the last bullish candle before a strong bearish impulse
Core Logic
Order Block Fenix relies only on confirmed market events:
1. Structure Break (Break of High / Break of Low)
An order block is formed only if price genuinely breaks the previous high or low.
2. Impulse Move
The impulse can consist of:
• one large directional candle, or
• a sequence of multiple consecutive directional candles.
3. No Overlap (Imbalance)
The impulse must not be “contaminated” by overlapping wicks from previous candles.
Small wicks are acceptable, but full range overlap is not.
Order Block Invalidation
An order block is permanently removed if:
• Bullish OB — price breaks the zone to the downside,
• Bearish OB — price breaks the zone to the upside.
Once invalidated, order blocks are deleted forever and never reappear.
What This Approach Delivers
• Only valid, non-invalidated order blocks remain on the chart
• Old and broken zones are automatically removed
• Clear insight into where the market has truly defended price
Best Used For
• spot and margin trading
• market structure analysis
• Smart Money concepts
• swing and position trading
Order Block Fenix does not draw noise.
It shows only what the market has truly confirmed.
Hayaller ve Gercekler Beam - Chaos Projection & Temporal Nexus
Markets are more than just numbers; they are reflections of time, energy, and human psychology.
Beam is designed to find the hidden order within market chaos and map out the "price-time" intersections that the market has yet to reach. While standard indicators only analyze the past, Beam generates forward-looking projections using non-linear logic.
Core Highlights:
Temporal Mapping (X-Mapping): Visual markers indicating where price and time are expected to converge in the future.
Dynamic Revision: When the market triggers a new imbalance (chaos) signal, the system instantly validates or revises its previous projections.
Four-Dimensional Analysis: By categorizing the market into four primary zones, it identifies the unique momentum and "future bar" targets of each phase.
Key Note: This algorithm has been tested on selected low-volatility (slow-moving) assets, yielding a consistency rate exceeding 70%. We encourage you to perform your own tests and share your results to help refine the logic further.
TradeSkull Opening Candle Box range of your choiceopening candle range box....pick your time and you will have the high/low and extended range box that you can edit
Automated Risk Management HUDDESCRIPTION:
"Amateurs focus on how much they can make. Professionals focus on how much they can lose."
Most traders fail Funding Challenges (FTMO, The 5ers, etc.) not because they lack a strategy, but because of poor Risk Management and psychological loss of control.
Architect's Sentinel Pro is not just a position size calculator. It is a Discipline Enforcement System integrated directly into your chart. It eliminates mental math, prevents contract size errors, and acts as a psychological barrier against revenge trading.
CORE FEATURES:
1. Precision Asset Engine Stop guessing contract sizes. The engine automatically adjusts calculation logic for:
XAUUSD (Gold): Standardized for 100oz contracts.
Forex Majors: Standardized for 100,000 units.
JPY Pairs: Adjusted scaling.
Indices/Crypto: Flexible support.
2. Professional HUD (Heads-Up Display) A non-intrusive dashboard located at the top-right corner. It displays:
Exact Risk ($): precise to 2 decimal places.
Lot Size: Calculated instantly based on your risk parameters.
SL Levels: The exact price levels you need to input into your execution platform.
3. The "Bullet" System (Psychology Control) Gamify your risk. You input your Daily Loss Limit (e.g., $125). The tool calculates how many "Bullets" (Trades) you have left based on your risk per trade.
Green: Safe zone.
Orange: Caution (1 trade left).
RED: Daily Limit Reached -> CEASE TRADING IMMEDIATELY.
4. Hybrid Calculation Modes
Risk Based: You define the Max Risk ($) -> The tool calculates the Max Lot.
Lot Based: You define the Lot Size -> The tool audits the risk. If the calculated risk exceeds your limit, the HUD flashes a "VIOLATION" alert.
5. Flexible Stop Loss Logic
Auto (ATR Dynamic): Uses Average True Range to adapt SL to market volatility.
Fixed Distance: Set a fixed price distance (e.g., $5.00 on Gold).
Manual Level: Enter a specific price level for structural stops.
HOW TO USE:
Configuration: Open Settings. Input your Risk per Trade ($) and Daily Loss Limit ($).
Execution: Look at the HUD.
If BLUE/GREEN: Enter the Lot Size and SL Price shown.
If RED: Do not trade.
Accountability: If you take a loss, open Settings and increment the Losses Today counter. The system will deduct a "Bullet" from your inventory.
"Architects sell Blueprints, not Manual Labor." Let the tool handle the math. You focus on the execution.
Monthly Seasonality AnalyzerThis indicator analyzes historical performance/seasonality of a chosen month, from date of inception to present. Users can choose any calendar month via dropdown menu.
For each historical month selected, it will calculate the monthly percentage gain/loss, range(volatility), and average gain/loss percentage, average range percentage across all recorded years. Positive returns are colored green and negative returns are red. Also, calculates if the selected month was bullish(open>close) or bearish.
When current chart month matches the selected month, it shows the in-progress range as well.
Data is collected from 1930 to present. Results are shown in vertical and horizontal tables. If the vertical table exceeds a 36 years, the script automatically switches to horizontal table to display all the data, with option to change table position.
Overall this tool is valuable for seasonality research, such as Santa Rally, May Go Away and swing trading/ position trading to capture the monthly PO3 range.
Most seasonality indicators show all 12 months at once or use daily bars. This one zooms in deeply on one month only, providing detailed per-year breakdowns, accurate completed-month stats, and a practical live range display.
The script uses arrays to store years, gains, and ranges. Uses table.new(), table.cell(), table.merge_cells() for easily readable result display. Code handles the current in-progress month separately (shows live range without including it in historical averages).
**Script will not run on any timeframe other than monthly and displays error otherwise. Script is best used on spot and not futures.
Murrey Math Pro - OptionsHubMurrey Math Pro — OptionsHub
1. What Murrey Math Lines Are
Murrey Math Lines are a grid of support/resistance levels built by dividing a selected price range into 8 equal parts (0/8…8/8). The indicator complements the grid with “extensions” -1/8, -2/8, +1/8, +2/8, which reflect extreme zones beyond the main range.
The idea is simple:
* the market often moves in “steps” between fixed zones,
* the middle levels provide balance/flat zones,
* the extreme levels are zones of “overbought/oversold” and a high probability of reaction,
* extensions show anomalous moves beyond the frame and often act as a trigger for recalculation (shift) of the grid.
2. What the Indicator Shows on the Chart
The script builds:
a) Base grid (current timeframe)
* levels 0/8…8/8 (and optionally extensions ±1/8, ±2/8)
* the grid is calculated based on the selected “Frame mode” and “Anchor”
b) Optional MTF grid (higher timeframe)
* the same levels, but calculated on the selected higher TF (e.g., D)
* used for “level weight”: a higher-TF level is usually stronger
c) Bounce Stats (reaction statistics)
For each level (optionally: key only or all), statistics are tracked:
* Touches — how many times the level was touched
* Bounce% — percentage of successful “bounces” from the level among completed cases
3. Interpretation of Levels
Key levels
4/8 — the central level (balance)
* Often acts as an “axis”: around 4/8 the market tends to range/rotate.
* If price holds above 4/8, the level often acts as support. Below — as resistance.
0/8 and 8/8 — frame boundaries
* These are the extreme levels of the main grid; they often cause strong reactions.
* When approaching 0/8 or 8/8, the probability of sharp bounces/corrections is higher than at “weak” levels.
* A breakout with acceptance often means a “regime change” and a potential shift/rebuild of the frame (if enabled).
Intermediate levels
1/8 and 7/8 — “strength test” zones
* If price reaches 7/8 but cannot pass — often a pullback to 4/8.
* If it confidently breaks 7/8 and holds — the probability of a move to 8/8 and beyond the frame increases.
(For the downside, this is mirrored: 1/8 is tested during declines.)
2/8 and 6/8 — significant holding levels
* Often give a reaction, especially if confirmed by closes on one side of the level.
* If after a touch/bounce price quickly breaks the level by a close — this signals a weak reaction.
3/8 and 5/8 — working levels inside the range
* Often act as “steps”: the market may chop between them in sideways conditions.
* A break of 5/8 often increases the probability of a move toward 8/8.
* A break of 3/8 — the probability of a move toward 0/8.
Extensions
-1/8 and +1/8
* “Overstretch” zones beyond the frame.
* Often indicate weakening momentum and an increased probability of a return into the range.
-2/8 and +2/8
* Extreme zones.
* Often used as a “boundary after which it makes sense to rebuild the grid,” but not necessarily immediately: confirmations are important (in classical approaches, several consecutive closes are often mentioned).
4. How to Configure the Indicator
Step 1. Choose the “frame” (what to consider the range)
Open the Core & Frame menu:
* If you want a grid “from the actual range” — use:
* Mode = Range/8
* Frame mode = Auto (from data)
* If you want an “octave” grid (more stable ranges, closer to the classic approach) — use:
* Mode = Octave (normalized)
* Frame mode = Auto (from data)
* Octave pick = Nearest (usually the best default)
* If you need a strictly fixed frame size:
* Fixed (manual range) — you set the range manually
* Fixed (manual exponent 2^n) — range = 2^n (octave approach)
Step 2. Define how often HH/LL are recalculated
In the Anchor & Shift menu:
* Anchor = None (lookback)
The grid is recalculated from the last N bars (Lookback). Adapts quickly, but may “drift.”
* Anchor = Daily/Weekly/Monthly
The grid is built within the day/week/month using accumulated High/Low. More “regime-based” and stable.
Step 3. Configure Shift (frame rebuilding)
If shift is enabled, the grid can “move” so that price returns inside the frame (taking padding and confirmation into account).
5. Detailed Description of Menu Parameters
A) 🧩 Profiles
Profile Mode
* Off (Manual) — only manual settings are used.
* Scalp / Swing / Position — predefined parameters are applied for the style.
* Auto — the profile is selected automatically based on the chart timeframe:
* up to 15 minutes → Scalp
* up to 4 hours → Swing
* above → Position
**Important:** manual MTF toggles and their visual parameters take priority.
B) ⚙️ Core & Frame
Mode
* Range/8 — divides the currently selected range into 8 equal parts.
* Octave (normalized) — first normalizes the range to an “octave” size (2^n), then divides it into 8. Usually more stable.
Frame mode
* Auto (from data) — the range is taken from data (HH/LL).
* Fixed (manual range) — you set the range as a number (Fixed range).
* Fixed (manual exponent 2^n) — range = 2^n (Fixed exponent).
Fixed range
Used only with `Fixed (manual range)` — sets the frame size in price units.
Fixed exponent 2^n
Used only with `Fixed (manual exponent 2^n)` — sets n for 2^n.
Octave pic
Used in octave mode to select the nearest “octave”
* Nearest — nearest (universal default)
* Ceil — up (the frame is not smaller than the range)
* Floor — down (the frame is not larger than the selected range)
Base anchor
How to anchor the “lower boundary” of the frame to a multiple of the frame
* Floor / Round / Ceil to the frame multiple.
Min range (ticks)
Ensures a minimum frame size so that on very small prices/tickers there are no “zero” steps and artifacts.
C) 🧷 Anchor & Shift
High/Low Anchor
* None (lookback) — take HH/LL over Lookback.
* Daily / Weekly / Monthly — accumulate HH/LL within the period, reset at the period boundary.
Lookback (bars)
How many bars to consider when Anchor = None.
Anchor Cap (bars)
A limiter so that HH/LL accumulation does not grow infinitely on rare timeframes.
Enable Frame Shift
Enables rebuilding of the base (frame) if price goes beyond the boundaries (taking padding into account) and there is confirmation.
Shift Trigger
* Close — more “strict,” fewer false shifts.
* HL — reacts faster (uses high/low), but shifts more often on spikes.
Shift Padding (%)
Allowance that expands the frame boundaries:
* 0% — shift triggers immediately upon leaving the frame
* greater than 0% — allows price to “slightly exit” without rebuilding
Shift Confirm Bars
How many consecutive closed bars must be beyond the boundary (taking padding into account) before a shift occurs.
* 1 = reacts quickly
* 4+ = closer to the “conservative” classic recalculation
D) 📊 Bounce Stats
Calculate Bounce % for
* Off — statistics are not calculated.
* Key Only (0/4/8) — statistics only for key levels.
* All (0..8) — for all levels.
Touch tolerance (ticks) [/i
How many ticks are allowed for a “level touch.”
Increase if the instrument has many “noisy pierces.”
Touch cooldown (bars)
Anti-chatter: how many bars must pass for a new touch of the level to be counted again.
Show Panel
Shows the statistics table.
Panel Position
Position of the table on the chart.
E) 🖥️ Display
Draw Levels
Which levels to show: all / key only / key + quartile.
Show Extensions
Shows -2/-1/+1/+2.
Show Labels
Enables level labels.
Extend / Segment length
Lines can be extended to the right/left/both sides or drawn as a segment of a specified length.
F) 🧭 MTF (higher timeframe)
Show MTF grid
Displays a second grid calculated on a higher timeframe (e.g., D).
MTF timeframe
Timeframe of the MTF grid.
MTF show …
You can separately enable/disable:
* 0/8 and 8/8 (major)
* 4/8 (mid)
* weak levels 1/8..7/8
* extensions
6) Practical Usage Tips
1. For “classic” levels, start with:
* Octave (normalized) + Auto frame
* Anchor = Weekly (or Daily)
* Shift Trigger = Close
* Shift Confirm = 4 (conservative)
2. For intraday:
* Anchor = None (lookback) with a moderate lookback (e.g., 64–128)
* Shift Confirm = 1–2
* Enable MTF D to see “higher” levels as reference points
GS Quantum Radar [Elite Aesthetic - Bilingual]GS Quantum Radar / GS 量子雷達
Overview / 概述
Inspired by the quantum physics concept of "Ghostly action at a distance," the GS Quantum Radar is a high-end quantitative tool designed to capture the hidden correlations between two entangled assets (e.g., 2330.TW vs. TSM, or NVDA vs. AI sector). It identifies "Quantum Tension"—statistical deviations that signal imminent mean reversion or breakout opportunities.
受量子力學中**「幽靈般的遠距作用」**啟發，GS 量子雷達是一款專為捕捉資產間隱藏關聯而設計的高階量化工具（例如台積電與 TSM ADR，或 NVDA 與 AI 類股）。它能識別「量子張力」——即統計學上的異常偏離，預示著即將到來的均值回歸或突破機會。
Core Logic / 核心邏輯
The indicator operates on Statistical Arbitrage principles using a dynamic Z-Score model:該指標基於統計套利原理，採用動態 Z-Score 模型：
Entanglement Strength (Correlation) / 糾纏強度（相關性）： It measures how synchronized the two assets are. Signals are only valid when the correlation is high, ensuring you aren't trading noise.衡量兩項資產的同步程度。僅在相關性高時訊號才有效，確保您避開市場雜訊。
Quantum Tension (Z-Score) / 量子張力 (Z-Score)： Using the formula $Z = \frac{x - \mu}{\sigma}$, it calculates the price ratio deviation.透過公式 $$Z = \frac{x - \mu}{\sigma}$$
計算價差比率的偏離值。
$Z > +2$ (Red Column / 紅色柱狀): Particle A is overstretched (Overvalued). / 資產 A 擴張過度（相對高估）。
$Z < -2$ (Green Column / 綠色柱狀): Particle A is compressed (Undervalued). / 資產 A 壓縮過度（相對低估）。Shutterstock探索
Key Features / 主要功能
Bilingual Cyberpunk Dashboard / 中英雙語賽博龐克儀表板: Real-time monitoring of network status, entanglement strength, and tension levels with intuitive scale bars.即時監控網路狀態、糾纏強度與張力水平，配備直觀的比例尺進度條。
Aesthetic UI / 視覺美學: Designed with a Neon-Tokyo palette. Optimized for Dark Mode with a focus on high-density information display.採用霓虹東京配色。專為深色模式優化，專注於高密度資訊顯示。
Taiwan Style Color / 台股配色慣例: Red for Bullish/Up, Green for Bearish/Down.符合台股習慣：紅漲、綠跌。
How to Use / 如何使用
Select your pair / 選擇對象: Load the script on your primary chart (e.g., 2330.TW) and input the "Entangled Particle" (e.g., NASDAQ:TSM) in settings.在主圖表（如 2330.TW）掛載腳本，並在設定中輸入「糾纏對象」（如 NASDAQ:TSM）。
Monitor the Status / 監控狀態: Look for "STRONG BUY" or "TAKE PROFIT" advisories on the dashboard.觀察儀表板上的「強力買進 (STRONG BUY)」或「獲利了結 (TAKE PROFIT)」建議。
Execute / 執行交易: Enter when the "Quantum Tension" hits the $\pm 2.0$ thresholds while "Entanglement" is full.當「量子張力」達到 $\pm 2.0$ 臨界點且「糾纏強度」滿格時進場。
Disclaimer / 免責聲明Trading involves significant risk. This indicator is a statistical tool for decision support and does not guarantee profits. Use with proper risk management.交易涉及重大風險。本指標為輔助決策的統計工具，不保證獲利。請配合適當的風險管理使用。
EURUSD Macro-FX ScoreAdvanced fundamental and technical analysis of the eur/usd for long-term trading/forecasting. Recommended to use in a daily chart. Follow for more tools and ideas
Ultimate kNN Target Price and TimeDelivers Target-Price, Probability and Time to reach Target-Price.
TruTrend Market Bias FREETruTrend — Market Bias & Signal Indicator (Free)
TruTrend (Free) is a real-time market bias and signal indicator designed to help traders see trend direction and key buy/sell moments with clarity.
This version focuses on core trend structure and momentum shifts, giving you a clean visual read of the market without clutter. Signals update live and are intended to help traders stay on the right side of the move.
TruTrend Free is built to be simple, fast, and easy to use — ideal for traders who want structure without complexity.
What the Free Version Provides
• Market bias (bullish vs bearish)
• Basic buy & sell signals
• Trend structure visualization
• Clean, easy-to-read chart layout
Important Notes
• Signals are real-time and non-repainting
• Designed for general guidance, not trade automation
• Works across all markets and timeframes
Upgrade to Pro / Pro+
For advanced filtering, earlier entries, stronger confirmations, and premium features, check out TruTrend Pro and Pro+.
🔓 Upgrade access: whop.com
Sri - Bollinger Bands (Custom TF) Sri – Bollinger Bands (Custom Timeframe) is an enhanced Bollinger Bands indicator designed to provide higher-timeframe volatility structure directly on a lower-timeframe chart.
Instead of calculating bands on the chart’s native timeframe, this script allows traders to select an independent custom timeframe (CTF) for Bollinger Band computation, enabling clearer trend context, noise reduction, and multi-timeframe confluence.
This is not a visual mashup. The indicator uses true higher-timeframe statistical calculations via request.security(), ensuring that the basis, deviation, and bands are mathematically derived from the selected timeframe candles, not approximated or resampled.
🔍 How It Works (Conceptual Explanation)
Custom Timeframe Logic
Bollinger Bands are calculated entirely on the user-selected timeframe (e.g., 1H, 4H, Daily), regardless of the chart timeframe.
This allows traders on 5-min or 15-min charts to trade within higher-timeframe volatility envelopes.
Flexible Moving Average Basis
The middle band (basis) supports multiple MA types:
SMA
EMA
SMMA (RMA)
WMA
VWMA
This flexibility lets traders adapt the band behavior to trend-following, mean-reversion, or volume-weighted strategies.
Standard Deviation Envelope
Upper and lower bands are derived using true standard deviation from the selected timeframe’s price data.
The multiplier is user-controlled, allowing tighter or wider volatility envelopes.
Overlay-Friendly Design
Bands are plotted directly on price with optional offset support.
A soft background fill visually highlights the volatility zone without obscuring candles.
🧠 Why This Indicator Is Useful
Eliminates the need to switch charts to view higher-timeframe Bollinger Bands
Helps identify:
HTF support & resistance zones
Volatility expansion and contraction
Mean-reversion opportunities inside HTF structure
Especially effective for:
Intraday traders trading in the direction of HTF bands
Scalpers using HTF volatility boundaries as dynamic targets
Swing traders aligning entries with higher-timeframe compression or breakout zones
⚙️ Inputs Explained
Custom Timeframe – Timeframe used for Bollinger Band calculation
Length – Lookback period for MA and standard deviation
Basis MA Type – Choice of moving average for the middle band
Source – Price source (Close, HL2, etc.)
StdDev Multiplier – Controls band width
Offset – Visual displacement only (does not affect calculations)
📈 Example Use Cases
Trade 5-minute breakouts when price expands beyond the 1-hour upper band
Look for mean-reversion setups when price stretches outside daily Bollinger Bands
Combine with volume, VWAP, or trend filters for confirmation
🛡️ Notes
This script focuses on clarity and structure, not signal repainting or alerts.
Calculations are transparent and consistent with standard Bollinger Band methodology, enhanced through multi-timeframe statistical integrity.
Week Levels (OHLC, Settlement, CE) [Tradeisto]Weekly Levels (Tradeisto) is a sophisticated tool designed to bring institutional-grade weekly analysis to your chart. It goes beyond simple horizontal lines by combining authoritative Settlement data with pixel-perfect origination times, ensuring your levels are both accurate and contextually precise.
Key Features
Dual Precision Technology:
Price Accuracy: Uses the authoritative Weekly timeframe to capture Settlement
prices,
ensuring your levels match official exchange data (critical for Futures).
Visual Precision: Uses 15-minute timeframe data to pinpoint the exact origination
time of the High and Low. Your lines start exactly when the level was created, not just at the
"start of the week".
Dynamic Current Week:
Live Updates: Watch the "Current Week" Open, High, Low, and CE (50%) develop in
real-time.
Auto-Rename: When the trading week closes (e.g., Friday Settlement), the "Current"
labels automatically switch to "Week Open/High/Low" labels, seamlessly transitioning into
history.
Smart Labeling:
"Prev." Prefix: Automatically distinguishes the immediate previous week (labeled
"Prev.") from older history (labeled "Week").
Settlement Awareness: Automatically labels the Close as "Settlement" for Futures
contracts when enabled, and "Close" for other assets.
Historical Reference: Configurable "Weeks to Show" allows you to keep a clean chart or dig deep into past market structure.
Settings
Settlement as Close: Toggle this to prioritize the Settlement price for the Weekly Close (Standard for Futures analysis).
Weeks to Show: Control how much history remains on your chart.
Current Week Visibility: Toggle individual components for the developing week (Open, High, Low, CE).
Tradeisto delivers a professional, clean, and highly accurate weekly framework for serious market analysis.
Risk Reward Table Only UYRisk–Reward Template (UY) — How to Read & Use It
This tool is designed to make position risk and reward fully transparent before you trade.
What You Enter (Inputs)
Account Size ($)
Your total trading capital.
Account Invested ($)
How much capital you are allocating to this position before leverage.
Entry and Exit Prices
How to Use This Tool Properly
If Total Risk % feels uncomfortable, the trade is oversized.
If Stop % is large, If Gain doesn’t justify Risk, skip the trade.
If Leverage inflates risk too much, reduce size
Session Levels (RTH OHLC, Settlement and others) [Tradeisto]Session Levels (Tradeisto) is a precision-focused trading tool designed to automatically plot the most critical price levels for intraday and swing analysis. Built for traders who rely on session structure, this indicator keeps your chart clean by managing levels dynamically.
Key Features
RTH Structure: Automatically detects and plots Regular Trading Hours (RTH) High, Low, Open, and Close.
Key Daily Levels: Displays essential daily references including Settlement, Daily Open, and Midnight Open.
Smart Mitigation: Levels are dynamic—they remain on your chart until price acts upon them. Once a level is "mitigated" (touched), it is automatically removed to keep your workspace uncluttered.
Real-Time Visibility: Mitigated levels stay visible for the duration of the current bar, so you never miss a reaction in real-time.
Precision Origination: Unlike standard indicators, our lines originate from the exact timestamp where the level was created. This ensures pixel-perfect accuracy on lower timeframes (e.g., 1m, 5m).
Multi-Asset Support: Intelligent RTH detection for major asset classes including:
Indices (NQ, ES, YM)
Metals (Gold, Silver)
Energy (Crude, NG)
Currencies & Grains
Manual Mode for custom session times.
Customization
Fully customizable colors for every level type.
Adjustable lookback/history depth (choose how many days of past levels to keep).
Toggle visibility for individual components (e.g., show only Settlement and RTH High/Low).
Tradeisto provides the clarity you need to trade session levels with confidence.
Spot Taker Flow & Early Warning System How Does This Code Detect a "Fake" Rise?
Spot VWMA Logic: The moving average looks not only at the price but also at how much "spot volume" is circulating at that price.
Fake Rise Scenario: If the price (candles) is going up but the Yellow (Binance) or Blue (Coinbase) lines we've drawn are below it, or the price is drooping to the level of these lines; know that the rise is being triggered by bots in futures trading, not spot buyers. This is a "Fake" rise.
Confirmed Rise: If the price is above all these L1 lines, there may be "real money behind it".
