Commencez

Géométrie du Marché

DrawingMethodsLibrary "DrawingMethods" tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/Point object to string representation   Parameters:      this : DrawingTypes/Point object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/Point tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/LineProperties object to string representation   Parameters:      this : DrawingTypes/LineProperties object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/LineProperties tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/Line object to string representation   Parameters:      this : DrawingTypes/Line object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/Line tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/LabelProperties object to string representation   Parameters:      this : DrawingTypes/LabelProperties object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/LabelProperties tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/Label object to string representation   Parameters:      this : DrawingTypes/Label object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/Label tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/Linefill object to string representation   Parameters:      this : DrawingTypes/Linefill object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/Linefill tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/BoxProperties object to string representation   Parameters:      this : DrawingTypes/BoxProperties object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/BoxProperties tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/BoxText object to string representation   Parameters:      this : DrawingTypes/BoxText object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/BoxText tostring(this, sortKeys, sortOrder, includeKeys)   Converts DrawingTypes/Box object to string representation   Parameters:      this : DrawingTypes/Box object      sortKeys : If set to true, string output is sorted by keys.      sortOrder : Applicable only if sortKeys is set to true. Positive number will sort them in ascending order whreas negative numer will sort them in descending order. Passing 0 will not sort the keys      includeKeys : Array of string containing selective keys. Optional parmaeter. If not provided, all the keys are considered   Returns: string representation of DrawingTypes/Box delete(this)   Deletes line from DrawingTypes/Line object   Parameters:      this : DrawingTypes/Line object   Returns: Line object deleted delete(this)   Deletes label from DrawingTypes/Label object   Parameters:      this : DrawingTypes/Label object   Returns: Label object deleted delete(this)   Deletes Linefill from DrawingTypes/Linefill object   Parameters:      this : DrawingTypes/Linefill object   Returns: Linefill object deleted delete(this)   Deletes box from DrawingTypes/Box object   Parameters:      this : DrawingTypes/Box object   Returns: DrawingTypes/Box object deleted delete(this)   Deletes lines from array of DrawingTypes/Line objects   Parameters:      this : Array of DrawingTypes/Line objects   Returns: Array of DrawingTypes/Line objects delete(this)   Deletes labels from array of DrawingTypes/Label objects   Parameters:      this : Array of DrawingTypes/Label objects   Returns: Array of DrawingTypes/Label objects delete(this)   Deletes linefill from array of DrawingTypes/Linefill objects   Parameters:      this : Array of DrawingTypes/Linefill objects   Returns: Array of DrawingTypes/Linefill objects delete(this)   Deletes boxes from array of DrawingTypes/Box objects   Parameters:      this : Array of DrawingTypes/Box objects   Returns: Array of DrawingTypes/Box objects clear(this)   clear items from array of DrawingTypes/Line while deleting underlying objects   Parameters:      this : array   Returns: void clear(this)   clear items from array of DrawingTypes/Label while deleting underlying objects   Parameters:      this : array   Returns: void clear(this)   clear items from array of DrawingTypes/Linefill while deleting underlying objects   Parameters:      this : array   Returns: void clear(this)   clear items from array of DrawingTypes/Box while deleting underlying objects   Parameters:      this : array   Returns: void draw(this)   Creates line from DrawingTypes/Line object   Parameters:      this : DrawingTypes/Line object   Returns: line created from DrawingTypes/Line object draw(this)   Creates lines from array of DrawingTypes/Line objects   Parameters:      this : Array of DrawingTypes/Line objects   Returns: Array of DrawingTypes/Line objects draw(this)   Creates label from DrawingTypes/Label object   Parameters:      this : DrawingTypes/Label object   Returns: label created from DrawingTypes/Label object draw(this)   Creates labels from array of DrawingTypes/Label objects   Parameters:      this : Array of DrawingTypes/Label objects   Returns: Array of DrawingTypes/Label objects draw(this)   Creates linefill object from DrawingTypes/Linefill   Parameters:      this : DrawingTypes/Linefill objects   Returns: linefill object created draw(this)   Creates linefill objects from array of DrawingTypes/Linefill objects   Parameters:      this : Array of DrawingTypes/Linefill objects   Returns: Array of DrawingTypes/Linefill used for creating linefills draw(this)   Creates box from DrawingTypes/Box object   Parameters:      this : DrawingTypes/Box object   Returns: box created from DrawingTypes/Box object draw(this)   Creates labels from array of DrawingTypes/Label objects   Parameters:      this : Array of DrawingTypes/Label objects   Returns: Array of DrawingTypes/Label objects createLabel(this, lblText, tooltip, properties)   Creates DrawingTypes/Label object from DrawingTypes/Point   Parameters:      this : DrawingTypes/Point object      lblText : Label text      tooltip : Tooltip text. Default is na      properties : DrawingTypes/LabelProperties object. Default is na - meaning default values are used.   Returns: DrawingTypes/Label object createLine(this, other, properties)   Creates DrawingTypes/Line object from one DrawingTypes/Point to other   Parameters:      this : First DrawingTypes/Point object      other : Second DrawingTypes/Point object      properties : DrawingTypes/LineProperties object. Default set to na - meaning default values are used.   Returns: DrawingTypes/Line object createLinefill(this, other, fillColor, transparency)   Creates DrawingTypes/Linefill object from DrawingTypes/Line object to other DrawingTypes/Line object   Parameters:      this : First DrawingTypes/Line object      other : Other DrawingTypes/Line object      fillColor : fill color of linefill. Default is color.blue      transparency : fill transparency for linefill. Default is 80   Returns: Array of DrawingTypes/Linefill object createBox(this, other, properties, textProperties)   Creates DrawingTypes/Box object from one DrawingTypes/Point to other   Parameters:      this : First DrawingTypes/Point object      other : Second DrawingTypes/Point object      properties : DrawingTypes/BoxProperties object. Default set to na - meaning default values are used.      textProperties : DrawingTypes/BoxText object. Default is na - meaning no text will be drawn   Returns: DrawingTypes/Box object createBox(this, properties, textProperties)   Creates DrawingTypes/Box object from DrawingTypes/Line as diagonal line   Parameters:      this : Diagonal DrawingTypes/PoLineint object      properties : DrawingTypes/BoxProperties object. Default set to na - meaning default values are used.      textProperties : DrawingTypes/BoxText object. Default is na - meaning no text will be drawn   Returns: DrawingTypes/Box object
Bibliothèque Pine Script™
par Trendoscope
2
DrawingTypesLibrary "DrawingTypes" User Defined Types for basic drawing structure. Other types and methods will be built on these. Point   Point refers to point on chart   Fields:      price : pivot price      bar : pivot bar      bartime : pivot bar time LineProperties   Properties of line object   Fields:      xloc : X Reference - can be either xloc.bar_index or xloc.bar_time. Default is xloc.bar_index      extend : Property which sets line to extend towards either right or left or both. Valid values are extend.right, extend.left, extend.both, extend.none. Default is extend.none      color : Line color      style : Line style, valid values are line.style_solid, line.style_dashed, line.style_dotted, line.style_arrow_left, line.style_arrow_right, line.style_arrow_both. Default is line.style_solid      width : Line width. Default is 1 Line   Line object created from points   Fields:      start : Starting point of the line      end : Ending point of the line      properties : LineProperties object which defines the style of line      object : Derived line object LabelProperties   Properties of label object   Fields:      xloc : X Reference - can be either xloc.bar_index or xloc.bar_time. Default is xloc.bar_index      yloc : Y reference - can be yloc.price, yloc.abovebar, yloc.belowbar. Default is yloc.price      color : Label fill color      style : Label style as defined in www.tradingview.com Default is label.style_none      textcolor : text color. Default is color.black      size : Label text size. Default is size.normal. Other values are size.auto, size.tiny, size.small, size.normal, size.large, size.huge      textalign : Label text alignment. Default if text.align_center. Other allowed values - text.align_right, text.align_left, text.align_top, text.align_bottom      text_font_family : The font family of the text. Default value is font.family_default. Other available option is font.family_monospace Label   Label object   Fields:      point : Point where label is drawn      lblText : label text      tooltip : Tooltip text. Default is na      properties : LabelProperties object      object : Pine label object Linefill   Linefill object   Fields:      line1 : First line to create linefill      line2 : Second line to create linefill      fillColor : Fill color      transparency : Fill transparency range from 0 to 100      object : linefill object created from wrapper BoxProperties   BoxProperties object   Fields:      border_color : Box border color. Default is color.blue      bgcolor : box background color      border_width : Box border width. Default is 1      border_style : Box border style. Default is line.style_solid      extend : Extend property of box. default is extend.none      xloc : defines if drawing needs to be done based on bar index or time. default is xloc.bar_index BoxText   Box Text properties.   Fields:      boxText : Text to be printed on the box      text_size : Text size. Default is size.auto      text_color : Box text color. Default is color.yellow.      text_halign : horizontal align style - default is text.align_center      text_valign : vertical align style - default is text.align_center      text_wrap : text wrap style - default is text.wrap_auto      text_font_family : Text font. Default is Box   Box object   Fields:      p1 : Diagonal point one      p2 : Diagonal point two      properties : Box properties      textProperties : Box text properties      object : Box object created
Bibliothèque Pine Script™
par Trendoscope
4
Wave Generator Library (WGL)Library "WaveGenerator" Wave Generator Library max(source)   max   Parameters:      source : is the input to take the maximum.   Returns: foat min(source)   min   Parameters:      source : is the input to take the minimum.   Returns: foat min_max(src, height)   min_max   Parameters:      src : is the input for the min/max      height   Returns: float sine_wave(_wave_height, _wave_duration, _phase_shift, _phase_shift_2)   sine_wave   Parameters:      _wave_height : Maximum output level      _wave_duration : Wave length      _phase_shift : Number of harmonics      _phase_shift_2   Returns: float triangle_wave(_wave_height, _wave_duration, _num_harmonics, _phase_shift)   triangle_wave   Parameters:      _wave_height : Maximum output level      _wave_duration : Wave length      _num_harmonics : Number of harmonics      _phase_shift : Phase shift   Returns: float saw_wave(_wave_height, _wave_duration, _num_harmonics, _phase_shift)   saw_wave   Parameters:      _wave_height : Maximum output level      _wave_duration : Wave length      _num_harmonics : Number of harmonics      _phase_shift : Phase shift   Returns: float ramp_saw_wave(_wave_height, _wave_duration, _num_harmonics, _phase_shift)   ramp_saw_wave   Parameters:      _wave_height : Maximum output level      _wave_duration : Wave length      _num_harmonics : Number of harmonics      _phase_shift : Phase shift   Returns: float square_wave(_wave_height, _wave_duration, _num_harmonics, _phase_shift)   square_wave   Parameters:      _wave_height : Maximum output level      _wave_duration : Wave length      _num_harmonics : Number of harmonics      _phase_shift : Phase shift   Returns: float wave_select(style, _wave_height, _wave_duration, _num_harmonics, _phase_shift)   wave_select @peram style Select the style of wave. "Sine", "Triangle", "Saw", "Ramp Saw", "Square"   Parameters:      style      _wave_height : Maximum output level      _wave_duration : Wave length      _num_harmonics : Number of harmonics      _phase_shift : Phase shift   Returns: float
Bibliothèque Pine Script™
par The_Peaceful_Lizard
CommonTypesMathLibrary "CommonTypesMath" Provides a common library source for common types of useful mathematical structures. Includes: `complex, Vector2, Vector3, Vector4, Quaternion, Segment2, Segment3, Pole, Plane, M32, M44` complex   Representation of a Complex Number, a complex number `z` is a number in the form `z = x + yi`,   Fields:      re : Real part of the complex number.      im : Imaginary part of the complex number. Vector2   Representation of a two dimentional vector with components `(x:float,y:float)`.   Fields:      x : Coordinate `x` of the vector.      y : Coordinate `y` of the vector. Vector3   Representation of a three dimentional vector with components `(x:float,y:float,z:float)`.   Fields:      x : Coordinate `x` of the vector.      y : Coordinate `y` of the vector.      z : Coordinate `z` of the vector. Vector4   Representation of a four dimentional vector with components `(x:float,y:float,z:float,w:float)`.   Fields:      x : Coordinate `x` of the vector.      y : Coordinate `y` of the vector.      z : Coordinate `z` of the vector.      w : Coordinate `w` of the vector. Quaternion   Representation of a four dimentional vector with components `(x:float,y:float,z:float,w:float)`.   Fields:      x : Coordinate `x` of the vector.      y : Coordinate `y` of the vector.      z : Coordinate `z` of the vector.      w : Coordinate `w` of the vector, specifies the rotation component. Segment2   Representation of a line in two dimentional space.   Fields:      origin : Origin coordinates.      target : Target coordinates. Segment3   Representation of a line in three dimentional space.   Fields:      origin : Origin coordinates.      target : Target coordinates. Pole   Representation of polar coordinates `(radius:float,angle:float)`.   Fields:      radius : Radius of the pole.      angle : Angle in radians of the pole. Plane   Representation of a 3D plane.   Fields:      normal : Normal vector of the plane.      distance : Distance of the plane along its normal from the origin. M32   Representation of a 3x2 matrix.   Fields:      m11 : First element of the first row.      m12 : Second element of the first row.      m21 : First element of the second row.      m22 : Second element of the second row.      m31 : First element of the third row.      m32 : Second element of the third row. M44   Representation of a 4x4 matrix.   Fields:      m11 : First element of the first row.      m12 : Second element of the first row.      m13 : Third element of the first row.      m14 : fourth element of the first row.      m21 : First element of the second row.      m22 : Second element of the second row.      m23 : Third element of the second row.      m24 : fourth element of the second row.      m31 : First element of the third row.      m32 : Second element of the third row.      m33 : Third element of the third row.      m34 : fourth element of the third row.      m41 : First element of the fourth row.      m42 : Second element of the fourth row.      m43 : Third element of the fourth row.      m44 : fourth element of the fourth row.
Bibliothèque Pine Script™
par RicardoSantos
6
BasicVisibleChartBasic library for the visible range chart; with functions to allow plotting Fibs from body high/low as well as wick high/low -Thanks to code from @PineCoders Visible Chart library (PineCoders/VisibleChart/4), which is a much more comprehensive library than this, but which does not include some functions that I find useful: -Added the following exportable functions: highest/lowest body, highest/lowest close, highest/lowest open. These allow one to anchor fibs from bodies rather than wicks -Added a Fib Box function in the example code The above chart shows the example code plotting a Fib range drawn from bodies and a highlighted retracement zone (61.8 % - 78.6% ) ~~All Exportable Functions~~ barIsVisible() highestClose() highestOpen() highestBody() lowestClose() lowestOpen() lowestBody() high() highBarTime() low() lowBarTime() open() close()
Bibliothèque Pine Script™
par twingall
1
eHarmonicpatternsLogScaleLibrary "eHarmonicpatternsLogScale" Library provides functions to scan harmonic patterns both or normal and log scale getSupportedPatterns() get_prz_range(x, a, b, c, patternArray, errorPercent, start_adj, end_adj, logScale)   Provides PRZ range based on BCD and XAD ranges   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      patternArray : Pattern flags for which PRZ range needs to be calculated      errorPercent : Error threshold      start_adj : - Adjustments for entry levels      end_adj : - Adjustments for stop levels      logScale : - calculate on log scale. Default is false   Returns: Start and end of consolidated PRZ range get_prz_range_xad(x, a, b, c, patternArray, errorPercent, start_adj, end_adj, logScale)   Provides PRZ range based on XAD range only   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      patternArray : Pattern flags for which PRZ range needs to be calculated      errorPercent : Error threshold      start_adj : - Adjustments for entry levels      end_adj : - Adjustments for stop levels      logScale : - calculate on log scale. Default is false   Returns: Start and end of consolidated PRZ range get_projection_range(x, a, b, c, patternArray, errorPercent, start_adj, end_adj, logScale)   Provides Projection range based on BCD and XAD ranges   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      patternArray : Pattern flags for which PRZ range needs to be calculated      errorPercent : Error threshold      start_adj : - Adjustments for entry levels      end_adj : - Adjustments for stop levels      logScale : - calculate on log scale. Default is false   Returns: Array containing start and end ranges isHarmonicPattern(x, a, b, c, d, flags, defaultEnabled, errorPercent, logScale)   Checks for harmonic patterns   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      d : D coordinate value      flags : flags to check patterns. Send empty array to enable all      defaultEnabled      errorPercent : Error threshold      logScale : - calculate on log scale. Default is false   Returns: Array of boolean values which says whether valid pattern exist and array of corresponding pattern names isHarmonicProjection(x, a, b, c, flags, defaultEnabled, errorPercent, logScale)   Checks for harmonic pattern projection   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      flags : flags to check patterns. Send empty array to enable all      defaultEnabled      errorPercent : Error threshold      logScale : - calculate on log scale. Default is false   Returns: Array of boolean values which says whether valid pattern exist and array of corresponding pattern names.
Bibliothèque Pine Script™
par Trendoscope
1
FibRatiosLibrary "FibRatios" Library with calculation logic for fib retracement, extension and ratios retracement(a, b, ratio, logScale, precision)   Calculates the retracement for points a, b with given ratio and scale   Parameters:      a : Starting point a      b : Second point b      ratio : Ratio for which we need to calculate retracement c      logScale : Flag to get calculations in log scale. Default is false      precision : rounding precision. If set to netagive number, round_to_mintick is applied. Default is -1   Returns: retracement point c for points a,b with given ratio and scale retracementRatio(a, b, c, logScale, precision)   Calculates the retracement ratio for points a, b, c with given scale   Parameters:      a : Starting point a      b : Second point b      c : Retracement point. c should be placed between a and b      logScale : Flag to get calculations in log scale. Default is false      precision : rounding precision. If set to netagive number, round_to_mintick is applied. Default is 3   Returns: retracement ratio for points a,b,c on given scale extension(a, b, c, ratio, logScale, precision)   Calculates the extensions for points a, b, c with given ratio and scale   Parameters:      a : Starting point a      b : Second point b      c : Retracement point. c should be placed between a and b      ratio : Ratio for which we need to calculate extension d      logScale : Flag to get calculations in log scale. Default is false      precision : rounding precision. If set to netagive number, round_to_mintick is applied. Default is -1   Returns: extensoin point d for points a,b,c with given ratio and scale extensionRatio(a, b, c, d, logScale, precision)   Calculates the extension ratio for points a, b, c, d with given scale   Parameters:      a : Starting point a      b : Second point b      c : Retracement point. c should be placed between a and b      d : Extension point. d should be placed beyond a, c. But, can be with b,c or beyond b      logScale : Flag to get calculations in log scale. Default is false      precision : rounding precision. If set to netagive number, round_to_mintick is applied. Default is 3   Returns: extension ratio for points a,b,c,d on given scale
Bibliothèque Pine Script™
par Trendoscope
5
PatternLibrary "Pattern" Pattern object definitions and functions. Easily draw and keep track of patterns, legs, and points. Supported pattern types (as of Version 1): Type             Leg validation         # legs "xabcd"         Direction                3 or 4 (point D not required) "zigzag"         Direction                >= 2 "free"            None                      >= 2 erase_label(this)   Delete the point label   Parameters:      this : Point   Returns: Void draw_label(this, position, clr, transp, txt_clr, txt, tooltip, size)   Draw the point label   Parameters:      this : Point      position      clr      transp      txt_clr      txt      tooltip      size   Returns: line leg_init(a, b, prev, next, line)   Initialize a pattern leg   Parameters:      a : Point A (required)      b : Point B (required)      prev : Previous leg      next : Next leg      line : Line   Returns: New instance of leg object erase(this)   Delete the pattern leg   Parameters:      this : Leg   Returns: Void erase(this)   Parameters:      this draw(this, clr, style, transp, width)   Draw the pattern leg   Parameters:      this : Leg      clr : Color      style : Style ("solid", "dotted", "dashed", "arrowleft", "arrowright")      transp : Transparency      width : Width   Returns: line draw(this, clr, style, transp, width)   Parameters:      this      clr      style      transp      width leg_getLineTerms(this)   Get the slope and y-intercept of a leg   Parameters:      this : Leg   Returns: leg_getPrice(this, index)   Get the price (Y) at a given bar index (X) within the leg   Parameters:      this : Leg      index : Bar index   Returns: Price (float) pattern_init(legs, tp, name, subType, pid)   Initialize a pattern object from a given set of legs   Parameters:      legs : Array of pattern legs (required)      tp : Pattern type ("zigzag", "xabcd", or "free". dft = "free")      name : Pattern name      subType : Pattern subtype      pid : Pattern Identifier string   Returns: New instance of pattern object, if one was successfully created pattern_init(points, tp, name, subType, pid)   Initialize a pattern object from a given set of points   Parameters:      points      tp : Pattern type ("zigzag", "xabcd", or "free". dft = "free")      name : Pattern name      subType : Pattern subtype      pid : Pattern Identifier string   Returns: New instance of pattern object, if one was successfully created point   A point on the chart (x,y)   Fields:      x : Bar index (x coordinate)      y      label leg   A pattern leg (point A to point B)   Fields:      a : Point A      b      deltaX      deltaY      prev      next      retrace      line pattern   A pattern (set of at least 2 connected legs)   Fields:      legs      type      subType      name      pid
Bibliothèque Pine Script™
par reees
18
BpaLibrary "Bpa" TODO: library of Brooks Price Action concepts isBreakoutBar(atr, high, low, close, open, tail, size)   TODO: check if the bar is a breakout based on the specified conditions   Parameters:      atr : TODO: atr value      high : TODO: high price      low : TODO: low price      close : TODO: close price      open : TODO: open price      tail : TODO: decimal value for a percent that represent the size of the tail of the bar that cant be preceeded to be considered strong close      size : TODO: decimal value for a percent that represents by how much the breakout bar should be bigger than others to be considered one   Returns: TODO: boolean value, true if breakout bar, false otherwise
Bibliothèque Pine Script™
par yohtza
11
intersectLibrary "intersect" Find Line Intersection X/Y coordinates. Simple to use, will find intersection if it exists on the segments if the line segments do not cross on segment, an 'na' value will be returned if you plot new items with the output coords, they still plot. avoid this by setting a na(x) condition before plotting new items get(l1, l2, ( optional _round) )   line intersection coordinates   Parameters:      l1 : (line) first line      l2 : (line) second line      _round : True to make an INT for plotting     if not used, will not round ( overload loophole)   Returns: with x as int if bool is used
Bibliothèque Pine Script™
par kaigouthro
1
TrigLibrary "Trig" Trigonometric functions rt_get_angleAlpha(a, b, c, deg)   Get angle α of a right triangle, given the lengths of its sides   Parameters:      a : length of leg a (float)      b : length of leg b (float)      c : length of hypotenuse (float)      deg : flag to return angle in degrees (bool - default = false)   Returns: angle α in radians (or degrees if deg == true) rt_get_angleAlphaFromLine(x1, y1, x2, y2, l, deg)   Get angle α of a right triangle formed by the given line   Parameters:      x1 : x coordinate 1 (int - optional, required if argument l is not specified)      y1 : y coordinate 1 (float - optional, required if argument l is not specified)      x2 : x coordinate 2 (int - optional, required if argument l is not specified)      y2 : y coordinate 2 (float - optional, required if argument l is not specified)      l : line object (line - optional, required if x1, y1, x2, and y2 agruments are not specified)      deg : flag to return angle in degrees (bool - default = false)   Returns: angle α in radians (or degrees if deg == true) rt_get_angleBeta(a, b, c, deg)   Get angle β of a right triangle, given the lengths of its sides   Parameters:      a : length of leg a (float)      b : length of leg b (float)      c : length of hypotenuse (float)      deg : flag to return angle in degrees (bool - default = false)   Returns: angle β in radians (or degrees if deg == true) rt_get_angleBetaFromLine(x1, y1, x2, y2, l, deg)   Get angle β of a right triangle formed by the given line   Parameters:      x1 : x coordinate 1 (int - optional, required if argument l is not specified)      y1 : y coordinate 1 (float - optional, required if argument l is not specified)      x2 : x coordinate 2 (int - optional, required if argument l is not specified)      y2 : y coordinate 2 (float - optional, required if argument l is not specified)      l : line object (line - optional, required if x1, y1, x2, and y2 agruments are not specified)      deg : flag to return angle in degrees (bool - default = false)   Returns: angle β in radians (or degrees if deg == true)
Bibliothèque Pine Script™
par reees
3
rzigzagLibrary "rzigzag" Recursive Zigzag Using Matrix allows to create zigzags recursively on multiple levels. After bit of consideration, decided to make this public. zigzag(length, ohlc, numberOfPivots, offset)   calculates plain zigzag based on input   Parameters:      length : Zigzag Length      ohlc : Array containing ohlc values. Can also contain custom series      numberOfPivots : Number of max pivots to be returned      offset : Offset from current bar. Can be used for calculations based on confirmed bars   Returns: nextlevel(zigzagmatrix, numberOfPivots)   calculates next level zigzag based on present zigzag coordinates   Parameters:      zigzagmatrix : Matrix containing zigzag pivots, bars, bar time, direction and level      numberOfPivots : Number of max pivots to be returned   Returns: matrix zigzagmatrix draw(zigzagmatrix, newPivot, doublePivot, lineColor, lineWidth, lineStyle, showLabel, xloc)   draws zigzag based on the zigzagmatrix input   Parameters:      zigzagmatrix : Matrix containing zigzag pivots, bars, bar time, direction and level      newPivot : Flag indicating there is update in the pivots      doublePivot : Flag containing there is double pivot update on same bar      lineColor : Zigzag line color      lineWidth : Zigzag line width      lineStyle : Zigzag line style      showLabel : Flag to indicate display pivot labels      xloc : xloc preference for drawing lines/labels   Returns: draw(length, ohlc, numberOfPivots, offset, lineColor, lineWidth, lineStyle, showLabel, xloc)   calculates and draws zigzag based on zigzag length and source input   Parameters:      length : Zigzag Length      ohlc : Array containing ohlc values. Can also contain custom series      numberOfPivots : Number of max pivots to be returned      offset : Offset from current bar. Can be used for calculations based on confirmed bars      lineColor : Zigzag line color      lineWidth : Zigzag line width      lineStyle : Zigzag line style      showLabel : Flag to indicate display pivot labels      xloc : xloc preference for drawing lines/labels   Returns: drawfresh(zigzagmatrix, zigzaglines, zigzaglabels, lineColor, lineWidth, lineStyle, showLabel, xloc)   draws fresh zigzag for all pivots in the input matrix.   Parameters:      zigzagmatrix : Matrix containing zigzag pivots, bars, bar time, direction and level      zigzaglines : array to which all newly created lines will be added      zigzaglabels : array to which all newly created lables will be added      lineColor : Zigzag line color      lineWidth : Zigzag line width      lineStyle : Zigzag line style      showLabel : Flag to indicate display pivot labels      xloc : xloc preference for drawing lines/labels   Returns:
Bibliothèque Pine Script™
par Trendoscope
9
CommonMarkupLibrary "CommonMarkup" Provides functions for chart markup, such as indicating recession bands. markRecessionBands(showBands, lineY, labelY)   Mark vertical bands and show recession band labels if argument showBands is true. Example "markRecessionBands(bar_index ,3.0"   Parameters:      showBands : - show vertical recession bands when true. Functionally equiv to no op when false      lineY : - y-axis value for line positioning      labelY : - y-axis value for label positioning @return true - always answers the value of showBands
Bibliothèque Pine Script™
par foosmoo
divergenceLibrary "divergence" divergence: divergence algorithm with top and bottom kline tolerance regular_bull(series, series, simple, simple, simple, simple, simple) regular_bull: regular bull divergence, lower low src but higher low osc   Parameters:      series : float src: the source series      series : float osc: the oscillator index      simple : int lbL: look back left      simple : int lbR: look back right      simple : int rangeL: min look back range      simple : int rangeU: max look back range      simple : int tolerance: the number of tolerant klines   Returns: array: hidden_bull(series, series, simple, simple, simple, simple, simple) hidden_bull: hidden bull divergence, higher low src but lower low osc   Parameters:      series : float src: the source series      series : float osc: the oscillator index      simple : int lbL: look back left      simple : int lbR: look back right      simple : int rangeL: min look back range      simple : int rangeU: max look back range      simple : int tolerance: the number of tolerant klines   Returns: array: regular_bear(series, series, simple, simple, simple, simple, simple) regular_bear: regular bear divergence, higher high src but lower high osc   Parameters:      series : float src: the source series      series : float osc: the oscillator index      simple : int lbL: look back left      simple : int lbR: look back right      simple : int rangeL: min look back range      simple : int rangeU: max look back range      simple : int tolerance: the number of tolerant klines   Returns: array: hidden_bear(series, series, simple, simple, simple, simple, simple) hidden_bear: hidden bear divergence, lower high src but higher high osc   Parameters:      series : float src: the source series      series : float osc: the oscillator index      simple : int lbL: look back left      simple : int lbR: look back right      simple : int rangeL: min look back range      simple : int rangeU: max look back range      simple : int tolerance: the number of tolerant klines   Returns: array:
Bibliothèque Pine Script™
par dandrideng
eHarmonicpatternsExtendedLibrary "eHarmonicpatternsExtended" Library provides an alternative method to scan harmonic patterns. This is helpful in reducing iterations. Republishing as new library instead of existing eHarmonicpatterns because I need that copy for existing scripts. scan_xab(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern   Parameters:      bcdRatio : AB/XA ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. scan_abc_axc(abcRatio, axcRatio, err_min, err_max, patternArray) Checks if abc or axc ratio is in range of any harmonic pattern   Parameters:      abcRatio : BC/AB ratio      axcRatio : XC/AX ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. scan_bcd(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern   Parameters:      bcdRatio : CD/BC ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. scan_xad_xcd(xadRatio, xcdRatio, err_min, err_max, patternArray) Checks if xad or xcd ratio is in range of any harmonic pattern   Parameters:      xadRatio : AD/XA ratio      xcdRatio : CD/XC ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. isHarmonicPattern(x, a, b, c, d, flags, errorPercent) Checks for harmonic patterns   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      d : D coordinate value      flags : flags to check patterns. Send empty array to enable all      errorPercent : Error threshold   Returns: Array of boolean values which says whether valid pattern exist and array of corresponding pattern names isHarmonicProjection(x, a, b, c, flags, errorPercent) Checks for harmonic pattern projection   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      flags : flags to check patterns. Send empty array to enable all      errorPercent : Error threshold   Returns: Array of boolean values which says whether valid pattern exist and array of corresponding pattern names. get_prz_range(x, a, b, c, patternArray, errorPercent, start_adj, end_adj) Provides PRZ range based on BCD and XAD ranges   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      patternArray : Pattern flags for which PRZ range needs to be calculated      errorPercent : Error threshold      start_adj : - Adjustments for entry levels      end_adj : - Adjustments for stop levels   Returns: Start and end of consolidated PRZ range get_prz_range_xad(x, a, b, c, patternArray, errorPercent, start_adj, end_adj) Provides PRZ range based on XAD range only   Parameters:      x : X coordinate value      a : A coordinate value      b : B coordinate value      c : C coordinate value      patternArray : Pattern flags for which PRZ range needs to be calculated      errorPercent : Error threshold      start_adj : - Adjustments for entry levels      end_adj : - Adjustments for stop levels   Returns: Start and end of consolidated PRZ range
Bibliothèque Pine Script™
par Trendoscope
14
[e2] Drawing Library :: Horizontal Ray█ OVERVIEW Library "e2hray" A drawing library that contains the hray() function, which draws a horizontal ray/s with an initial point determined by a specified condition. It plots a ray until it reached the price. The function let you control the visibility of historical levels and setup the alerts. █ HORIZONTAL RAY FUNCTION hray(condition, level, color, extend, hist_lines, alert_message, alert_delay, style, hist_style, width, hist_width)   Parameters:      condition : Boolean condition that defines the initial point of a ray      level : Ray price level.      color : Ray color.      extend : (optional) Default value true, current ray levels extend to the right, if false - up to the current bar.      hist_lines : (optional) Default value true, shows historical ray levels that were revisited, default is dashed lines. To avoid alert problems set to 'false' before creating alerts.      alert_message : (optional) Default value string(na), if declared, enables alerts that fire when price revisits a line, using the text specified      alert_delay : (optional) Default value int(0), number of bars to validate the level. Alerts won't trigger if the ray is broken during the 'delay'.      style : (optional) Default value 'line.style_solid'. Ray line style.      hist_style : (optional) Default value 'line.style_dashed'. Historical ray line style.      width : (optional) Default value int(1), ray width in pixels.      hist_width : (optional) Default value int(1), historical ray width in pixels.   Returns: void █ EXAMPLES  • Example 1. Single horizontal ray from the dynamic input. //@version=5 indicator("hray() example :: Dynamic input ray", overlay = true) import e2e4mfck/e2hray/1 as e2draw inputTime = input.time(timestamp("20 Jul 2021 00:00 +0300"), "Date", confirm = true) inputPrice = input.price(54, 'Price Level', confirm = true) e2draw.hray(time == inputTime, inputPrice, color.blue, alert_message = 'Ray level re-test!') var label mark = label.new(inputTime, inputPrice, 'Selected point to start the ray', xloc.bar_time)  • Example 2. Multiple horizontal rays on the moving averages cross. //@version=5 indicator("hray() example :: MA Cross", overlay = true) import e2e4mfck/e2hray/1 as e2draw float sma1 = ta.​sma​(close, 20) float sma2 = ta.​sma​(close, 50) bullishCross = ta.crossover( sma1, sma2) bearishCross = ta.crossunder(sma1, sma2) plot(sma1, 'sma1', color.purple) plot(sma2, 'sma2', color.blue) // 1a. We can use 2 function calls to distinguish long and short sides. e2draw.hray(bullishCross, sma1, color.green, alert_message = 'Bullish Cross Level Broken!', alert_delay = 10) e2draw.hray(bearishCross, sma2, color.red, alert_message = 'Bearish Cross Level Broken!', alert_delay = 10) // 1b. Or a single call for both. // e2draw.hray(bullishCross or bearishCross, sma1, bullishCross ? color.green : color.red)  • Example 3. Horizontal ray at the all time highs with an alert. //@version=5 indicator("hray() example :: ATH", overlay = true) import e2e4mfck/e2hray/1 as e2draw var float ​ath​ = 0, ​ath​ := math.max(high, ​ath​) bool newAth = ta.change(​ath​) e2draw.hray(​nz​(newAth ), high , color.orange, alert_message = 'All Time Highs Tested!', alert_delay = 10)
Bibliothèque Pine Script™
par e2e4
16
FunctionPatternDecompositionLibrary "FunctionPatternDecomposition" Methods for decomposing price into common grid/matrix patterns. series_to_array(source, length) Helper for converting series to array.   Parameters:      source : float, data series.      length : int, size.   Returns: float array. smooth_data_2d(data, rate) Smooth data sample into 2d points.   Parameters:      data : float array, source data.      rate : float, default=0.25, the rate of smoothness to apply.   Returns: tuple with 2 float arrays. thin_points(data_x, data_y, rate) Thin the number of points.   Parameters:      data_x : float array, points x value.      data_y : float array, points y value.      rate : float, default=2.0, minimum threshold rate of sample stdev to accept points.   Returns: tuple with 2 float arrays. extract_point_direction(data_x, data_y) Extract the direction each point faces.   Parameters:      data_x : float array, points x value.      data_y : float array, points y value.   Returns: float array. find_corners(data_x, data_y, rate) ...   Parameters:      data_x : float array, points x value.      data_y : float array, points y value.      rate : float, minimum threshold rate of data y stdev.   Returns: tuple with 2 float arrays. grid_coordinates(data_x, data_y, m_size) transforms points data to a constrained sized matrix format.   Parameters:      data_x : float array, points x value.      data_y : float array, points y value.      m_size : int, default=10, size of the matrix.   Returns: flat 2d pseudo matrix.
Bibliothèque Pine Script™
par RicardoSantos
3
FunctionGenerateRandomPointsInShapeLibrary "FunctionGenerateRandomPointsInShape" Generate random vector points in geometric shape (parallelogram, triangle) random_parallelogram(vector_a, vector_b) Generate random vector point in a parallelogram shape.   Parameters:      vector_a : float array, vector of (x, y) shape.      vector_b : float array, vector of (x, y) shape.   Returns: float array, vector of (x, y) shape. random_triangle(vector_a, vector_b) Generate random vector point in a triangle shape.   Parameters:      vector_a : float array, vector of (x, y) shape.      vector_b : float array, vector of (x, y) shape.   Returns: float array, vector of (x, y) shape.
Bibliothèque Pine Script™
par RicardoSantos
1
eHarmonicpatternsLibrary "eHarmonicpatterns" Library provides an alternative method to scan harmonic patterns. This is helpful in reducing iterations scan_xab(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern   Parameters:      bcdRatio : AB/XA ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. scan_abc_axc(abcRatio, axcRatio, err_min, err_max, patternArray) Checks if abc or axc ratio is in range of any harmonic pattern   Parameters:      abcRatio : BC/AB ratio      axcRatio : XC/AX ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. scan_bcd(bcdRatio, err_min, err_max, patternArray) Checks if bcd ratio is in range of any harmonic pattern   Parameters:      bcdRatio : CD/BC ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. scan_xad_xcd(xadRatio, xcdRatio, err_min, err_max, patternArray) Checks if xad or xcd ratio is in range of any harmonic pattern   Parameters:      xadRatio : AD/XA ratio      xcdRatio : CD/XC ratio      err_min : minimum error threshold      err_max : maximum error threshold      patternArray : Array containing pattern check flags. Checks are made only if flags are true. Upon check flgs are overwritten. isHarmonicPattern(x, a, c, c, d, flags, errorPercent) Checks for harmonic patterns   Parameters:      x : X coordinate value      a : A coordinate value      c : B coordinate value      c : C coordinate value      d : D coordinate value      flags : flags to check patterns. Send empty array to enable all      errorPercent : Error threshold   Returns: Array of boolean values which says whether valid pattern exist and array of corresponding pattern names isHarmonicProjection(x, a, c, c, flags, errorPercent) Checks for harmonic pattern projection   Parameters:      x : X coordinate value      a : A coordinate value      c : B coordinate value      c : C coordinate value      flags : flags to check patterns. Send empty array to enable all      errorPercent : Error threshold   Returns: Array of boolean values which says whether valid pattern exist and array of corresponding pattern names
Bibliothèque Pine Script™
par Trendoscope
11
FunctionZigZagMultipleMethodsLibrary "FunctionZigZagMultipleMethods" ZigZag Multiple Methods. method(idx) Helper methods enumeration.   Parameters:      idx : int, index of method, range 0 to 4.   Returns: string function(method, value_x, value_y) Multiple method ZigZag.   Parameters:      method : string, default='(MANUAL) Percent price move over X * Y', method for zigzag.      value_x : float, x value in method.      value_y : float, y value in method.   Returns: tuple with: zigzag float direction reverse_line float realtimeofpivot int
Bibliothèque Pine Script™
par RicardoSantos
11
harmonicpatternsLibrary "harmonicpatterns" harmonicpatterns: methods required for calculation of harmonic patterns. These are customised to be used in my scripts. But, also simple enough for others to make use of :) isGartleyPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isGartleyPattern: Checks for harmonic pattern Gartley   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Gartley. False otherwise. isBatPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isBatPattern: Checks for harmonic pattern Bat   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Bat. False otherwise. isButterflyPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isButterflyPattern: Checks for harmonic pattern Butterfly   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Butterfly. False otherwise. isCrabPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isCrabPattern: Checks for harmonic pattern Crab   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Crab. False otherwise. isDeepCrabPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isDeepCrabPattern: Checks for harmonic pattern DeepCrab   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is DeepCrab. False otherwise. isCypherPattern(xabRatio, axcRatio, xadRatio, err_min, err_max) isCypherPattern: Checks for harmonic pattern Cypher   Parameters:      xabRatio : AB/XA      axcRatio : XC/AX      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Cypher. False otherwise. isSharkPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isSharkPattern: Checks for harmonic pattern Shark   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Shark. False otherwise. isNenStarPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isNenStarPattern: Checks for harmonic pattern Nenstar   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Nenstar. False otherwise. isAntiNenStarPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isAntiNenStarPattern: Checks for harmonic pattern Anti NenStar   Parameters:      xabRatio : - AB/XA      abcRatio : - BC/AB      bcdRatio : - CD/BC      xadRatio : - AD/XA      err_min : - Minumum error threshold      err_max : - Maximum error threshold   Returns: True if the pattern is Anti NenStar. False otherwise. isAntiSharkPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isAntiSharkPattern: Checks for harmonic pattern Anti Shark   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Anti Shark. False otherwise. isAntiCypherPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isAntiCypherPattern: Checks for harmonic pattern Anti Cypher   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Anti Cypher. False otherwise. isAntiCrabPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isAntiCrabPattern: Checks for harmonic pattern Anti Crab   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Anti Crab. False otherwise. isAntiBatPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isAntiBatPattern: Checks for harmonic pattern Anti Bat   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Anti Bat. False otherwise. isAntiGartleyPattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isAntiGartleyPattern: Checks for harmonic pattern Anti Gartley   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Anti Gartley. False otherwise. isNavarro200Pattern(xabRatio, abcRatio, bcdRatio, xadRatio, err_min, err_max) isNavarro200Pattern: Checks for harmonic pattern Navarro200   Parameters:      xabRatio : AB/XA      abcRatio : BC/AB      bcdRatio : CD/BC      xadRatio : AD/XA      err_min : Minumum error threshold      err_max : Maximum error threshold   Returns: True if the pattern is Navarro200. False otherwise. isHarmonicPattern(x, a, c, c, d, flags, errorPercent) isHarmonicPattern: Checks for harmonic patterns   Parameters:      x : X coordinate value      a : A coordinate value      c : B coordinate value      c : C coordinate value      d : D coordinate value      flags : flags to check patterns. Send empty array to enable all      errorPercent : Error threshold   Returns: Array of boolean values which says whether valid pattern exist and array of corresponding pattern names
Bibliothèque Pine Script™
par Trendoscope
4