Commencez

Moyennes mobiles

MA Strength Indicator EnhancedThe "MA Strength" is an indicator that measures market trend strength or (in the case of forex pairs) the relative strength of individual currencies based on up to five different moving averages (MA). It offers multiple calculation methods, such as simple summation, normalized value, or measuring ATR/percentage distance from the price. The results are summarized in a clear table, and it provides customizable alerts for trend changes or shifts in currency strength. The high level of configurability (e.g., MA weighting, "all MA alignment" requirement) allows for fine-tuning the strategy. 💬 Interpreting the Table (Top Rows) The top row of the table shows the final output of the indicator. This changes according to the set "Table Mode". Trend Mode: The top row shows the final, aggregated trend status (e.g., "BULLISH", "NEUTRAL") and the corresponding "Trend Value". This is the value the indicator compares to its thresholds. Forex Mode: (Only on 6-character pairs): The top two rows show the strength of the Base currency and the Quote currency separately. Calculation of the top rows: The indicator calculates the individual score of all active MAs (according to the chosen method). Trend Value: This is the final value calculated from the scores. If "Enable Averaging" is ON, this will be the average of the scores (e.g., MA1 score is 5.0, MA2 score is 7.0 -> Trend Value is 6.0). If averaging is OFF, this will be the sum of the scores (e.g., 5.0 + 7.0 = 12.0). Forex Calculation: "Forex Mode" uses this "Trend Value". If the Trend Value is +6.0 (on an EURUSD pair): The Base currency (EUR) value will be +6.0. The Quote currency (USD) value will be -6.0. The indicator compares these values to the thresholds to determine the "STRONG" status for EUR and "WEAK" status for USD. 📊 Calculation Methods The indicator can calculate trend strength using 5 methods. The final "Trend Value" is derived from the results of these calculations. Sum: Description: Simply adds up the individual scores of all enabled moving averages (MA). Formula: If the price is above an MA, it gets the "Score Above" value (e.g., +2.0); if below, it gets the "Score Below" value (e.g., -2.0). Example: Result = (MA1 score) + (MA2 score) + ... Normalized: Description: Takes the sum obtained by the "Sum" method and converts it to a scale between -100% (maximally bearish) and +100% (maximally bullish). It takes into account the maximum possible positive and negative scores. Formula: Result = (Total Score / Max Possible Score) * 100 Percentage Distance: Description: This method also considers distance. The further the price is from the MA in percentage terms, the higher the score. Formula: MA Score = (|Close Price - MA| / MA * 100) * Weight (The "Weight" is the "Score Above/Below" value set in settings). ATR Distance: Description: Similar to percentage distance, but normalizes the distance using volatility via ATR (Average True Range). Formula: MA Score = (|Close Price - MA| / ATR) * Weight Candle Count: Description: Counts how many consecutive candles have been above or below the MA. It multiplies this number by the set weight. Formula: MA Score = (Number of consecutive candles) * Weight ⚙️ Settings Options Moving Averages (MA 1-5) For each moving average, you can set: Enable MA: Turn the specific MA on or off. Type: The type of moving average (SMA, EMA, WMA, etc.). Period: The period of the MA (e.g., 50, 200). Score Above / Below: The most important setting. This defines the "weight" of the MA in the calculation. In "Sum" mode, this is a fixed score; in distance-based modes, this is a multiplier (weight). It is advisable to write a positive number for "Score Above" and a negative number for "Score Below". Calculation Settings Enable Averaging: If this is on, the indicator shows the average of the active MA scores, not the total score. Exception: This function is not available in "Normalized" mode. Require All MA Alignment: This is a strict filter. If enabled, the indicator only gives a "BULLISH" (or "STRONG") signal if the price is above all enabled moving averages. Similarly, a "BEARISH" signal only occurs if the price is below all moving averages. If the price is on the opposite side of even just one MA (e.g., above 4, below 1), the status becomes "NEUTRAL", regardless of the scores. Strength / Trend Thresholds Enable Extra Levels: If active, statuses are expanded: "EXT. BULLISH" / "EXT. BEARISH" (Trend mode) or "EXT. STRONG" / "EXT. WEAK" (Forex mode). This indicates stronger, overbought/oversold conditions. Threshold setting: The thresholds (e.g., "Strong Above - ATR") determine when the calculated value counts as a "STRONG" or "WEAK" status. 🔢 Setting Thresholds via Calculation If "Enable Averaging" is OFF, the "Trend Value" shown in the table will be the sum of the individual MA scores. Therefore, we must define the threshold by adding up the minimum expected performance from each moving average. This allows us to set different expectations for short, medium, and long-term averages. Step 1: Determine MA weights In our example, we use 3 active MAs with the following weights (Score Above values): MA1 (Short): Weight = +2 MA2 (Medium): Weight = +3 MA3 (Long): Weight = +4 Step 2: Determine the minimum expected distance Define a minimum distance expected from each MA to trigger a "Strong" signal. Step 3: Calculate target scores and the final threshold Note: If "Enable Averaging" is ON, the resulting value (sum of target scores) must be averaged to get the final threshold. Example 1: ATR Distance -Goal: I want a "Strong" signal if the price is... ...at least 1.0 ATR above MA1 (Short), ...at least 1.5 ATR above MA2 (Medium), ...and at least 2.0 ATR above MA3 (Long). -Calculation (Expected Distance * Weight): MA1 Target Score: 1.0 * 2 = 2.0 MA2 Target Score: 1.5 * 3 = 4.5 MA3 Target Score: 2.0 * 4 = 8.0 -Final Threshold (Sum of Target Scores): 2.0 + 4.5 + 8.0 = 14.5 -Setting: Set "Strong Above - ATR" threshold to 14.5. If "Enable Averaging" is ON, the obtained value must be averaged, and the result will be the threshold: 4.8 (14.5 / 3 = 4.83). Example 2: Percentage Distance -Goal: I want a "Strong" signal if the price is... ...at least 0.5% above MA1, ...at least 1.0% above MA2, ...and at least 1.5% above MA3. -Calculation (Expected Distance * Weight): MA1 Target Score: 0.5 * 2.0 = 1.0 MA2 Target Score: 1.0 * 3.0 = 3.0 MA3 Target Score: 1.5 * 4.0 = 6.0 -Final Threshold (Sum): 1.0 + 3.0 + 6.0 = 10.0 -Setting: Set "Strong Above - Percentage" threshold to 10.0. If "Enable Averaging" is ON, the obtained value must be averaged, and the result will be the threshold. Example 3: Candle Count -Goal: I want a "Strong" signal if... ...at least 3 consecutive candles are above MA1, ...at least 5 consecutive candles are above MA2, ...and at least 10 consecutive candles are above MA3. -Calculation (Expected Candle Count * Weight): MA1 Target Score: 3 * 2.0 = 6.0 MA2 Target Score: 5 * 3.0 = 15.0 MA3 Target Score: 10 * 4.0 = 40.0 -Final Threshold (Sum): 6.0 + 15.0 + 40.0 = 61.0 -Setting: Set "Strong Above - Candle" threshold to 61.0. If "Enable Averaging" is ON, the obtained value must be averaged, and the result will be the threshold. Example 4: Sum In this mode, distance does not matter, only whether the price is above or below the MA. -Goal: "Strong" signal if the price is above the long-term averages, but can be below the short-term (MA1). MA1 (Short): Can be below (Weight: -2.0) MA2 (Medium): Must be above (Weight: +3.0) MA3 (Long): Must be above (Weight: +4.0) -Calculation: -2.0 + 3.0 + 4.0 = 5.0 -Setting: Set "Strong Above - Sum" threshold to 5.0. If it must be above all three moving averages, the threshold would be 2.0 + 3.0 + 4.0 = 9.0. If "Enable Averaging" is ON, the obtained value must be averaged, and the result will be the threshold. Example 5: Normalized The basic logic is similar to the "Sum" method. -Goal: "Strong" signal if price is above MA2 and MA3, but potentially below MA1. -Calculation: Target Sum: 5.0. Max Possible Score (above all): 9.0. -Threshold: (5.0 / 9.0) * 100 = 55.5 In this calculation method, averaging cannot be set. The Usage of the "ATR %" Row The "ATR %" row shows the percentage movement of an average candle. How to use this with "Percentage Distance" mode: This number gives a baseline. It helps decide if the "Percentage Distance" threshold is realistic. Example: You see the "ATR %" value is hovering around 1.2%. This means a "normal" candle moves about 1.2%. If you set the Percentage threshold to 0.5%, it is too low. The indicator will constantly give a "Strong" signal because even average movement (noise) exceeds the threshold. Correct Usage: If "normal" movement is 1.2%, then a "strong" movement (trend) needs to be significantly larger. For example, set the threshold to double the ATR %: 2.4 (2 * 1.2). Thus, you only get a "Strong" signal if the movement is twice the average volatility. Supplementary Information Rounding Differences: The numbers displayed in the table and the precision of calculations in the background differ. Table Display: The indicator rounds numbers to two decimal places in the table. So, if the value is 0.996, the table shows 1.00 (rounded up). Internal Calculation: The background calculation uses much higher precision. When determining status (STRONG vs NEUTRAL), the program compares the precise, unrounded value to the threshold. Result: Due to rounding, it may happen that if the threshold is 1.00 and the table shows 1.00, the status flickers between Strong and Neutral. If this is bothersome, it is advisable to set a slightly lower threshold (e.g., 0.98). 🔔 Alert Settings The indicator can send alerts when the status changes. Alert Method: Trend: Alerts when the main trend status changes (e.g., from "NEUTRAL" to "BULLISH"). You can specify which direction to alert for (e.g., only "BULLISH"). Forex: Works only on 6-character forex pairs. You can set separate alerts for the Base or Quote currency. Forex Strength Level: You can specify at which status level to alert (e.g., "WEAK" or "EXT. STRONG"). 📈 Trading Tips Trend Confirmation: Use the "BULLISH" / "BEARISH" status to confirm your existing strategy (e.g., breakouts, bounces off support). Forex Pairing: In Forex mode, look for pairs where the Base currency is "STRONG" and the Quote currency is "WEAK" (or "EXT. STRONG" / "EXT. WEAK") for a long position. Short Position: Reverse the above (Base: WEAK, Quote: STRONG).
Indicateur Pine Script®
par nzsolti18
3
V-CORE SMA Matrix LiteV-CORE SMA Matrix Lite A clean, lightweight 5-SMA structure tool built using Pine Script v6. This open-source Lite edition provides a simple visual framework for identifying market structure using the most commonly used moving averages: 21 SMA 50 SMA 80 SMA 100 SMA 200 SMA Each line is individually adjustable and colour-coded for easy trend reading. No signals, no alerts, no automation — purely a visual tool for traders who prefer clarity over complexity. This Lite version exposes only basic, non-proprietary logic. Advanced regime systems, multi-stage confirmation models, and automation features are available only in the full V-CORE Engine suite. Part of the V-CORE Lite Series Free open-source tools designed for education, research, and clean charting. Follow our work: TradingView: VectorCoresAI X (Twitter): vectorcoresai Telegram: vectorcoresai
Indicateur Pine Script®
par Vectorcoresai
5 DMA Entry Plus5 DMA Entry Plus - Multi-Strategy Entry Signal Indicator Overview: The 5 DMA Entry Plus is a versatile entry signal indicator that combines multiple proven technical analysis methods to identify potential buy opportunities. This indicator is designed to be highly customizable, allowing traders to toggle between different entry strategies or combine them for confluence-based entries. Key Features: 1. Multiple Entry Strategy Options: Default Close Above Entry: Triggers when price closes above the 5-day moving average (with optional HMA filter) Green Wick Candle Signal: Identifies bullish candles where the wick pierces above key moving averages, indicating rejection of lower prices 5DMA Zero/Upslope Entry: Generates signals when the 5DMA is flat or sloping upward, confirming momentum HMA Cross Entry: Triggers when price crosses above the Hull Moving Average, a responsive momentum indicator 2. Adaptive HMA Filter: Toggle the HMA (Hull Moving Average) filter on or off to adjust signal sensitivity. When enabled, price must be above both the 5DMA and 20 HMA for confirmation. When disabled, only the 5DMA is required, generating more frequent signals. 3. Smart Reset Logic: The indicator includes intelligent reset functionality that prevents signal spam. Once an entry signal is generated, no new signals appear until price closes below the moving average(s), ensuring clean, actionable entries without clutter. 4. Visual Components: 5-Day Moving Average (Blue Line): The primary trend reference 20-Period Hull Moving Average (Orange Line): Fast-responding momentum filter Buy Signals (Green Labels): Clear "Buy" labels appear below candles when entry conditions are met Built-in Alerts: Set up custom alerts to be notified when entry signals trigger Customizable Inputs: Use HMA Filter: Enable/disable the 20 HMA confirmation requirement Include Green Wick Candle Signal: Toggle wick-based entry detection Use 5DMA Zero/Upslope Entry: Enable slope-based entry logic Use HMA Cross Entry: Enable HMA crossover signals HMA Length: Adjust the Hull Moving Average period (default: 20) Best Use Cases: Swing trading on daily and 4-hour timeframes Identifying pullback entries in uptrends Combining multiple confirmation signals for high-probability setups Filtering entries in momentum-based strategies Strategy Flexibility: This indicator allows you to use each entry method independently or combine multiple methods for confluence. Test different combinations to find what works best for your trading style and the instruments you trade. Risk Management Note: This indicator identifies potential entry points but does not provide exit signals or stop-loss levels. Always use proper risk management and combine with your own exit strategy.
Indicateur Pine Script®
par AlphaDan10
Gold AI RSI Monitor [Stacked + KNN]Here is a comprehensive description and user guide for the Gold AI RSI Monitor. You can copy and paste this into the "Description" field if you publish the script on TradingView, or save it for your own reference. Gold AI RSI Monitor 🚀 Overview The Gold AI RSI Monitor is a next-generation dashboard designed specifically for trading volatile assets like Gold (XAUUSD). It completely reimagines the traditional RSI by "stacking" 10 different timeframes (from 1-minute to Monthly) into a single, vertical view. Integrated into this dashboard is a K-Nearest Neighbors (KNN) Machine Learning algorithm. This AI analyzes historical price action to find patterns similar to the current market and predicts the next likely move with a confidence score. 📊 Visual Guide: How to Read the Chart 1. The "Stacked" Lanes Instead of switching timeframes constantly, this indicator displays them all at once using vertical offsets. Bottom Lane (0-100): 1-Minute RSI Middle Lanes: 5m, 15m, 30m, 1H, 2H, 4H, Daily Top Lane (900-1000): Monthly RSI 2. Gradient Color System The RSI lines change color based on momentum strength: 🔴 Red: Oversold / Bearish (Approaching 30 or lower) 🟡 Yellow: Neutral (Around 50) 🟢 Green: Overbought / Bullish (Approaching 70 or higher) 3. Tracker Lines Each timeframe has a dotted horizontal line extending to the right. This allows you to instantly see the exact RSI value for every timeframe without squinting. 🤖 The AI Engine (KNN) The "AI" component uses a K-Nearest Neighbors algorithm. Learning: It scans the last 1,000 bars of history. Matching: It finds the 5 historical moments that look mathematically identical to the current market conditions (based on RSI and Volatility). Predicting: It checks if price went UP or DOWN after those historical matches. The Signals: Buying Signal: If the majority of historical matches resulted in a price increase, the AI triggers a BUY. Selling Signal: If the majority resulted in a drop, the AI triggers a SELL. 🎯 How to Trade with This Indicator 1. The "Crosshair" Signal When the AI detects a high-probability setup, a massive Crosshair appears on your chart: Green Crosshair: Strong BUY signal. Red Crosshair: Strong SELL signal. Note: The crosshair consists of a thick vertical line and a dashed horizontal line intersecting at the signal candle. 2. Timeframe Alignment (Confluence) Do not rely on the AI alone. Look at the stacked RSIs: Strong Long: The AI shows a Green Crosshair AND the lower timeframes (1m, 5m, 15m) are all turning Green/upward. Strong Short: The AI shows a Red Crosshair AND the lower timeframes are turning Red/downward. 3. Support & Resistance Zones Bottom Dotted Line (30): Support. If RSI hits this and turns up, it's a buying opportunity. Top Dotted Line (70): Resistance. If RSI hits this and turns down, it's a selling opportunity. ⚙️ Settings Guide RSI Length: Default is 14. Lower (e.g., 7) makes it faster/choppier; higher (e.g., 21) makes it smoother. Enable AI Signals: Toggles the KNN calculation on/off. Neighbors (K): How many historical matches to check. Default is 5. Increase to 9-10 for fewer, more conservative signals. Decrease to 3 for faster, more aggressive signals. AI Timeframe: CRITICAL SETTING. If left empty, the AI calculates based on your current chart. Recommendation: For Gold scalping, set this to 15m or 1h. This ensures the AI looks at the bigger trend even if you are zooming in on the 1-minute chart. ⚠️ Disclaimer This tool is for educational and analytical purposes. The "AI" is a statistical probability algorithm based on past performance, which is not indicative of future results. Always manage your risk.
Indicateur Pine Script®
par Protrade888lv
MTF RSI Stacked + AI + Gradient MTF RSI Stacked + AI + Gradient Quick-start guide & best-practice rules What the indicator does Multi-Time-Frame RSI in one pane • 10 time-frames (1 m → 1 M) are stacked 100 points apart (0, 100, 200 … 900). • Each RSI is plotted with a smooth red-yellow-green gradient: – Red = RSI below 30 (oversold) – Yellow = RSI near 50 – Green = RSI above 70 (overbought) • Grey 30-70 bands are drawn for every TF so you can see extremities at a glance. Built-in AI (KNN) signal • On every close of the chosen AI-time-frame the script: – Takes the last 14-period RSI + normalised ATR as “features” – Compares them to the last N bars (default 1 000) – Votes of the k = 5 closest neighbours → BUY / SELL / NEUTRAL • Confidence % is shown in the badge (top-right). • A thick vertical line (green/red) is printed once when the signal flips. How to read it • Gradient colour tells you instantly which TFs are overbought/obove sold. • When all or most gradients are green → broad momentum up; look for shorts only on lower-TF pullbacks. • When most are red → broad momentum down; favour longs only on lower-TF bounces. • Use the AI signal as a confluence filter, not a stand-alone entry: – If AI = BUY and 3+ higher-TF RSIs just crossed > 50 → consider long. – If AI = SELL and 3+ higher-TF RSIs just crossed < 50 → consider short. • Divergences: price makes a higher high but 1 h/4 h RSI (gradient) makes a lower high → possible reversal. Settings you can tweak AI timeframe – leave empty = same as chart, or pick a higher TF (e.g. “15” or “60”) to slow the signal down. Training bars – 500-2 000 is the sweet spot; bigger = slower but more stable. K neighbours – 3-7; lower = more signals, higher = smoother. RSI length – 14 is standard; 9 gives earlier turns, 21 gives fewer false swings. Practical trading workflow Open the symbol on your execution TF (e.g. 5 m). Set AI timeframe to 3-5× execution TF (e.g. 15 m or 30 m) so the signal survives market noise. Wait for AI signal to align with gradient extremes on at least one higher TF. Enter on the first gradient reversal inside the 30-70 band on the execution TF. Place stop beyond the swing that caused the gradient flip; target next opposing 70/30 level on the same TF or trail with structure. Colour cheat-sheet Bright green → RSI ≥ 70 (overbought) Bright red → RSI ≤ 30 (oversold) Muted colours → RSI near 50 (neutral, momentum pause) That’s it—one pane, ten time-frames, colour-coded extremes and an AI confluence layer. Keep the chart clean, use price action for precise entries, and let the gradient tell you when the wind is at your back.
Indicateur Pine Script®
par Protrade888lv
The Alchemist's Trend [wjdtks255]📊 The Alchemist's Trend - Filtered Trading Guide This indicator, named The Alchemist's Trend, is a High-Confidence Trend-Following Strategy designed to maximize reliability. It generates a final entry signal only when the QQE (Quantitative Qualitative Estimation) momentum signal is validated by four robust filters: Long-Term Trend (MA200), Mid-Term Trend (HMA), Momentum Strength (CCI), and Higher Timeframe (HTF) Trend. 1. Indicator Mechanism and Core Components A. Chart Visualization and Trend Identification Trend Line (HMA): Appears as a Yellow or Purple Thick Line. It represents the direction of the current short/mid-term market trend. Candle colors follow this line. MA 200: Appears as a Dotted Line (color configurable in settings). It is the Long-Term Trend Line. Price above it suggests a long-term bullish view; below it, a long-term bearish view. Candle Background: Appears as Light Yellow or Purple. It matches the Trend Line direction, providing a visual cue of the trend's strength. B. The Four-Filter System For a confirmed entry signal ('L' or 'S') to fire, the following four conditions must all align in the same direction: QQE (Momentum Base): Generates the primary Long/Short crossover signal. MA & HMA (Trend Alignment): For Long Entries: Price must be above both the MA200 and the HMA Trend Line. For Short Entries: Price must be below both the MA200 and the HMA Trend Line. CCI (Momentum Strengthening): For Long Entries: CCI value must be above +50. (Confirms strong buying momentum) For Short Entries: CCI value must be below -50. (Confirms strong selling momentum) HTF (Higher Timeframe Trend): Checks if the price on the set higher timeframe (default 4H) is above its own Trend Line, confirming alignment with the broader market direction. 2. Trading Strategy and Usage Rules This indicator aims to maximize signal reliability over frequency. 🔔 Entry Rule Enter a trade only when the 'L' or 'S' label appears on the chart AND the Action panel on the dashboard displays LONG SIGNAL or SHORT SIGNAL. Long Entry (L): Condition: 'L' label appears (All Long conditions met). Verification: Confirm the Trend Line and candle color are in the yellow range. Short Entry (S): Condition: 'S' label appears (All Short conditions met). Verification: Confirm the Trend Line and candle color are in the purple range. 🛡️ Risk and Position Management Stop-Loss (SL): A common practice is to place the Stop-Loss below the low of the signal candle (for Long) or above the high of the signal candle (for Short), or beyond a recent significant support/resistance level. Exit Strategy (Three Options): Opposite Signal: Close the position immediately if the opposite signal ('S' during a Long, or 'L' during a Short) occurs. RSI Extremes: Consider taking partial profits if the RSI reaches 70 (for Long) or 30 (for Short), indicating potential exhaustion. Trend Line Crossover: Exit the position if the price breaks or crosses the Trend Line, causing the candle color to change. 🖥️ Dashboard Utilization Tips The dashboard provides contextual information to validate the signal: RSI: Signals occurring within the neutral 30-70 zone suggest a stronger developing trend. If near 70/30, consider the risk of reversal. Vol Status ('High'): If the volume status is 'High' when the signal fires, the signal's power is likely high, indicating a higher probability of significant movement. Day High/Low: Use these values as a secondary reference for setting initial Stop-Loss or Take-Profit targets.
Indicateur Pine Script®
par wjdtks255
4
REMS - Deep SynergyThis is a more flexible version of the REMS Synergy indicator. Like other indicators in the REMS family, it builds upon the foundations assessing the relationships between RSI, EMAs, MACDs, and Stochastic RSI across multiple timeframes. Designed to help traders identify less frequent, but high probability entries across 2 time frames. Uses 3 levels of confluence indicators for both long and short moves. Features 3 levels of confluence across 2 timeframes. All 3 levels allow filtering of any combination of REMS filters. Features more options and customization than previous REMS Synergy. Includes VWAP and 4 EMAs as optional visual representations. Includes 'Enhanced Candles' than can colour code candlesticks for better visual identification. (off by default) Originally designed with 5 minute and 2 minute timeframes in mind, and pairs well with REMS First Strike and/or REMS Snap Shot indicators. This version features no hard-coded inputs and allows for more freedom than previous version. With the added flexibility comes the ability for the indicator to be more easily stacked.
Indicateur Pine Script®
par KodiakMarket
SMAs (10,50,100,200) by BenderDescription: Multi-timeframe Simple Moving Average indicator displaying four popular SMAs (10, 50, 100, 200) commonly used for trend analysis and support/resistance levels. Each SMA is fully customizable with individual settings for period length, data source, timeframe, and color. Perfect for traders who want to view higher timeframe SMAs on lower timeframe charts or combine multiple timeframe analyses in one view. Key Features: Four independent SMAs with default periods of 10, 50, 100, and 200 Multi-timeframe capability - view daily SMAs on any chart timeframe Fully customizable: length, source (close, open, high, low, etc.), timeframe, and color Toggle each SMA on/off individually Clean, organized settings menu with grouped parameters Semi-transparent lines for better chart visibility
Indicateur Pine Script®
par valchak
Dark Vector ScalpingThe Dark Vector Scalping indicator is a high-frequency trend-following system designed specifically to capture rapid momentum shifts in the market. It combines a staircase-style breakout logic with volatility-adjusted trailing stops to define market direction. While the underlying math is robust enough for various asset classes, this specific configuration is optimized for scalping operations on 1-minute and 5-minute timeframes. It aims to filter out the "noise" common in lower timeframes while reacting quickly to genuine breakouts. Core Components 1. The Apex Engine (Staircase Logic) Unlike traditional moving averages that curve with price, this engine uses a "hard" breakout logic. It looks back at a specific number of bars (Sensitivity) to find the highest highs and lowest lows. Bullish Flip: Occurs when the price closes below the calculated low of the previous trend. Bearish Flip: Occurs when the price closes above the calculated high of the previous trend. Trailing Stop: Once a trend is established, a trailing stop line is drawn. This line only moves in the direction of the trend (up for bullish, down for bearish) and never retraces, acting as a ratchet to lock in paper profits. 2. Volatility Normalization To prevent getting stopped out by random market noise (scam wicks), the indicator calculates the Average True Range (ATR). It multiplies this volatility metric by a user-defined deviation factor to determine exactly how far the stop line should be from the current price action. 3. The Hull Moving Average (HMA) Filter The script includes an optional 50-period Hull Moving Average. The HMA is known for being extremely fast and smooth, reducing lag compared to standard moving averages. Visual Reference: You can plot the line to see the overall macro trend. Hard Filter: You can enable a "Safety Filter" in the settings. If enabled, the system will only generate Buy signals if the price is above the HMA, and Sell signals if the price is below the HMA. 4. The Dashboard A data panel is located on the chart (customizable position) to provide instant numerical data without needing to calculate levels manually. It displays the current trend state, the exact price of the trailing stop, and the status of the HMA filter. Settings & Configuration Sensitivity (Lookback) Default: 5 This is the primary setting for the Apex Engine. A setting of 5 is the "sweet spot" for 1-minute and 5-minute charts. It allows the system to react very quickly to sudden volume spikes. Increasing this number (e.g., to 10) will make the signals slower and more conservative. Stop Deviation Default: 3.0 This controls the "breathing room" for the trade. A value of 3.0 allows for standard volatility on minute charts without triggering a premature exit. Lowering this to 2.0 will result in tighter stops but more false signals. HMA Filter Use HMA as Filter? (Default: OFF): When OFF, the system signals purely on price action breakouts (fastest). When ON, the system waits for the price to align with the 50-period HMA before signaling (safest, but may delay entry). How to Interpret Visuals Candle Colors Teal/Green: The market is in a Bullish regime. Red/Pink: The market is in a Bearish regime. The Line The solid stepped line represents the hard invalidation point. If price closes beyond this line, the trend is considered over. Diamond Signals Light Green Diamond (Below Bar): Confirmed Buy Signal. A new bullish trend has started. Light Red/Pink Diamond (Above Bar): Confirmed Sell Signal. A new bearish trend has started. Trading Strategy Guide The Scalp Entry Ensure you are on a 1-minute or 5-minute timeframe. Wait for a signal Diamond to close. Do not enter while the bar is still forming, as the signal may repaint (disappear) if the price retraces before the close. Long Entry: Enter when a Green Diamond appears and the candle turns Teal. Short Entry: Enter when a Red Diamond appears and the candle turns Red. Risk Management Stop Loss: Your invalidation level is the "Apex Stop" line. You can place your hard stop loss slightly beyond this line. Take Profit: Because this is a trend-following system, it is often best to hold until the candle color changes, or to take profit at fixed Risk:Reward ratios (e.g., 1:1.5 or 1:2). The HMA Nuance If you find the market is "choppy" (moving sideways), enable the "Use HMA as Filter" option in the settings. This will force the system to ignore signals that are counter-trend to the longer-term momentum. Disclaimer The information provided by the "Dark Vector Scalping" indicator and this accompanying guide is for educational and informational purposes only. It does not constitute financial, investment, or trading advice. Trading cryptocurrencies, stocks, and forex involves a high level of risk and may not be suitable for all investors. You could lose some or all of your initial investment.
Indicateur Pine Script®
par DarkPoolCrypto
3
Multi-Factor Trend Confluence Indicator (PTP V4)Disclaimer: This is a technical analysis tool for educational and informational purposes only. It does not constitute investment advice, financial solicitation, or a recommendation to buy or sell any security or instrument. Trading involves significant risk, and past performance is not indicative of future results. Use at your own risk. KEY Features and Strategic Methodology This is a comprehensive trend and confluence indicator built on multiple factors to identify potential pullbacks within an established trend. • Core Trend Filter: Uses a long-term EMA to confirm the overall market bias. • Fibonacci Pullback Logic: Identifies potential low-risk entry zones by calculating a 61.8% Fibonacci Retracement over a user-defined lookback period. • Multi-Factor Confluence: A signal is generated only when the price touches the Fib zone AND the following factors align (You can edit the script to adjust the confluence conditions.): o RSI is above 50. o Positive DI is above Negative DI (DMI Bullish Crossover). o Price is above the fast EMA. • Consecutive Signal Counter: Includes a unique counter that highlights bars where the confluence conditions have been met for a minimum number of consecutive candles (4 by default), aiding in the validation of strong momentum entries. • Moving Average Visualization: Plots and color-fills 10 WMA, 21 EMA, 42 EMA, and 200 EMA to provide a full market context and visualize momentum shifts. 1. Short-Term Momentum (WMA10 vs. EMA42 Fill) This fill area highlights immediate price acceleration and momentum shifts: • Green Fill (Bullish Momentum): WMA10 > EMA42. • Red Fill (Bearish Momentum): WMA10 < EMA42. 2. Long-Term Market Context (EMA200 vs. EMA42 Fill) This fill area defines the dominant backdrop of the market, essential for strategic positioning: • Green Fill (Bullish Context): EMA200 < EMA42. • Red Fill (Bearish Context): EMA200 > EMA42. EMA200 Line Coloration The EMA200 line color itself also provides a visual cue for the long-term context: • Red Line: When EMA200 > EMA42 (Bearish Context). • Green Line: When EMA200 < EMA42 (Bullish Context). Customization The indicator is highly customizable via the settings menu, allowing users to adjust lengths for EMA, RSI, DMI, Pivot Points, and the specific parameters for the Fibonacci Retracement Strategy (tolerance and candle limits).
Indicateur Pine Script®
par pablo.corti
2
EMA 9/20/50/100/200This script plots the five most commonly used Exponential Moving Averages (EMAs): 9, 20, 50, 100, and 200. These EMAs help traders quickly identify short-term momentum, medium-term trends, and long-term market direction. It is useful for: Trend identification Momentum confirmation Pullback entries Reversal detection Multi-timeframe confluence trading What’s Included EMA 9 → short-term momentum EMA 20 → near-term trend guide EMA 50 → medium-term trend EMA 100 → broad trend structure EMA 200 → long-term direction Each EMA is color-coded for clarity, making it easy to read and visually track trend shifts. How to Use When shorter EMAs cross above longer EMAs → bullish trend strengthening When shorter EMAs cross below longer EMAs → bearish trend strengthening Wide spacing between EMAs indicates a strong trend Compression or clustering often signals potential reversals or breakout conditions This indicator is simple, clean, and effective for all timeframes and asset classes.
Indicateur Pine Script®
par KettleCooked
Vegas & DSLVegas & DSL is a trend identification indicator that combines a trend moving average structure with Dynamic State Logic (DSL). Based on the classic Vegas channel, it uses EMA13, EMA21, EMA144, and EMA169 to depict the short-to-medium-term and medium-to-long-term trend framework of the market. It also introduces high and low bands based on HMA (Hull Moving Average) to determine the strength or weakness of prices within a certain period. The core of the indicator is the DSL state machine system: by detecting when the price continuously stays above the high or low band across several candlesticks, it generates a stable bullish or bearish state. When a bullish state is established, the system marks LP (low point support), representing sustained price strength; when a bearish state is established, it marks HP (high point resistance), reflecting the dominant downward trend. Because the states are "persistent," they do not frequently reverse due to short-term disturbances, making the trend signals smoother and more reliable. Vegas Structure is responsible for depicting trend channels, while DSL is responsible for trend confirmation. The combination of the two can capture the start of a trend and filter out noise, making it a trend tracking and structure positioning tool suitable for both short-term and long-term trading.
Indicateur Pine Script®
par TYQUANT
3-Daumen-RegelThis indicator evaluates three key market conditions and summarizes them in a compact table using simple thumbs-up / thumbs-down signals. It’s designed specifically for daily timeframes and helps you quickly assess whether a market is showing technical strength or weakness. The Three Checks Price Above the 200-Day SMA Indicates the long-term trend direction. A thumbs-up means the price is trading above the 200-day moving average. Positive Performance During the First 5 Trading Days of the Year (YTD Start) Measures early-year strength. If not enough bars are available, a warning is shown. Price Above the YTD Level Compares the current price to the first trading day’s close of the year. Color Coding for Instant Clarity Green: Condition met Red: Condition not met This creates a compact “thumbs check” that gives you a quick read on the market’s technical health. Note The indicator is intended for daily charts. A message appears if a different timeframe is used.
Indicateur Pine Script®
par Yazici-Investment-Management
AlphaTrend++ offset labelsAlphaTrend++ Overview The AlphaTrend++ is an advanced Pine Script indicator designed to help traders identify buy and sell opportunities in trending and volatile markets. Building on trend-following principles, it uses a modified Average True Range (ATR) calculation combined with volume or momentum data to plot a dynamic trend line. The indicator overlays on the price chart, displaying a colored trend line, a filled trend zone, buy/sell signals, and optional stop-loss tick labels, making it ideal for day trading or swing trading, particularly in markets like futures (e.g., MES). What It Does This indicator generates buy and sell signals based on the direction and momentum of a custom trend line, filtered by optional time restrictions and signal frequency logic. The trend line adapts to price action and volatility, with a filled zone highlighting trend strength. Buy/sell signals are plotted as labels, and stop-loss distances are displayed in ticks (customizable for instruments like MES). The indicator supports standard chart types for realistic signal generation. How It Works The indicator employs the following components: Trend Line Calculation: A dynamic trend line is calculated using ATR adjusted by a user-defined multiplier, combined with either Money Flow Index (MFI) or Relative Strength Index (RSI) depending on volume availability. The line tracks price movements, adjusting upward or downward based on trend direction and volatility. Trend Zone: The area between the current trend line and its value two bars prior is filled, colored green for bullish trends (upward movement) or red for bearish trends (downward movement), providing a visual cue of trend strength. Signal Generation: Buy signals occur when the trend line crosses above its value two bars ago, and sell signals occur when it crosses below, with optional filtering to reduce signal noise (based on bar timing logic). Signals can be restricted to a 9:00–15:00 UTC trading window. Stop-Loss Ticks: For each signal, the indicator calculates the distance to the trend line (acting as a stop-loss level) in ticks, using a user-defined tick size (default 0.25 for MES). These are displayed as labels below/above the signal. Time Filter: An optional filter limits signals to 9:00–15:00 UTC, aligning with active trading sessions like the US market open. The indicator ensures compatibility with standard chart types (e.g., candlestick or bar charts) to avoid unrealistic results associated with non-standard types like Heikin Ashi or Renko. How to Use It Add to Chart: Apply the indicator to a candlestick or bar chart on TradingView. Configure Settings: Multiplier: Adjust the ATR multiplier (default 1.0) to control trend line sensitivity. Higher values widen the stop-loss distance. Common Period: Set the ATR and MFI/RSI period (default 14) for trend calculations. No Volume Data: Enable if volume data is unavailable (e.g., for certain forex pairs), switching from MFI to RSI. Tick Size: Set the tick size for stop-loss calculations (default 0.25 for MES futures). Show Buy/Sell Signals: Toggle signal labels (default enabled). Show Stop Loss Ticks: Toggle stop-loss tick labels (default enabled). Use Time Filter: Restrict signals to 9:00–15:00 UTC (default disabled). Use Filtered Signals: Enable to reduce signal frequency using bar timing logic (default enabled). Interpret Signals: Buy Signal: A blue “BUY” label below the bar indicates a potential long entry (trend line crossover, passing filters). Sell Signal: A red “SELL” label above the bar indicates a potential short entry (trend line crossunder, passing filters). Trend Zone: Green fill suggests bullish momentum; red fill suggests bearish momentum. Stop-Loss Ticks: Gray labels show the stop-loss distance in ticks, helping with risk management. Monitor Context: Use the trend line and filled zone to confirm the market’s direction before acting on signals. Unique Features Adaptive Trend Line: Combines ATR with MFI or RSI to create a responsive trend line that adjusts to volatility and market conditions. Tick-Based Stop-Loss: Displays stop-loss distances in ticks, customizable for specific instruments, aiding precise risk management. Signal Filtering: Optional bar timing logic reduces false signals, improving reliability in choppy markets. Trend Zone Visualization: The filled zone between trend line values enhances trend clarity, making it easier to assess momentum. Time-Restricted Trading: Optional 9:00–15:00 UTC filter aligns signals with high-liquidity sessions. Notes Use on standard candlestick or bar charts to ensure accurate signals. Test the indicator on a demo account to optimize settings for your market and timeframe. Combine with other analysis (e.g., support/resistance, volume spikes) for better decision-making. The indicator is not a standalone system; use it as part of a broader trading strategy. Limitations Signals may lag in highly volatile or low-liquidity markets due to ATR-based calculations. The 9:00–15:00 UTC time filter may not suit all markets; disable it for 24-hour assets like forex or crypto. Stop-loss tick calculations assume consistent tick sizes; verify compatibility with your instrument. This indicator is designed for traders seeking a robust, trend-following tool with customizable risk management and signal filtering, optimized for active trading sessions. This update enhances label customization, clarity, and signal usability while preserving all existing AlphaTrend++ logic. The goal is to improve readability during live trading and allow traders to personalize the visual footprint of entries and stop-loss levels. Improvements • Cleaner Label Placement Labels now maintain consistent spacing from the candle, regardless of volatility or ATR expansion. • Enhanced Visual Structure BUY/SELL signals remain bold and clear, while SL ticks use a more compact and optional sizing scheme. • Better User Control New UI inputs: Entry Label Size SL Label Size SL Label Offset (Ticks)nces.
Indicateur Pine Script®
par charleyRT
GENESIS DHANUS A clean, non-repainting trend-following signal indicator. Buy signals appear when: • Fast EMA (9) crosses above Slow EMA (21) • RSI > 50 (bullish momentum) • Previous bar volume > 1.5× 20-period average • Price is above the current Heikin-Ashi "trend level" Sell signals use the exact opposite conditions. All conditions use confirmed data only (no future leak, no repainting). Perfect for swing trading and alert setups on any timeframe. Features: - Large clear arrows with text - Optional light background coloring - Precise alert conditions - EMA lines can be toggled 100% Pine Script v5 – open source and free.
Indicateur Pine Script®
par Rappleh