Adaptive Strength Overlay (MTF) [BackQuant]Adaptive Strength Overlay (MTF)
A multi-timeframe RSI strength visualizer that projects oscillator “pressure” directly onto price using adaptive gradient fills between percent bands. Built to make strength, exhaustion, and regime context readable at a glance, without needing to stare at a separate oscillator panel.
Mean-Reversion mode example
What this indicator does
This indicator converts RSI strength into a chart overlay that reacts to momentum and extremes, then visualizes it as colored “pressure zones” around price.
Instead of plotting RSI in a sub-window, it:
Builds 1 to 3 symmetric percent bands above and below price.
Computes RSI strength on up to 3 different timeframes (MTF).
Smooths RSI with your selected moving average type.
Maps RSI values into discrete transparency “buckets”.
Fills between the bands with a gradient whose opacity reflects strength or exhaustion.
Displays a compact RSI table for all enabled timeframes.
Provides alert conditions for extremes and midline shifts on each timeframe.
The result is an overlay that looks like a dynamic envelope. When strength rises, the envelope “lights up” in the direction of the move. When strength becomes stretched, the outer zones become visually prominent.
Core idea: “Strength as an overlay”
RSI is normally interpreted in a separate oscillator panel. That makes context-switching slow:
You check price action.
You look down at RSI.
You mentally translate RSI into risk or trend bias.
This script removes that translation step by projecting strength directly onto the price area, using band fills as a visual language:
More visible fill = stronger strength or more extreme condition (depending on mode).
Less visible fill = weak strength or neutral state.
Two operating modes
1) Trend mode
Trend mode emphasizes strength aligned with direction:
When RSI is strong on the upside, upper bands become more visible.
When RSI is strong on the downside, lower bands become more visible.
Neutral RSI fades, so the chart de-clutters during chop.
Use Trend mode when:
You want a clean trend-following overlay.
You want to quickly see which timeframe(s) are powering the move.
You want to filter entries to moments when strength confirms direction.
2) Mean-Reversion mode
Mean-Reversion mode flips the emphasis to highlight exhaustion against the move :
Upper extremes become a “potential exhaustion” cue.
Lower extremes become a “potential exhaustion” cue.
The overlay is tuned to make stretched conditions obvious.
This is not an automatic “short overbought / long oversold” system. It is a visualization mode that makes “extended” conditions stand out faster, especially when multiple timeframes align.
How the bands work (Percent Bands)
The indicator constructs up to three symmetric envelopes around price:
Band 1: percent1 scaled by scale
Band 2: percent2 scaled by scale (optional)
Band 3: percent3 scaled by scale (optional)
The percent bands are simple deviations from the selected price source:
Upper = price * (1 + (percent * scaling)/100)
Lower = price * (1 - (percent * scaling)/100)
Why this matters:
It anchors “strength visualization” to meaningful price distance.
It makes the overlay comparable across assets because it’s percent-based.
It gives you a consistent spatial frame for reading momentum versus extension.
Multi-timeframe engine (MTF)
The script runs the same strength calculation on up to three timeframes:
Timeframe 1 uses the chart timeframe by default (empty string input).
Timeframe 2 is optional and defaults to Daily.
Timeframe 3 is optional and defaults to Weekly.
Each timeframe has:
Its own RSI period (len, len2, len3).
Its own smoothing length (slen, slen2, slen3).
The same smoothing type selection (EMA, HMA, etc).
This creates a layered view:
TF1 often reflects tactical pressure (entries/exits).
TF2 reflects structural pressure (swing context).
TF3 reflects macro bias (regime context).
When multiple timeframes agree, the fills stack and the overlay becomes visually louder. When they disagree, the overlay looks mixed or muted, which is exactly the point.
Smoothing options (why so many)
Raw RSI can be noisy. This script lets you smooth RSI with multiple MA types, which changes how “responsive” the overlay feels:
EMA/RMA smooth without lagging as hard as SMA.
HMA responds faster but can be twitchy.
LINREG can feel more “structural”.
ALMA and T3/TEMA provide heavier smoothing profiles with different lag characteristics.
This isn’t cosmetic. Your smoothing choice affects:
How early the overlay “lights up” in Trend mode.
How long extremes remain highlighted in Mean-Reversion mode.
How often fills flicker in chop.
Strength mapping (the transparency buckets)
Instead of mapping RSI to a continuous color scale, the script uses a discrete transparency ladder. That creates a clean, readable visual that avoids constant flickering.
The logic assigns two transparency values per timeframe:
Upper-side transparency responds to lower RSI zones (weak upside strength).
Lower-side transparency responds to higher RSI zones (strong upside strength).
Then the script uses those transparencies differently depending on mode:
Trend mode shows “strength aligned with direction”.
Mean-Reversion mode swaps the emphasis so “extremes” stand out as potential stretch.
You can think of it as:
Trend mode highlights continuation strength.
Mean-Reversion mode highlights potential exhaustion.
Fill stacking (how the overlay is built)
The overlay uses layered fills:
Fill from price to Band 1
Fill from Band 1 to Band 2 (if enabled)
Fill from Band 2 to Band 3 (if enabled)
Upper side uses the negative color (typically red) and lower side uses the positive color (typically green), because upper bands represent “above price” space and lower bands represent “below price” space. The intensity is controlled by the computed transparency per timeframe and selected mode.
Important behavior:
Disabling Band 2 or Band 3 can change how the stacked fills look, because you are removing fill segments.
If you want a clean look, run only Band 1.
If you want a “regime heat” look, run Bands 1–3 with higher scaling.
Table (MTF RSI dashboard)
A compact table prints RSI values for each configured timeframe:
Row labels show TF.
Values show the smoothed RSI output that drives the overlay.
Use it for quick confirmation:
If overlay looks strong but table RSI is neutral, your band settings might be too tight.
If TF3 RSI is extreme while TF1 is neutral, you are likely in a macro stretched regime with local consolidation.
Alerts (built-in)
Alerts are provided for each timeframe separately, covering:
Entering upper extreme (cross above 70)
Exiting upper extreme (cross below 70)
Entering lower extreme (cross below 30)
Exiting lower extreme (cross above 30)
Bullish midline cross (cross above 50)
Bearish midline cross (cross below 50)
This enables workflows like:
Notify when TF2 enters extreme, then wait for TF1 mean-reversion confirmation.
Notify when TF3 crosses midline, then only take TF1 trend setups in that direction.
How to use it (practical reads)
Trend mode reads
Strong continuation: TF1 and TF2 fills become clearly visible on the same side.
Healthy pullback: TF1 fades but TF2 stays visible, suggesting underlying structure remains strong.
Chop warning: fills alternate or remain mostly invisible, indicating neutral strength.
Mean-Reversion mode reads
Exhaustion zones: outer fills become prominent near the extremes, signaling stretched conditions.
Compression after extreme: fill fades while price stabilizes, suggesting “cooling off” rather than immediate reversal.
Multi-TF stretch: TF2 and TF3 extremes together often mark higher significance zones.
Recommended setup presets
Preset A: Clean trend overlay
Mode: Trend
Bands: only Band 1
Scale: 1–2
Smoothing: EMA, moderate slen (6–10)
TF2: Daily on intraday charts
Preset B: Regime and exhaustion mapper
Mode: Mean-Reversion
Bands: Bands 1–3
Scale: 2–4
Smoothing: T3 or RMA, slightly higher slen
TF2: Daily, TF3: Weekly
Limitations
This is a strength visualization tool, not a full entry/exit system.
Percent bands are not volatility-adjusted, they are distance frames. In very high vol conditions, you may need higher band percentages or higher scaling.
MTF values update on their own timeframe closes, so higher timeframes will step rather than update every bar.
Indicateurs et stratégies
SB - HULL MANifty Options Scalping @ 1 Minute TF
Call Entry - If both MA turns bullish.
Put Entry - If Both MAs turns bearish.
Best results - If both MAs complement each other in the same direction.
Exit Plan - My opinion, If slow MA turns bearish. However one can also plan to exit if any one of the MA turns bearish.
Display - Make your own setting as per your own comfort
Keep this indicator in a separate pane below the chart. It will give clarity view of the chart.
Works well on nifty derivatives @ 1 minute TF , can do well on other instruments too.
SB - HULL MANifty Derivatives Scalping @ 1 Minute TF
Call Side - If both the MAs turns bullish
Put Side - If both the MAs turns bearish.
Can be applied on options charts directly. Better to plan 50 points in the money Call or Put option from Spot.
Exit - My opinion, if slow MA turns bearish. You can either exit if anyone of the MA turns bearish also.
Best for nifty derivatives scalping at 1 Minute TF, can work well on other instruments too.
Display Setting - As per your own convenience, Mine snap is below :
Nexus Flow ProNexus Flow Pro is a trading tool that combines "deep trend insight" with "precise trading signals." It navigates trending waves and accurately displays reversal signals; it is one of the most logically sound and visually appealing oscillator indicators.
This indicator employs a "dual-engine" logic, isolating and layering market trends:
Primary Engine: Based on an enhanced T3 smoothing algorithm, it captures the market's medium- to long-term trends. Visually, it serves as the background of the main chart, providing clear trend guidance.
Secondary Engine: Responsible for fine-grained momentum filtering and crossover point identification. It displays intensely contested price points in a more compact and lightweight manner, combining this with the main trend guidance to identify correct trading opportunities.
Each dot represents a different voice in the market, used to observe market dynamics and identify genuine trading opportunities.
Use 【Advanced Dynamic RSI Pro】 to determine market depth and avoid making the wrong entry point.
Easy Risk Calculator with FeesThis Pine Script creates a position sizing calculator for TradingView that helps traders understand the true cost and risk of a trade when accounting for exchange fees. Here's what it does:
Core Purpose
The script calculates the actual position size, costs, and risk for a trade based on a minimum position value in USDT, while factoring in trading fees that affect both entry and exit prices.
Key Calculations
Position Size Determination:
Takes a desired position value in USDT and adjusts for fees
For longs: divides by entry price × (1 + fee) since you pay fees when buying
For shorts: divides by entry price × (1 - fee) since you receive less when shorting
Risk Analysis:
Calculates the reverse risk - determining how much you'd actually lose based on your position size, rather than starting with a target risk amount
Computes effective entry/exit values - the true USDT value after accounting for fees on both sides of the trade
Expected loss shows the actual dollar amount you'd lose if your stop loss is hit
Risk deviation reveals the percentage difference between your expected loss and calculated risk amount
Visual Output
The script displays a table on the chart showing:
Trade direction (LONG/SHORT with color coding)
Entry price and stop loss levels
Fee percentage used
Position size in both USDT and units of the asset
Effective entry and exit values (after fees)
Expected loss if stopped out
Deviation from target risk
Calculated risk amount in USDT
This tool is particularly useful for traders who need to work with minimum position sizes on exchanges and want to understand exactly how fees impact their actual risk exposure.Claude is AI and can make mistakes. Please double-check responses. Sonnet 4.5Claude is AI and can make mistakes. Please double-check responses.
Mean Reversion buysSimple mean reversions tool to signal potential outsized buying opportunities. Confluence between three different basic models; RSI, MACD, and Mean reversion. Not much complexity around it trying to maximize noise for options.
Area per IntervalDescription
This indicator shades the area between 2 curves, an SMA and the nearest open/close to the SMA, and their intersections. The black labels with leader lines describe the calculated area of each shaded section, and the total area accumulated per total number of time intervals for that area. The additional value visible in the status line that is not displayed on the chart is, at any bar index (time interval), the current total area of the incomplete shaded area.
Usage
- The default color of the shaded areas denote the type of momentum being built before the cross. Green for bullish, red for bearish.
- The area value of the shaded areas can be used as a capacity indicator, denoting imbalances between the previous and next crosses.
- The area per interval value of the shaded areas can be used as a momentum indicator, denoting which area is carrying more price movement before the price crosses.
- Similar to indicators that use dynamic price differences between OHLC data, moving averages, etc, confluence with other momentum indicators that use different elements creates additional confirmation.
Conclusion
Simple momentum indicator. Comment for possible updates that can be made.
SB - VWDEMA - V2Derivatives - Scalping @ 1 Minute TF
Rules : -
CE entry - If ATR a& Dema both turns Green.
PE entry - If ATR and Dema both turns Red.
If both are in opposite colour code, wait till both align in direction and colour coding.
Vwap - If price is above Vwap, Calls will be rewarded well ( Try to find out entry in call options ).
If Price is below VWAP, Puts will be rewarded well also, try to figure out entry in Put options.
Best results - Nifty derivative @ 1 minute TF , However can work well in all other instruments.
Display - make your own settings as per your convenience. Mine is attached below for your reference :
SB - VWDEMAScalping @ 1 Minute time frame.
Rules : -
1. Call entry - If Dema and ATR both turns green ( 1 minute TF )
2. Put Entry - If Dema and ATR both turns red ( 1minute TF )
If one is red and other is green wait till both align in same direction.
Vwap - Price above VWAP, call side entry will be rewarded well ( Try to find entry in calls) and if price is below Vwap Put side entry will be rewarded well ( Try to find entry in Puts).
Exit - Follow ATR stop loss line at 1 minute TF ( candle closing basis ).
Can be used on option charts directly.
Best results - Nifty derivatives @ 1 Minute TF, however it can work well with other instruments too.
Make your display setting as per your convenience.
777 confluencehi, very awsome very nice indicator for people who dont know how to trade like myself :)
Classic Chartism-Market Structure- Support.ResistanceClassic Chartism – Market Structure + Support & Resistance
This indicator is designed for traditional chart-based technical analysis, relying exclusively on price action and market structure, without the use of oscillators or lagging indicators.
The script automatically detects significant swing highs and swing lows using confirmed pivots and classifies price structure according to classic market structure notation:
HH (Higher High)
HL (Higher Low)
LH (Lower High)
LL (Lower Low)
Based on these swings, the indicator plots horizontal Support & Resistance (SR) levels, representing historically significant areas of supply and demand. These levels remain active until invalidated by price, providing a clear and objective market context.
The indicator does not repaint once a swing is confirmed, making it suitable for real-time analysis and discretionary trading decisions. It performs well across cryptocurrencies, futures, indices, and equities, and is particularly useful for trend identification, pullback entries, and structure-based risk management.
Bot Scalping XAUUSD(Volatilidad + TP Parcial + Modo Intermedio)Probar un nuevo bot.
En oro dando entradas para scalping con TP, SL Y BE
Gold Bullish Order Blocks - 3 Candle Confirmation after the OBBest Order blocks finder created by Marky using claude AI.
ICT IRON-CLAD: Fixed Sessionsall sessions and killzones marked out with colours and lables as used by all traders
777 SigmaDev Clustersyeeeeeeeeeeeeeeeeeeeeeeeeeeaaaaaaaaaaaaaaaaaaaaaah buddyyyyyyyyyyyyyyyyyyyyyyyyyyyy!
777 expected Movehell yeaaaaaaaaaaaah, we back at it again yfm, some bs right here, will NOT tap ever!!!!!!
ICT Master: Type-Safe Sessions & FVGsasia, london , new york session and killzones used by ict and other top traders
ICT Visible Center-Label CISD & FVGsThis indicator provides a clean, institutional-grade view of market shifts and liquidity gaps, specifically optimized for ICT (Inner Circle Trader) concepts.
Core Components
CISD (+/-): Identifies a "Change in State of Delivery." A (+) indicates a bullish shift, while a (-) indicates a bearish shift. These appear as fixed black lines with labels that delete automatically once price breaches the level.
Multi-Timeframe FVGs: Automatically plots Fair Value Gaps from the 5m, 15m, 1H, and 4H timeframes simultaneously.
Center-Locked Labels: Timeframe labels (e.g., "1H") are centered within the gaps, making them easy to identify without scrolling back through price history.
Auto-Cleaning Logic: To keep your chart clutter-free, gaps and CISD levels are instantly removed from the screen the moment they are mitigated (filled) by price.
Mashrab | Momentum X-RayStop guessing if a stock is strong or weak. The Momentum X-Ray is a professional Heads-Up Display (HUD) that tells you the truth about a stock in seconds.
Most indicators just look at price. This dashboard looks at the Context:
Relative Strength (The "King of the Hill" Check):
It doesn't just compare stocks to the S&P 500.
It automatically detects the stock's specific industry (e.g., Semiconductors, Regional Banks, Gold Miners) and compares it against its actual peers.
Green = The stock is a Leader (Beating its sector).
Red = The stock is a Laggard (Losing to its sector).
Fundamental Health (The "Engine" Check):
Instantly see Revenue Growth (QoQ and YoY) and Net Profit Margins.
Filters out "junk" stocks that are moving up on hype but have no real business growth.
Volatility Scanner:
Calculates the ADR (Average Daily Range) to help you size your positions correctly.
How to Read the Signals:
Top Table (Momentum): Look for Double Green. If a stock is beating the SPY and its Sector, it is an "Alpha Leader."
Bottom Table (Context): Check the "Industry" row to see exactly which ETF the script is using for comparison (e.g., SMH for Chips, KRE for Banks).
Algonova TrendFlowWhat was previously a (very!) manual process of looking at "UPs" and "DOWNs" to determine which way the market is "flowing" has now been automated! Urban TrendFlow is an immense timesaver for our users as we search for opportunities to go long and short (and especially when we need to sit on our hands and let uncertain markets "find their flow".
ICT Clean CISD & Mitigated MTF FVGs Clean CISD & MTF FVGs
Minimalist Institutional Order Flow Tool
Key Features:
CISD (Change in State of Delivery): Marks the first sign of an order flow shift. Displayed as a clean black line + label (no bulky boxes).
High-Probability FVGs: Scans 15m, 1h, and 4h timeframes for gaps.
Displacement Filter: Only shows "Crucial" gaps. Tiny, insignificant imbalances are automatically filtered out using an ATR threshold.
Auto-Cleaning Logic: Boxes are automatically deleted once price fills or closes through them, keeping your chart 100% clean.
Trade with TreandThink of this script as a filter and a signal light for trading Gold. It helps you avoid trading in the wrong direction and tells you exactly when the price momentum is shifting.
The Three Main Parts
The Ultimate Trend (The Filter):
This is the big table in the top-right corner.
Bullish (Green): Only look for BUY signals.
Bearish (Red): Only look for SELL signals.
It uses a "300 SMA" (a long-term average) to make sure you aren't "swimming against the tide."
The Entry Signals (The Crossover):
The script watches two lines on your chart (a 20-period and a 10-period).
When they cross, it places a BUY or SELL label on your screen.
The 4 Alerts (The Notifications):
You don't have to stare at the screen all day.
You get a notification for Buy entries, Sell entries, or when the Main Trend flips from Bullish to Bearish (or vice versa).
Simple Rules for Trading
To be successful with this script, follow these four rules:
Rule 1: Check the Table. If it says "Bearish," ignore all "BUY" labels.
Rule 2: Wait for the Label. Only enter a trade when a "BUY" or "SELL" label appears and it matches the trend table.
Rule 3: Protect Your Money. Look at the last 5 candles. Put your Stop Loss just past the highest or lowest point of those candles.
Rule 4: Aim for the Target. Your profit target should be at least double the amount of money you are risking (Risk:Reward 1:2).
How to use the Settings
When you click the Settings icon on the script, you can change:
SMA Filter: Change the "300" if you want the trend to be faster or slower.
Trend Gap: Adjust how far the trailing line stays away from the price.
Wick Connection Alerts (12M/6M/3M/1M)If you want touch/overlap, pick: Any Range Overlap (High-Low)
If you want wick-to-wick specifically, pick: Wick-to-Wick Zones (now with fewer false signals)
