Commencez

Indicateurs et stratégies

Volume Profile Visible Range (VPVR) with POC PriceThis script visualizes volume distribution for the bars currently visible on your chart, helping you identify key liquidity zones and high-traffic price levels. Main Features: ・Dynamic Range: Recalculates automatically as you zoom or scroll. ・POC Price Label: Highlights the Point of Control (highest volume) with a clear price tag. ・Value Area (VA): Visually separates the most active trading zone (default 70%). ・Highly Flexible: Choose your preferred layout (Left or Right) and colors. How to use: 1. Spot S/R Levels: Look for long bars (High Volume Nodes); these often act as strong support or resistance. 2. Monitor the POC: The Point of Control is a price magnet. Watch for reactions or retests at this level. 3. Low Volume Gaps: Price tends to move quickly through areas with very short volume bars.
Indicateur Pine Script®
par ken5_5489
4 EMA Perfect Order + Strength + MTFリリースノート 🇯🇵 日本語説明文 📌 スクリプト概要 このスクリプトは、EMA10・20・40・80 を使用して「パーフェクトオーダー（PO）」を判定し、 PO が確定したタイミングで矢印とアラートを表示します。 さらに、PO の強さ（短期と長期 EMA の乖離率）を数値化して表示し、 上位足（MTF）でも同様の判定と強さ表示が可能です。 🔧 機能一覧 • EMA10/20/40/80 のライン表示（黒・赤・オレンジ・青） • パーフェクトオーダー（Bull/Bear）の自動判定 • PO 確定時に矢印（▲/▼）を表示 • PO の強さ（乖離率）をリアルタイム表示 • 上位足（MTF）での PO 判定と強さ表示 • アラート条件付き（Bull/Bear PO 確定時） • 背景は白で視認性を重視 📈 パーフェクトオーダーとは？ • Bull PO（上昇トレンド） EMA10 > EMA20 > EMA40 > EMA80 • Bear PO（下降トレンド） EMA10 < EMA20 < EMA40 < EMA80 PO が確定したバーで矢印とアラートが発生します。 🧠 活用例 • PO の強さを使ってトレンドの勢いを測定 • 上位足の PO と一致しているか確認して精度を向上 • トレンドフォロー戦略のフィルターとして利用 • EMA の並びが崩れたら背景色を塗るなどの拡張も可能 🇺🇸 English Description 📌 Overview This script detects “Perfect Order” (PO) conditions using EMA10, EMA20, EMA40, and EMA80. When a PO is confirmed, it displays arrows and triggers alerts. It also calculates the strength of the PO (based on EMA divergence) and supports multi‑timeframe (MTF) analysis. 🔧 Features • Displays EMA10/20/40/80 with color coding (black, red, orange, blue) • Detects Bull and Bear Perfect Order conditions • Shows arrows (▲/▼) when PO is confirmed • Displays PO strength as a percentage (EMA10 vs EMA80 divergence) • Supports MTF PO detection and strength display • Includes alert conditions for Bull/Bear PO confirmation • Clean white background for better visibility 📈 What is a Perfect Order? • Bull PO (Uptrend): EMA10 > EMA20 > EMA40 > EMA80 • Bear PO (Downtrend): EMA10 < EMA20 < EMA40 < EMA80 Arrows and alerts are triggered only when the PO condition is newly confirmed. 🧠 Use Cases • Measure trend momentum using PO strength • Confirm alignment with higher timeframe trends • Use as a trend‑following filter • Can be extended with background coloring or histogram strength display
Indicateur Pine Script®
par cupship
Crash Prevention OpenSource by exp3rtsOpen Source Version - no updates! Crash Prevention OpenSource by exp3rts – Automated Exit Strategy for TradingView This indicator allows you to automatically close positions based on dynamic price levels derived from the previous candle with a configurable offset. Perfect for risk management and automated “hard stop” exits. Key Features: Flexible Exit Directions: Choose to trigger exits for Long, Short, or Both directions. Dynamic Exit Levels: Lines are automatically calculated above/below the previous candle plus/minus a user-defined offset in points. Visual Cues: Clear arrows indicate the exact bar where price touched the exit line. Session-Independent: Works on any chart and timeframe without manual adjustments. Webhook Alerts: Sends JSON alerts on touch, enabling integration with external systems or bots. Auto-Close Logic: Ensures positions are closed immediately when the threshold is breached, keeping trades in check. How it works: For Long exits, the line is drawn below the previous bar’s low minus the offset. For Short exits, the line is drawn above the previous bar’s high plus the offset. When price crosses the line, the position is closed, an arrow is plotted on the chart, and an alert is fired. Ideal for traders who want strict stop management or automated exit conditions while keeping visual clarity on the chart.
Indicateur Pine Script®
par exp3rts
Cloud Gold TrendTrend Filter (Ichimoku): If the price is above the cloud (Kumo), look only for "Long" signals. If it is below, look only for "Short" signals. Entry Signal (Bollinger): When the price touches the Lower Band while you are above the Cloud, it could be a great buying point in an uptrend. Volatility Confirmation: If the Bollinger Bands squeeze within the cloud, get ready for a strong directional move as soon as the price breaks one of the two levels.
Indicateur Pine Script®
par Aplanet33
Cumulative Volume Delta (CVD) Suite [QuantAlgo]🟢 Overview The Cumulative Volume Delta (CVD) Suite is a comprehensive toolkit that tracks the net difference between buying and selling pressure over time, helping traders identify significant accumulation/distribution patterns, spot divergences with price action, and confirm trend strength. By visualizing the running balance of volume flow, this indicator reveals underlying market sentiment that often precedes significant price movements. 🟢 How It Works The indicator begins by determining the optimal timeframe for delta calculation. When auto-select is enabled, it automatically chooses a lower timeframe based on your chart period, e.g., using 1-second bars for minute charts, 5-second bars for 5-minute charts, and progressively larger intervals for higher timeframes. This granular approach captures volume flow dynamics that might be missed at the chart level. Once the timeframe is established, the indicator calculates volume delta for each bar using directional classification: getDelta() => close > open ? volume : close < open ? -volume : 0 When a bar closes higher than it opens (bullish candle), the entire volume is counted as positive delta representing buying pressure. Conversely, when a bar closes lower than its open (bearish candle), volume becomes negative delta representing selling pressure. This classification is applied to every bar in the selected lower timeframe, then aggregated upward to construct the delta for each chart bar: array deltaValues = request.security_lower_tf(syminfo.tickerid, lowerTimeframe, getDelta()) float barDelta = 0.0 if array.size(deltaValues) > 0 for i = 0 to array.size(deltaValues) - 1 barDelta := barDelta + array.get(deltaValues, i) This aggregation process sums all the individual delta values from the lower timeframe bars that comprise each chart bar, capturing the complete volume flow activity within that period. The resulting bar delta then feeds into the various display calculations: rawCVD = ta.cum(barDelta) // Cumulative sum from chart start smoothCVD = ta.sma(rawCVD, smoothingLength) // Smoothed for noise reduction rollingCVD = math.sum(barDelta, rollingLength) // Rolling window calculation Note: This directional bar approach differs from exchange-level orderflow CVD, which uses tick data to separate aggressive buy orders (executed at the ask price) from aggressive sell orders (executed at the bid price). While this method provides a volume flow approximation rather than pure tape-reading precision, it offers a practical and accessible way to analyze buying and selling dynamics across all timeframes and instruments without requiring specialized data feeds on TradingView. 🟢 Key Features The indicator offers five distinct visualization modes, each designed to reveal different aspects of volume flow dynamics and cater to various trading strategies and market conditions. 1. Oscillator (Raw): Displays the true cumulative volume delta from the beginning of chart history, accompanied by an EMA signal line that helps identify trend direction and momentum shifts. When CVD crosses above the signal line, it indicates strengthening buying pressure; crosses below suggest increasing selling pressure. This mode is particularly valuable for spotting long-term accumulation/distribution phases and identifying divergences where CVD makes new highs/lows while price fails to confirm, often signaling potential reversals. 2. Oscillator (Smooth): Applies a simple moving average to the raw CVD to filter out noise while preserving the underlying trend structure, creating smoother signal line crossovers. Use this when trading trending instruments where you need confirmation of genuine volume-backed moves versus temporary volatility spikes. 3. Oscillator (Rolling): Calculates cumulative delta over only the most recent N bars (configurable window length), effectively resetting the baseline and removing the influence of distant historical data. This approach focuses exclusively on current market dynamics, making it highly responsive to recent shifts in volume pressure and particularly useful in markets that have undergone regime changes or structural shifts. This mode can be beneficial for traders when they want to analyze "what's happening now" without legacy bias from months or years of prior data affecting the readings. 4. Histogram: Renders the per-bar volume delta as individual histogram bars rather than cumulative values, showing the immediate buying or selling pressure that occurred during each specific candle. Positive (green) bars indicate that bar closed higher than it opened with buying volume, while negative (red) bars show selling volume dominance. This mode excels at identifying sudden volume surges, exhaustion points where large delta bars fail to move price, and bar-by-bar absorption patterns where one side is aggressively consuming the other's volume. 5. Candles: Transforms CVD data into OHLC candlestick format, where each candle's open represents the CVD at the start of the bar and subsequent intra-bar delta changes create the high, low, and close values. This visualization reveals the internal volume flow dynamics within each time period, showing whether buying or selling pressure dominated throughout the bar's formation and exposing intra-bar reversals or sustained directional pressure. Use candle wicks and bodies to identify volume acceptance/rejection at specific CVD levels, similar to how price candles show acceptance/rejection at price levels. ▶ Built-in Alert System: Comprehensive alerts for all display modes including bullish/bearish momentum shifts (CVD crossing signal line), buying/selling pressure detection (histogram mode), and bullish/bearish CVD candle formations. Fully customizable with exchange and timeframe placeholders. ▶ Visual Customization: Choose from 5 color presets (Classic, Aqua, Cosmic, Ember, Neon) or create your own custom color schemes. Optional price bar coloring feature overlays CVD trend colors directly onto your main chart candles, providing instant visual confirmation of volume flow and making divergences immediately apparent. Optional info label with configurable position and size displays current CVD values, data source timeframe, and mode at a glance.
Indicateur Pine Script®
par QuantAlgo
8:00 to 8:15 ORB BOXNY 8:00–8:15 Opening Box + Midpoint (Today Only) This indicator highlights the New York 8:00–8:15 AM (ET) opening range by automatically drawing a price box and midpoint for the current trading day only. During the 8:00–8:15 window, the indicator tracks the highest high and lowest low. Once the window ends, it plots: A horizontal opening range box extending to the right A midpoint line representing the equilibrium of the range At the start of each new New York trading day, the previous day’s box and midpoint are automatically removed, keeping the chart clean and focused on the current session. Key Features Fixed New York time (ET) session handling Automatically updates every trading day Displays range high, range low, and midpoint Box and midpoint extend forward for intraday reference Customizable color and transparency Designed for intraday trading and market structure analysis Common Use Cases Identifying early-session balance and bias Measuring volatility expansion after the NY open Acting as support/resistance reference levels Combining with ORB, liquidity, or momentum strategies This tool is especially useful for index futures, forex, and metals, where the New York session plays a major role in daily price discovery. If you want, I can also: Shorten this for a TradingView publish page Rewrite it more “technical” or more beginner‑friendly Add a disclaimer or school‑project version
Indicateur Pine Script®
par maguilar126
1
Triple EMA + Stochastic/ADX# Triple EMA + Stochastic/ADX Breakout Indicator A professional TradingView indicator designed for trend-following and momentum breakout trading. This system uses a hierarchical confirmation process to ensure high-probability entries and robust trend maintenance. ## 🚀 Core Trading Logic: "The Setup Cycle" This indicator operates on a **Cycle-Based Logic** rather than simple crossovers. A trade cycle is defined as: 1. **The Setup (Priming)**: A Stochastic crossover (K > D for Long, D > K for Short) initiates a "Setup Mode." This is marked by a small dot (Blue for Long, Orange for Short). 2. **The Confirmation (Trend)**: The systems checks for hierarchical EMA alignment (Fast > Medium > Slow for Longs). 3. **The Trigger (Breakout)**: Once the Setup is active and EMAs are aligned, every **Price Breakout** above the previous high (X-period) triggers a continuous **BUY/SELL mark**. 4. **The Exit (Take Profit/Stop)**: The cycle and trade only end when the Fast EMA crosses back over the Medium EMA (EMA 9/21 crossover). --- ## 🛠 Features ### 1. Triple EMA System * **Hierarchical Alignment**: Requires Fast > Medium > Slow (9, 21, 50 by default) for a confirmed trend direction. * **Dynamic Trend Background**: Chart background changes color when a full EMA trend is established. ### 2. Dual Filter System (Stochastic & ADX) * **Stochastic Setup**: Uses smoothed %K and %D to identify the start of momentum cycles. * **ADX Filter**: Provides a trend-strength baseline. Default threshold is set to 20 to filter out choppy markets. ### 3. Price Breakout Confirmation * Requires price to break above/below the previous High/Low of the last X bars (default 10). * Allows for **continuous entries** within a single trend cycle. ### 4. Robust Exit Strategy * **EMA Crossover Exit**: The primary exit method. Triggers an "EXIT" flag when the trend momentum shifts. * **ATR Trailing Stop**: A secondary volatility-based stop that moves with the price. Can be set as the absolute exit or used for visual reference. ### 5. Mean Reversion Mode (Optional) * Identifies overextended price action (percent deviation from EMA2). * Signals potential "bounce" or "rejection" trades against the trend. --- ## 📊 Dashboard & Visuals * **🟢 BUY / 🔴 SELL**: Trend continuation breakout signals. * **🟠 EXIT / 🟣 EXIT**: Trend reversal/exit signals. * **🔵/🟠 Small Dots**: Setup priming moments. * **Real-time Dashboard**: Displays current Setup Status, EMA Alignment, Breakout status, ADX strength, and calculated Stop levels. --- ## ⚙️ How to Customize | Parameter | Recommended Use | | :--- | :--- | | **Breakout Lookback** | Lower (3-5) for aggressive scalping, Higher (10-20) for conservative trends. | | **Filter Mode** | Choose "Stochastic" for momentum or "ADX" for trend strength preference. | | **ATR Multiplier** | Reduce (1.5) for tighter stops, Increase (3.0) for wider trend following. | | **Exit ONLY on EMA** | Enable to stay in trades longer; Disable to exit immediately on ATR stop hits. | --- ## 📥 Installation 1. Open your **Pine Editor** in TradingView. 2. Create a new "Indicator." 3. Copy the code from `Triple_EMA_Stochastic_ADX.pine`. 4. Click **Save** and **Add to Chart**. --- *Developed for Dhan/MCX/Futures and general Asset Trading.*
Indicateur Pine Script®
par trade_crush
1
GOLD TERTIUM MGC 1mThis indicator is a visual tool for TradingView designed to help you read trend structure using EMAs and highlight potential long and short entries on the MGC 1‑minute chart, while filtering pullbacks and avoiding trades when the 200 EMA is flat. ​ It calculates five EMAs (32, 50, 110, 200, 250) and plots them in different colors so you can clearly see the moving‑average stack and overall direction. The main trend is defined by the 200 EMA: bullish when price and the fast EMAs (32 and 50) are above it with a positive slope, and bearish when they are below it with a negative slope; if the 200 EMA is almost flat, signals are blocked to reduce trading in choppy markets. ​ Entry logic looks for a pullback into the 32–50 EMA zone on the previous candle, then requires a trend‑aligned candle to trigger a signal: long when the trend is up, the previous bar retested the EMA zone, and the current bar closes above EMA 32 with a bullish body; short when the trend is down, there was a valid retest, the current bar closes below EMA 32 with a bearish body and EMA 32 is below EMA 50. On the chart, you will see colored EMAs plus green “L” triangles under bars for potential long entries and red “S” triangles above bars for potential short entries, which are meant as visual cues rather than automatic trade instructions
Indicateur Pine Script®
par bkfeuer326
Triple Confirmation with Alerts//@version=5 indicator("Triple Confirmation with Alerts", overlay=true) // Confirmation 1: ADX Trend Strength adxlen = input(14, "ADX Length") dilen = input(14, "DI Length") = ta.dmi(dilen, adxlen) trendStrong = adx > 25 uptrend = diplus > diminus and trendStrong downtrend = diminus > diplus and trendStrong // Confirmation 2: Stochastic k = ta.sma(ta.stoch(close, high, low, 14), 3) d = ta.sma(k, 3) stochBullish = k > d and k <= d and k < 80 stochBearish = k < d and k >= d and k > 20 // Confirmation 3: Bollinger Bands bbLength = input(20, "BB Length") bbMult = input(2.0, "BB Multiplier") basis = ta.sma(close, bbLength) dev = bbMult * ta.stdev(close, bbLength) upper = basis + dev lower = basis - dev bbBullish = close > lower and close <= lower bbBearish = close < upper and close >= upper // Generate Signals buySignal = uptrend and stochBullish and bbBullish sellSignal = downtrend and stochBearish and bbBearish // Plot plotshape(buySignal, "Buy", shape.triangleup, location.belowbar, color.green, size=size.small) plotshape(sellSignal, "Sell", shape.triangledown, location.abovebar, color.red, size=size.small) // Alerts alertcondition(buySignal, "Triple Confirmation Buy", "Buy signal generated") alertcondition(sellSignal, "Triple Confirmation Sell", "Sell signal generated")
Indicateur Pine Script®
par PodaAnjinadhari
HOHO Oscillator Squeeze With Goldilocks Pivot FractalsDESCRIPTION: HOHO Oscillator Squeeze With Goldilocks Pivot Fractals combines three powerful technical analysis methodologies into one comprehensive momentum indicator designed for identifying high-probability trading opportunities. Core Components: 1. HOHO (Hump Oscillator) Multi-timeframe momentum analysis using dual oscillators (fast and slow) to identify market momentum shifts. The histogram colors change based on momentum direction and strength, providing clear visual cues for trend changes. 2. Squeeze Detection Bollinger Bands and Keltner Channel compression analysis identifies periods of low volatility (squeeze conditions) that often precede significant price moves. Yellow dots on the zero line indicate active squeeze conditions. 3. Goldilocks Pivot Fractals Williams Fractals-based reversal detection identifies significant swing highs and lows. BUY and SELL signals are dynamically positioned to "hug" the histogram, providing clear entry and exit signals at major turning points. Key Features: - Dynamic Signal Positioning: Arrows and text automatically adjust to histogram height for optimal visibility - Customizable Visual Elements: Full control over colors for arrows, text, squeeze dots, and histogram - Multiple Alert Options: Configurable alerts for fractals, squeeze events, and momentum shifts - Adjustable Sensitivity: Fractal periods can be tuned for different trading styles (lower = more signals, higher = fewer signals) - Paint Bars Option: Optional bar coloring based on fast or slow oscillator momentum - Non-Repainting: All signals are based on confirmed price action - Independent Spacing Controls: Separate BUY and SELL text spacing for perfect visual balance How to Use: Entry Signals: - BUY arrows appear below histogram at swing lows (bullish fractals) - SELL arrows appear above histogram at swing highs (bearish fractals) - Best entries occur when squeeze releases coincide with fractal signals Momentum Confirmation: - Green histogram = bullish momentum - Red histogram = bearish momentum - Lighter shades indicate weakening momentum - Darker shades indicate strengthening momentum Squeeze Conditions: -Yellow dots = Volatility compression (squeeze active) - Gray dots = Normal volatility (no squeeze) - Watch for squeeze release followed by directional move HOHO Settings: - Adjustable MA lengths and types (EMA/SMA) - Customizable smoothing parameters Goldilocks Fractals: - Fractal Periods: Sensitivity control (default: 2) - Arrow Spacing: Distance from histogram (default: 2.0) - BUY Text Spacing: Distance from BUY arrow (default: 1.7) - SELL Text Spacing: Distance from SELL arrow (default: 0.8) - Toggle arrows and text independently Visual Customization: - Arrow colors (bullish/bearish) - Text colors (BUY/SELL) - Squeeze dot colors (ON/OFF) - Dot size adjustment Alerts: - Bullish/Bearish fractal detection - Squeeze start/release - Momentum shift crossovers Best Practices: - Trend Alignment: Use on higher timeframes (15m+) for more reliable signals - Confluence: Combine fractal signals with momentum direction for higher probability trades - Risk Management: Place stops beyond the fractal high/low that triggered the signal - Squeeze Strategy: Wait for squeeze release before taking directional positions - Filter Signals: Increase fractal periods (10-20) to focus only on major turning points Recommended Timeframes: - Scalping: 5m-15m (fractal periods 2-5) - Day Trading: 15m-1H (fractal periods 5-10) - Swing Trading: 4H-Daily (fractal periods 10-20) Important Notes: This indicator is provided for educational and informational purposes only. It is not financial advice. Past performance does not guarantee future results. Always perform your own analysis and use proper risk management. Trading involves substantial risk of loss.
Indicateur Pine Script®
par NPR21
2
RSI MTF Table (Threshold Colors + Direction Arrows) [v6]Sometimes I want to know what other timeframes are indicating for the RSI so I borrowed from another indicator and created this script. Since I swing trade, I have the timeframes set higher, but you can adjust them to your needs in the settings. Each pane is color coded light green below 50, and pink above 50. Then you can define your own thresholds but the defaults are Red above 70, and Dark Green below 30. The colors can be adjusted to your needs. The top of each pane is its timeframe, then the RSI value for that timeframe. Then I check the current bar against the prior bar to see if the current value is higher (Up Arrow) or lower (Down Arrow) so that you know which way the RSI is moving. The position on your chart can be changed to your needs. This keeps the momentum in perspective for me. I hope it helps you. Good luck in your trading.
Indicateur Pine Script®
par cpolaritz2
EMA Angle Average by Eric ValerianoThis indicator determines market direction by calculating the angle of an exponential moving average and smoothing that angle over several bars. By averaging the EMA’s slope, it reduces noise and clearly classifies the market as bullish, bearish, or neutral based on trend strength rather than short term price fluctuations. It is best used as a trend filter to confirm direction, avoid choppy conditions, and add context to entries based on other signals such as pullbacks, breakouts, or momentum setups.
Indicateur Pine Script®
par ericvaleriano
Vix FIX dotsDescription Vix FIX Dots is a momentum and volatility-based trend-following tool. It combines the classic Williams VIX Fix logic with Stochastic and RSI filters to identify high-probability reversal points and trend exhaustion. Unlike the standard VIX Fix which is often displayed in a separate pane, this script overlays signals directly onto your chart as colorful dots to simplify the decision-making process. How it Works The script calculates the "Synthetic VIX" (Williams VIX Fix) to find market bottoms and volatility peaks. To reduce noise and false signals, it incorporates price action filters and trend-strength lookbacks. Signal Guide The indicator plots four distinct types of dots: Green Circle (Below Bar): Filtered Long Entry. This represents a standard buy signal where volatility has peaked and price action confirms a move up. Blue Circle (Below Bar): Aggressive Long Entry. A faster signal for traders looking to catch a move earlier, based on multi-candle lookbacks. Red Circle (Above Bar): Filtered Exit/Short. Indicates a standard trend exhaustion point. Orange Circle (Above Bar): Aggressive Exit/Short. A faster signal indicating the trend may be rolling over. Key Features Volatility Bands: Uses Bollinger Bands and Percentile calculations on the VIX Fix to identify extreme exhaustion. Price Action Filter: Signals only trigger if the current close outperforms a user-defined number of previous bars. Customizable Lookbacks: Fully adjustable settings for Stochastic and RSI filters to match your specific timeframe (M5, H1, D1, etc.).
Indicateur Pine Script®
par ecowolfrb