Commencez

Volatilité

SOFEX High-End Indicators + BacktestingBINANCE:BTCUSDT.P BINANCE:ETHUSDT.P Introducing the first publicly available suite of indicators for Bitcoin and Ethereum by Sofex - the High-End Indicators & Backtesting System. 🔬 Trading Philosophy The High-End Indicators & Backtesting system offers both trend-following and mean-reversal algorithms to provide traders with a deep insight into the highly volatile cryptocurrency markets, known for their market noise and vulnerability to manipulation. With these factors in mind, our indicators are designed to sidestep most potentially false signals. This is facilitated further by the "middle-ground" time frame (1 Hour) we use. Our focus is on the two largest cryptocurrencies: Bitcoin and Ethereum , which provide high liquidity, necessary for reliable trading. Therefore, we recommend using our suite on these markets. The backtesting version of the Sofex High-End Indicators includes mainly trend-following indicators. This is because our trading vision is that volatility in cryptocurrency markets is a tool that should be used carefully, and many times avoided. Furthermore, mean-reversal trading can lead to short-term profits, but we have found it less than ideal for long-term trading. The script does not aim to make a lot of trades, or to always remain in a position and switch from long to short. Many times there is no direction and the market is in "random walk mode", and chasing trades is futile. Based on our experience, it is preferable if traders remain neutral the majority of the time and only enter trades that can be exited in the foreseeable future. Trading just for the sake of it ultimately leads to loss in the long-run. Expectations of performance should be realistic. We also focus on a balanced take-profit to stop-loss ratio. In the default set-up of the script, that is a 2% : 2% (1:1) ratio. A relatively low stop loss and take profit build onto our idea that positions should be exited promptly. There are many options to edit these values, including enabling trailing take profit and stop loss. Traders can also completely turn off TP and SL levels, and rely on opposing signals to exit and enter new trades. Extreme scenarios can happen on the cryptocurrency markets, and disabling stop-loss levels completely is not recommended. The position size should be monitored since all of it is at risk with no stop-loss. We take pride in presenting this comprehensive suite of trading indicators, designed for both manual and automated use. Although automated use leads to increased efficiency, traders are free to incorporate any of our indicators into their own manual trading strategy. ⚙️ Indicators By default, all indicators are enabled for both Long and Short trades. Extreme Trend Breakouts The Extreme Trend Breakouts indicator seeks to follow breakouts of support and resistance levels, while also accounting for the unfortunate fact that false signals can be generated on these levels. The indicator combines trend-breakout strategies with various other volatility and direction measurements. It works best in the beginning of trends. Underpinning this indicator are renowned Perry Kaufman's Adaptive Moving Averages (PKAMA) alongside our proprietary adaptive moving averages. These dynamic indicators adjust their parameters based on recent price movements, attempting to catch trends while maintaining consistent performance in the long run. In addition, our modification of the TTM Squeeze indicator further enhances the Extreme Trend Breakouts indicator, making it more responsive, especially during the initial stages of trends and filtering of "flat" markets. High-Volatility Trend Follower The High-Volatility Trend Follower indicator is based around the logic of evading market conditions where volatility is low (choppy markets) and aggressively following confirmed trends. The indicator works best during strong trends, however, it has the downside of entering trades at trend tops or bottoms. This indicator also leverages our proprietary adaptive moving averages to identify and follow high-volatility trends effectively. Furthermore, it uses the Average Directional Index, Aroon Oscillator, ATR and a modified version of VWAP, to categorize trends into weak or strong ones. The VWAP indicator is used to identify the monetary (volume) inflow into a given trend, further helping to avoid short-term manipulations. Low-Volatility Reversal The Low-Volatility Reversal aims at plugging the holes that trend-following indicators ignore. It specifically looks for choppy markets. Using proven concepts such as Relative Strength Index and volume measurements, among others, this indicator finds local tops and bottoms with good accuracy. It works best in choppy markets with low to medium volatility. It has a downside that all reversals have, losing trades at the end of choppy markets and in the beginning of big trends. This indicator, like the others, employs PKAMA in conjunction with our proprietary adaptive moving averages, and an Average PSAR indicator to seek out "sideways" markets. Furthermore, Bollinger Bands with an adaptive basis line is used, with the idea of trading against the short-term trends by looking at big deviations in price movement. The above mentioned indicators attempt to catch local tops and bottoms in markets. Adaptive Trend Convergence The Adaptive Trend Convergence aims at following trends while avoiding entering positions at local bottoms and tops. It does so by comparing a number of adaptive moving averages and looking for convergence among them. Adaptive filtering techniques for avoiding choppy markets are also used. This indicator utilizes our proprietary adaptive moving averages, and an Average Price Range indicator to identify trend convergence and divergence effectively, preventing false signals during volatile market phases. It also makes use of Bollinger Bands with an adaptive moving average basis line and price-action adjusted deviation. Contrasting to the Low-Volatility Reversal condition described above, the Bollinger Bands used here attempt to follow breakouts outside of the lower and upper bands. Double-Filtered Channel Breakouts The Double-Filtered Channel Breakouts indicator is made out of adaptive channel-identifying indicators. The indicator then follows trends that significantly diverge from the established channels. This aims at following extreme trends, where rapid, continuous movements in either direction occur. This indicator works best in very strong trends and follows them relentlessly. However, these strong trends can end in strong reversals, and the indicator can be stopped out on the last trade. Our Double-Filtered Channel Breakouts indicator is built on a foundation of adaptive channel indicators. We've harnessed the power of Keltner Channels and Bollinger Band Channels, with a similar approach used in the Adaptive Trend Convergence indicator. The basis and upper/lower bands of the channels do not rely on fixed deviation parameters, rather on adaptive ones, based on price action and volatility. This combination seeks to identify and follows extreme trends. Direction Tracker The Direction Tracker indicator is made out of a central slower, adaptive moving average that clearly recognizes global, long-term trends. Combined with direction and range indicators, among others, this indicator excels at finding the long-term trend and ignoring temporary pullbacks in the opposite direction. It works best at the beginning and middle of long and strong trends. It can fail at the end of trends and on very strong historical resistance lines (where sharp reversals are common). Our Direction Tracker indicator integrates an adaptive SuperTrend indicator into its core, alongside our proprietary adaptive moving averages, to accurately identify and track long-term trends while mitigating temporary pullbacks. Furthermore, it uses Average True Range, ADX and other volatility indicators to attempt to catch unusual moves on the market early-on. 📟 Parameters Menu To offer traders flexibility, our system comes with a comprehensive parameter menu: Preset Selection : Choose between Bitcoin or Ethereum presets to tailor the indicators to your preferred cryptocurrency market. Global Signal Direction: Set the global signal direction as Long, Short, or Both, depending on your trading strategy. Global Sensitivity Parameter : Adjust the system's sensitivity to adapt to different trend-following conditions, particularly beneficial during higher-strength trends. Source of Signals : Toggle individual indicators on or off according to your preference. By default, all indicators are enabled. Customize the indicators to trade Long, Short, or Both, aligning them with your desired market exposure. Confirmation of Signals : Set the minimum number of confirmed signals on the same bar, ensuring signals are generated only when specific confirmation criteria are met. The default value is one, and it can be adjusted for both Long and Short signals. Exit of Signals : You have options regarding Take-Profit (TP) and Stop-Loss (SL) levels. Enable TP/SL levels to exit trades at predetermined levels, or disable them to rely on direction changes for exits. Be aware that removing stop losses can introduce additional risk, and position sizing should be carefully monitored. By enabling Trailing TP/SL, the system switches to a trailing approach, allowing you to: - Place an initial customizable SL. - Specify a level (%) for the Trailing SL to become active. - When the activation level is reached, the system moves the trailing stop by a given Offset (%). Additionally, you can enable exit at break-even, where the system places an exit order when the trail activation level is reached, accounting for fees and slippage. Alert Messages : Define the fields for alert messages based on specific conditions. You can set up alerts to receive email, SMS, and in-app notifications. If you use webhooks for alerts, exercise caution, as these alerts can potentially execute trades without human supervision. Backtesting : Default backtesting parameters are set to provide realistic backtesting performance: - 0.04% Commission per trade (for both entries and exits) - 3 ticks Slippage (highly dependent on exchange) - Initial capital of $1000 - Order size of $1000 While the order size is equal to the initial capital, the script employs a 2% stop-loss order to limit losses and attempts to prevent risky trades from creating big losses. The order size is a set dollar value, so that the backtesting performance is linear, instead of using % of capital which may result in unrealistic backtesting performance. Risk Disclaimer Please be aware that backtesting results, while valuable for statistical overview, do not guarantee future performance in any way. Cryptocurrency markets are inherently volatile and risky. Always trade responsibly and do not risk more than you can afford to lose.
Stratégie Pine Script®
par sofex
5
3kilos BTC 15mThe "3kilos BTC 15m" is a comprehensive trading strategy designed to work on a 15-minute timeframe for Bitcoin (BTC) or other cryptocurrencies. This strategy combines multiple indicators, including Triple Exponential Moving Averages (TEMA), Average True Range (ATR), and Heikin-Ashi candlesticks, to generate buy and sell signals. It also incorporates risk management features like take profit and stop loss. Indicators Triple Exponential Moving Averages (TEMA): Three TEMA lines are used with different lengths and sources: Short TEMA (Red) based on highs Long TEMA 1 (Blue) based on lows Long TEMA 2 (Green) based on closing prices Average True Range (ATR): Custom ATR calculation with EMA smoothing is used for volatility measurement. Supertrend: Calculated using ATR and a multiplier to determine the trend direction. Simple Moving Average (SMA): Applied to the short TEMA to smooth out its values. Heikin-Ashi Close: Used for additional trend confirmation. Entry & Exit Conditions Long Entry: Triggered when the short TEMA is above both long TEMA lines, the Supertrend is bullish, the short TEMA is above its SMA, and the Heikin-Ashi close is higher than the previous close. Short Entry: Triggered when the short TEMA is below both long TEMA lines, the Supertrend is bearish, the short TEMA is below its SMA, and the Heikin-Ashi close is lower than the previous close. Take Profit and Stop Loss: Both are calculated as a percentage of the entry price, and they are set for both long and short positions. Risk Management Take Profit: Set at 1% above the entry price for long positions and 1% below for short positions. Stop Loss: Set at 3% below the entry price for long positions and 3% above for short positions. Commission and Pyramiding Commission: A 0.07% commission is accounted for in the strategy. Pyramiding: The strategy does not allow pyramiding. Note This strategy is designed for educational purposes and should not be considered as financial advice. Always do your own research and consider consulting a financial advisor before engaging in trading.
Stratégie Pine Script®
par deperp
Trend Confirmation StrategyThe profitability and uniqueness of a trading strategy depend on various factors including market conditions, risk management, and the strategy's ability to capitalize on price movements. I'll describe the strategy provided and highlight its potential benefits and differences compared to other strategies: Strategy Overview: The provided strategy combines three technical indicators: Supertrend, MACD, and VWAP. It aims to identify potential entry and exit points by confirming trend direction and considering the proximity to the VWAP level. The strategy also incorporates stop-loss and take-profit mechanisms, as well as a trailing stop. Unique Aspects and Potential Benefits: Trend Confirmation: The strategy uses both Supertrend and MACD to confirm the trend direction. This dual confirmation can increase the likelihood of accurate trend identification and filter out false signals. VWAP Confirmation: The strategy considers the proximity of the price to the VWAP level. This dynamic level can act as a support or resistance and provide additional context for entry decisions. Adaptive Stop Loss: The strategy sets a stop-loss range, which helps provide some tolerance for minor price fluctuations. This adaptive approach considers market volatility and helps prevent premature stop-loss triggers. Trailing Stop: The strategy incorporates a trailing stop mechanism to lock in profits as the trade moves in the desired direction. This can potentially enhance profitability during strong trends. Partial Profit Booking: While not explicitly implemented in the provided code, you could consider booking partial profits when the MACD shows a crossover in the opposite direction. This aspect could help secure gains while still keeping exposure to potential further price movements. Key Differences from Other Strategies: Dual Indicator Confirmation: The combination of Supertrend and MACD for trend confirmation is a unique aspect of this strategy. It adds an extra layer of filtering to enhance the accuracy of entry signals. Dynamic VWAP: Incorporating the VWAP level into the decision-making process adds a dynamic element to the strategy. VWAP is often used by institutional traders, and its inclusion can provide insights into the market sentiment. Adaptive Stop Loss and Trailing: The strategy's use of an adaptive stop-loss range and a trailing stop can help manage risk and protect profits more effectively during changing market conditions. Partial Profit Booking: The suggestion to consider partial profit booking upon MACD crossovers in the opposite direction is a practical approach to secure gains while staying in the trade. Caution and Considerations: Backtesting: Before deploying any strategy in real trading, it's crucial to thoroughly backtest it on historical data to understand its performance under various market conditions. Risk Management: While the strategy has built-in risk management mechanisms, it's essential to carefully manage position sizes and overall portfolio risk. Market Conditions: No strategy works well in all market conditions. It's important to be flexible and adjust the strategy or refrain from trading during particularly volatile or unpredictable periods. Continuous Monitoring: Even though the strategy includes automated components, continuous monitoring of the trades and market conditions is necessary. Adaptability: Markets can change over time. Traders need to be prepared to adapt the strategy as necessary to stay aligned with evolving market dynamics.
Stratégie Pine Script®
par hamdankhan111
1
Buying Selling Volume StrategyFirst I would like to give the original credit and thanks to @ceyhun for his amazing volume script. The way I decided to convert it into a strategy is divided into multiple types. First, I decided in order to smooth out the values and make it more accurate to adapt the values to multiple timeframes. After that I took the initial values from the buyers and sellers , and made a rest operation between them to have a flat difference between the power of both sides. WIth that later on I decided to to apply a volatility filter,in this case bollinger bands, in order to find out potential leading trends. At the same time in order to filter even more, I decided to make use as well for weekly VWAP values of the asset used. Lastly I added a dynamic risk management into it , based on the ATR Daily values of the asset values. As for the rules used, for example for long, I am looking that the price of the asset is above the weekly VWAP, after that I am checking that the MTF volume rest operation is both bullish and above the upper side of the bollinger. For short we would want the asset to be below the weekly VWAP, and the volume to be bearish and above the upper side of bollinger. The exit is either based on daily ATR values multipliers, or if we have a reverse condition. If you have any questions, please let me know !
Stratégie Pine Script®
par exlux
1
TrendGuard Flag Finder - Strategy [presentTrading] Introduction and How It Is Different In the vast world of trading strategies, the TrendGuard Flag Finder stands out as a unique blend of traditional flag pattern detection and the renowned SuperTrend indicator. - A significant portion of the Flag Pattern detection is inspired by the "Flag Finder" code by @Amphibiantrading, which serves as one of foundational element of this strategy. - While many strategies focus on either trend-following or pattern recognition, this strategy harmoniously combines both, offering traders a more holistic view of the market. - The integration of the SuperTrend indicator not only provides a clear direction of the prevailing trend but also offers potential stop-loss levels, enhancing the strategy's risk management capabilities. AAPL 1D chart ETHBTC 6hr chart Strategy: How It Works The TrendGuard Flag Finder is primarily built on two pillars: 1. Flag Pattern Detection : At its core, the strategy identifies flag patterns, which are continuation patterns suggesting that the prevailing trend will resume after a brief consolidation. The strategy meticulously detects both bullish and bearish flags, ensuring traders can capitalize on opportunities in both rising and falling markets. What is a Flag Pattern? A flag pattern consists of two main components: 1.1 The Pole : This is the initial strong price move, which can be either upwards (for bullish flags) or downwards (for bearish flags). The pole represents a strong surge in price in a particular direction, driven by significant buying or selling momentum. 1.2 The Flag : Following the pole, the price starts consolidating, moving against the initial trend. This consolidation forms a rectangular shape and is characterized by parallel trendlines. In a bullish flag, the consolidation will have a slight downward tilt, while in a bearish flag, it will have a slight upward tilt. How the Strategy Detects Flags: Identifying the Pole: The strategy first identifies a strong price movement over a user-defined number of bars. This movement should meet a certain percentage change to qualify as a pole. Spotting the Flag: After the pole is identified, the strategy looks for a consolidation phase. The consolidation should be counter to the prevailing trend and should be contained within parallel lines. The depth (for bullish flags) or rally (for bearish flags) of this consolidation is calculated to ensure it meets user-defined criteria. 2. SuperTrend Integration : The SuperTrend indicator, known for its simplicity and effectiveness, is integrated into the strategy. It provides a dynamic line on the chart, signaling the prevailing trend. When prices are above the SuperTrend line, it's an indication of an uptrend, and vice versa. This not only confirms the flag pattern's direction but also offers a potential stop-loss level for trades. When combined, these components allow traders to identify potential breakout (for bullish flags) or breakdown (for bearish flags) scenarios, backed by the momentum indicated by the SuperTrend. Usage To use the SuperTrend Enhanced Flag Finder: - Inputs : Begin by setting the desired parameters. The strategy offers a range of user-controlled settings, allowing for customization based on individual trading preferences and risk tolerance. - Visualization : Once the parameters are set, the strategy will identify and visually represent flag patterns on the chart. Bullish flags are represented in green, while bearish flags are in red. - Trade Execution : When a breakout or breakdown is identified, the strategy provides entry signals. It also offers exit signals based on the SuperTrend, ensuring that traders can capitalize on the momentum while managing risk. Default Settings The strategy comes with a set of default settings optimized for general use: - SuperTrend Parameters: Length set to 10 and Factor set to 5.0. - Bull Flag Criteria: Max Flag Depth at 7, Max Flag Length at 10 bars, Min Flag Length at 3 bars, Prior Uptrend Minimum at 9%, and Flag Pole Length between 7 to 13 bars. - Bear Flag Criteria: Similar settings adjusted for bearish patterns. - Display Options: By default, both bullish and bearish flags are displayed, with breakout and breakdown points highlighted.
Stratégie Pine Script®
par PresentTrading
2
Liquidity Breakout - Strategy [presentTrading]- Introduction and How It Is Different The Liquidity Breakout Strategy is a unique trading strategy that focuses on identifying and leveraging patterns in market price data. This strategy, mainly inspired by the script "Master Pattern" by LuxAlgo, takes a different approach from many traditional strategies that rely on technical indicators or fundamental analysis. Instead, the Liquidity Breakout is based on the concept of contraction detection and liquidity levels. This approach allows traders to identify potential trading opportunities that other strategies might miss. BTCUSDT 6h The strategy is different from other trading strategies because it uses a unique combination of pattern detection, liquidity levels, and user-defined trading direction. This combination allows the strategy to adapt to various market conditions and trading styles, making it a versatile tool for traders. - Strategy: How It Works 1. Contraction Detection: The strategy uses a lookback period defined by the user (default is 10 bars) to identify contractions in the market. A contraction is a period where the market is consolidating, often followed by a significant price movement. The strategy identifies contractions by finding pivot highs and pivot lows within the lookback period. If a pivot high is lower than the previous pivot high and a pivot low is higher than the previous pivot low, a contraction is detected. 2. liquidity Levels: What are Liquidity levels? Liquidity levels, also known as liquidity pools or zones, are price levels at which there is a significant amount of trading activity. They are often areas where large institutional traders (like banks or hedge funds) have placed orders. These levels are important because they can act as support or resistance levels, and price often reacts at these levels. In the context of this strategy, liquidity levels are used to identify potential entry and exit points for trades. When the price reaches a liquidity level, it could indicate a potential trading opportunity. For example, if the price breaks through a liquidity level, it could signal the start of a new trend. On the other hand, if the price approaches a liquidity level and then reverses, it could signal a potential reversal. The strategy uses these two elements to identify potential trading opportunities. When a contraction is detected, the strategy will look for a breakout in the direction of the trend. If the breakout occurs at a liquidity level, the strategy will execute a trade. The strategy also allows traders to set their stop loss based on either the Average True Range (ATR) or a fixed percentage. This flexibility allows traders to manage their risk according to their personal risk tolerance and trading style. - Trade Direction One of the unique features of the Master Pattern Strategy is the ability to choose the trading direction. Traders can choose to trade in the "Long" direction, the "Short" direction, or "Both". This feature allows traders to adapt the strategy to their personal trading style and market outlook. For example, if a trader believes that the market is in an uptrend, they can choose to trade only in the "Long" direction. Conversely, if the market is in a downtrend, they can choose to trade only in the "Short" direction. If the trader believes that the market is volatile and there are opportunities in both directions, they can choose to trade in "Both" directions. - Usage To use the strategy, traders need to input their preferred settings, including the contraction detection lookback period, liquidity levels, stop loss type, and trading direction. Once these settings are input, the strategy will automatically detect potential trading opportunities and execute trades according to the defined parameters. - Default Settings The default settings for the Master Pattern Strategy are as follows: Contraction Detection Lookback: 10 Liquidity Levels: 20 Stop Loss Type: ATR ATR Length: 20 ATR Multiplier: 3.0 Fixed Percentage: 0.01 Trading Direction: Both These settings can be adjusted according to the trader's personal preferences and market conditions. It's recommended that traders experiment with different settings to find the ones that work best for their trading style and goals.
Stratégie Pine Script®
par PresentTrading
4
PercentX Trend Follower [Trendoscope]"Trendoscope" was born from our trading journey, where we first delved into the world of trend-following methods. Over time, we discovered the captivating allure of pattern analysis and the exciting challenges it presented, drawing us into exploring new horizons. However, our dedication to trend-following methodologies remains steadfast and continues to be an integral part of our core philosophy. Here we are, introducing another effective trend-following methodology, employing straightforward yet powerful techniques. 🎲 Concepts Introducing the innovative PercentX Oscillator , a representation of Bollinger PercentB and Keltner Percent K. This powerful tool offers users the flexibility to customize their PercentK oscillator, including options for the type of moving average and length. The Oscillator Range is derived dynamically, utilizing two lengths - inner and outer. The inner length initiates the calculation of the oscillator's highest and lowest range, while the outer length is used for further calculations, involving either a moving average or the opposite side of the highest/lowest range, to obtain the oscillator ranges. Next, the Oscillator Boundaries are derived by applying another round of high/low or moving average calculations on the oscillator range values. Breakouts occur when the close price crosses above the upper boundary or below the lower boundary, signaling potential trading opportunities. 🎲 How to trade a breakout? To reduce false signals, we employ a simple yet effective approach. Instead of executing market trades, we use stop orders on both sides at a certain distance from the current close price. In case of an upper side breakout, a long stop order is placed at 1XATR above the close, and a short stop order is placed at 2XATR below the close. Conversely, for a lower side breakout, a short stop order is placed at 1XATR below the close, and a long stop order is placed at 2XATR above the ATR. As a trend following method, our first inclination is to trade on the side of breakout and not to find the reversals. Hence, higher multiplier is used for the direction opposite to the breakout. The script provides users with the option to specify ATR multipliers for both sides. Once a trade is initiated, the opposite side of the trade is converted into a stop-loss order. In the event of a breakout, the script will either place new long and short stop orders (if no existing trade is present) or update the stop-loss orders if a trade is currently running. As a trend-following strategy, this script does not rely on specific targets or target levels. The objective is to run the trade as long as possible to generate profits. The trade is only stopped when the stop-loss is triggered, which is updated with every breakout to secure potential gains and minimize risks. 🎲 Default trade parameters Script uses 10% equity per trade and up to 4 pyramid orders. Hence, the maximum invested amount at a time is 40% of the equity. Due to this, the comparison between buy and hold does not show a clear picture for the trade. Feel free to explore and optimize the parameters further for your favorite symbols. 🎲 Visual representation The blue line represents the PercentX Oscillator, orange and lime colored lines represent oscillator ranges. And red/green lines represent oscillator boundaries. Oscillator spikes upon breakout are highlighted with color fills.
Stratégie Pine Script®
par Trendoscope
13
Crunchster's Turtle and Trend SystemThis is a combination of two popular systematic trading strategies - in the trend following category. The strategy is designed for use on the daily timeframe. Specific features of this system are outlined below: 1. Two different strategies to choose from, "Trend" which is a volatility adjusted Exponential Moving Average (EMA) crossover strategy and "Breakout" which is my adaptation of the well documented "Turtle Strategy" 2. Uses advanced position sizing and risk management, usually reserved for institutional portfolio management, a proven technique utilised by Commodity Trading Advisors and Managed Futures funds (Algo/Quant funds). "Trend" uses a fast (user defined) and slow EMA crossover, where the slow length is 5 times the fast length. The resulting signal is adjusted for the volatility of returns over a 252 lookback period, which helps to normalise the signal across different assets. The system goes long or short when it detects a new trend has formed. "Break" uses the highest high or lowest low over a user defined lookback period to define the recent range. This is converted into a price normalised signal to allow the system to detect when a breakout occurs. The system goes long or short based off the breakout signal. Position sizing is based on recent price volatility and the user defined annualised risk target. In essence positions are inverse volatility weighted, so larger size is opened during lower volatility and smaller size during increased volatility. Recent volatility is calculated as the standard deviation of returns with 14 period lookback, then extrapolated into an annualised volatility of expected returns. Annualised recent volatility is then referenced to the risk target set by the user to adjust the position size. The default settings are a conservative 15% annual risk target/volatility. Initial capital should be set as the maximum risk capital per trade (ie if $10,000 total capital and 10% risk per trade, initial capital should be $1000). Maximum leverage per position can be set independently, to facilitate hitting risk targets that are greater than the natural volatility of the traded asset, and to accommodate low volatility conditions, whilst maintaining overall risk controls. Direction (long or short) is at the user's discretion. Hard stop losses are based on multiples of the average true range of recent price (14 period lookback), user configurable. Strategy trailing stops are based off recent highest highs or lowest lows (user defined lookback) to cut the position if the trend or momentum is lost. Although both strategies can be run simultaneously, optimal diversification will be achieved if ran separately/individually to avoid masking of entries.
Stratégie Pine Script®
par Crunchster1
4
CCI+EMA Strategy with Percentage or ATR TP/SL [Alifer]This is a momentum strategy based on the Commodity Channel Index (CCI), with the aim of entering long trades in oversold conditions and short trades in overbought conditions. Optionally, you can enable an Exponential Moving Average (EMA) to only allow trading in the direction of the larger trend. Please note that the strategy will not plot the EMA. If you want, for visual confirmation, you can add to the chart an Exponential Moving Average as a second indicator, with the same settings used in the strategy’s built-in EMA. The strategy also allows you to set internal Stop Loss and Take Profit levels, with the option to choose between Percentage-based TP/SL or ATR-based TP/SL. The strategy can be adapted to multiple assets and timeframes: Pick an asset and a timeframe Zoom back as far as possible to identify meaningful positive and negative peaks of the CCI Set Overbought and Oversold at a rough average of the peaks you identified Adjust TP/SL according to your risk management strategy Like the strategy? Give it a boost! Have any questions? Leave a comment or drop me a message. CAUTIONARY WARNING Please note that this is a complex trading strategy that involves several inputs and conditions. Before using it in live trading, it is highly recommended to thoroughly test it on historical data and use risk management techniques to safeguard your capital. After backtesting, it's also highly recommended to perform a first live test with a small amount. Additionally, it's essential to have a good understanding of the strategy's behavior and potential risks. Only risk what you can afford to lose . USED INDICATORS 1 — COMMODITY CHANNEL INDEX (CCI) The Commodity Channel Index (CCI) is a technical analysis indicator used to measure the momentum of an asset. It was developed by Donald Lambert and first published in Commodities magazine (now Futures) in 1980. Despite its name, the CCI can be used in any market and is not just for commodities. The CCI compares current price to average price over a specific time period. The indicator fluctuates above or below zero, moving into positive or negative territory. While most values, approximately 75%, fall between -100 and +100, about 25% of the values fall outside this range, indicating a lot of weakness or strength in the price movement. The CCI was originally developed to spot long-term trend changes but has been adapted by traders for use on all markets or timeframes. Trading with multiple timeframes provides more buy or sell signals for active traders. Traders often use the CCI on the longer-term chart to establish the dominant trend and on the shorter-term chart to isolate pullbacks and generate trade signals. CCI is calculated with the following formula: (Typical Price - Simple Moving Average) / (0.015 x Mean Deviation) Some trading strategies based on CCI can produce multiple false signals or losing trades when conditions turn choppy. Implementing a stop-loss strategy can help cap risk, and testing the CCI strategy for profitability on your market and timeframe is a worthy first step before initiating trades. 2 — AVERAGE TRUE RANGE (ATR) The Average True Range (ATR) is a technical analysis indicator that measures market volatility by calculating the average range of price movements in a financial asset over a specific period of time. The ATR was developed by J. Welles Wilder Jr. and introduced in his book “New Concepts in Technical Trading Systems” in 1978. The ATR is calculated by taking the average of the true range over a specified period. The true range is the greatest of the following: The difference between the current high and the current low. The difference between the previous close and the current high. The difference between the previous close and the current low. The ATR can be used to set stop-loss orders. One way to use ATR for stop-loss orders is to multiply the ATR by a factor (such as 2 or 3) and subtract it from the entry price for long positions or add it to the entry price for short positions. This can help traders set stop-loss orders that are more adaptive to market volatility. 3 — EXPONENTIAL MOVING AVERAGE (EMA) The Exponential Moving Average (EMA) is a type of moving average (MA) that places a greater weight and significance on the most recent data points. The EMA is calculated by taking the average of the true range over a specified period. The true range is the greatest of the following: The difference between the current high and the current low. The difference between the previous close and the current high. The difference between the previous close and the current low. The EMA can be used by traders to produce buy and sell signals based on crossovers and divergences from the historical average. Traders often use several different EMA lengths, such as 10-day, 50-day, and 200-day moving averages. The formula for calculating EMA is as follows: Compute the Simple Moving Average (SMA). Calculate the multiplier for weighting the EMA. Calculate the current EMA using the following formula: EMA = Closing price x multiplier + EMA (previous day) x (1-multiplier) STRATEGY EXPLANATION 1 — INPUTS AND PARAMETERS The strategy uses the Commodity Channel Index (CCI) with additional options for an Exponential Moving Average (EMA), Take Profit (TP) and Stop Loss (SL). length : The period length for the CCI calculation. overbought : The overbought level for the CCI. When CCI crosses above this level, it may signal a potential short entry. oversold : The oversold level for the CCI. When CCI crosses below this level, it may signal a potential long entry. useEMA : A boolean input to enable or disable the use of Exponential Moving Average (EMA) as a filter for long and short entries. emaLength : The period length for the EMA if it is used. 2 — CCI CALCULATION The CCI indicator is calculated using the following formula: (src - ma) / (0.015 * ta.dev(src, length)) src is the typical price (average of high, low, and close) and ma is the Simple Moving Average (SMA) of src over the specified length. 3 — EMA CALCULATION If the useEMA option is enabled, an EMA is calculated with the given emaLength . 4 — TAKE PROFIT AND STOP LOSS METHODS The strategy offers two methods for TP and SL calculations: percentage-based and ATR-based. tpSlMethod_percentage : A boolean input to choose the percentage-based method. tpSlMethod_atr : A boolean input to choose the ATR-based method. 5 — PERCENTAGE-BASED TP AND SL If tpSlMethod_percentage is chosen, the strategy calculates the TP and SL levels based on a percentage of the average entry price. tp_percentage : The percentage value for Take Profit. sl_percentage : The percentage value for Stop Loss. 6 — ATR-BASED TP AND SL If tpSlMethod_atr is chosen, the strategy calculates the TP and SL levels based on Average True Range (ATR). atrLength : The period length for the ATR calculation. atrMultiplier : A multiplier applied to the ATR to set the SL level. riskRewardRatio : The risk-reward ratio used to calculate the TP level. 7 — ENTRY CONDITIONS The strategy defines two conditions for entering long and short positions based on CCI and, optionally, EMA. Long Entry: CCI crosses below the oversold level, and if useEMA is enabled, the closing price should be above the EMA. Short Entry: CCI crosses above the overbought level, and if useEMA is enabled, the closing price should be below the EMA. 8 — TP AND SL LEVELS The strategy calculates the TP and SL levels based on the chosen method and updates them dynamically. For the percentage-based method, the TP and SL levels are calculated as a percentage of the average entry price. For the ATR-based method, the TP and SL levels are calculated using the ATR value and the specified multipliers. 9 — EXIT CONDITIONS The strategy defines exit conditions for both long and short positions. If there is a long position, it will be closed either at TP or SL levels based on the chosen method. If there is a short position, it will be closed either at TP or SL levels based on the chosen method. Additionally, positions will be closed if CCI crosses back above oversold in long positions or below overbought in short positions. 10 — PLOTTING The script plots the CCI line along with overbought and oversold levels as horizontal lines. The CCI line is colored red when above the overbought level, green when below the oversold level, and white otherwise. The shaded region between the overbought and oversold levels is plotted as well.
Stratégie Pine Script®
par AliferCrypto
5
Quantitative Trend Strategy- Uptrend longTrend Strategy #1 Indicators: 1. SMA 2. Pivot high/low functions derived from SMA 3. Step lines to plot support and resistance based on the pivot points 4. If the close is over the resistance line, green arrows plot above, and vice versa for red arrows below support. Strategy: 1. Long Only 2. Mutable 2% TP/1.5% SL 3. 0.01% commission 4. When the close is greater than the pivot point of the sma pivot high, and the close is greater than the resistance step line, a long position is opened. *At times, the 2% take profit may not trigger IF; the conditions for reentry are met at the time of candle closure + no exit conditions have been triggered. 5. If the position is in the green and the support step line crosses over the resistance step line, positions are exited. How to use it and what makes it unique: Use this strategy to trade an up-trending market using a simple moving average to determine the trend. This strategy is meant to capture a good risk/reward in a bullish market while staying active in an appropriate fashion. This strategy is unique due to it's inclusion of the step line function with statistics derived from myself. This description tells the indicators combined to create a new strategy, with commissions and take profit/stop loss conditions included, and the process of strategy execution with a description on how to use it. If you have any questions feel free to PM me and boost if you enjoyed it. Thank you, pineUSERS!
Stratégie Pine Script®
par CheatCode1
Dynamic Trendline Break - Strategy [presentTrading]- Introduction and How It Is Different The Dynamic Trendline Break Strategy is a unique trading algorithm that leverages the power of trendlines and swing detection to identify potential trading opportunities. Unlike traditional trendline strategies that rely on static trendlines, this strategy dynamically calculates trendlines based on pivot highs and lows. This dynamic approach allows the strategy to adapt to changing market conditions (especially 24hr markets like Crypto) and potentially identify trading opportunities that static trendlines might miss. BTCUSD 6hr chart Tencent 700.HK 1D chart - Strategy, How It Works The strategy works by first identifying pivot highs and lows using a lookback period defined by the user. These pivot points are then used to calculate the slope of the trendlines. The slope calculation method can be chosen from three options: Average True Range (ATR), Standard Deviation (Stdev), or Linear Regression (Linreg), providing flexibility to the trader. Once the trendlines are calculated, the strategy identifies potential trading opportunities when the price crosses over the upper trendline (for long trades) or crosses under the lower trendline (for short trades). The strategy also allows the user to define the trade direction (Long, Short, or Both) and the stop loss method (Fixed or SuperTrend). - Trade Direction The trade direction parameter allows the user to define the direction of the trades that the strategy will take. If set to "Long", the strategy will only take long trades when the price crosses over the upper trendline. If set to "Short", the strategy will only take short trades when the price crosses under the lower trendline. If set to "Both", the strategy will take both long and short trades. - Usage To use this strategy, simply input your desired parameters for the swing detection lookback, slope, slope calculation method, trade direction, stop loss method, and stop loss level. Once these parameters are set, the strategy will automatically calculate the trendlines and identify potential trading opportunities based on the defined parameters. - Default Settings The default settings for the strategy are as follows: Swing Detection Lookback: 30 Slope: 0.618 Slope Calculation Method: ATR Trade Direction: Both Stop Loss Method: SuperTrend Stop Loss Level: 15% SuperTrend Factor: 3 SuperTrend Lookback: 21 These settings can be adjusted to suit your trading style and risk tolerance. Always remember to backtest any changes to the settings before live trading.
Stratégie Pine Script®
par PresentTrading
4
BTFD strategy [3min]Hello I would like to introduce a very simple strategy to buy lows and sell with minimal profit This strategy works very well in the markets when there is no clear trend and in other words, the trend going sideways this strategy works very well for stable financial markets like spx500, nasdaq100 and dow jones 30 two indicators were used to determine the best time to enter the market: volume + rsi values volume is usually the number of stocks or contracts traded over a certain period of time. Thus, it is an important indicator of market activity and liquidity. Each transaction constitutes an individual exchange between the buyer and the seller and constitutes the trading volume of a given instrument or asset. The RSI measures the strength of uptrends versus downtrends. The signal is the entry or exit of the indicator value of the oversold or overbought level of the market. It is assumed that a value below or equal 30 indicates an oversold level of the market, and an RSI value above or equal 70 indicates an overbought level. the strategy uses a maximum of 5 market entries after each candle that meets the condition uses 5 target point levels to close the position: tp1= 0.4% tp2= 0.6% tp3= 0.8% tp4= 1.0% tp5= 1.2% after reaching a given profit value, a piece of the position is cut off gradually, where tp5 closes 100% of the remaining position each time you enter a position, a stop loss of 5.0% is set, which is quite a high value, however, when buying each, sometimes very active downward price movement, you need a lot of space for market decisions in which direction it wants to go to determine the level of stop loss and target point I used a piece of code by RafaelZioni , here is the script from which a piece of code was taken this strategy is used for automation, however, I would recommend brokers that have the lowest commission values ​​when opening and closing positions, because the strategy generates very high commission costs Enjoy and trade safe ;)
Stratégie Pine Script®
par wielkieef
17
[EKIN] ATR Exit StrategyMy exit strategy to reduce risk via tracking price and ATR. Sets new STOP price based on how many ATR is current price above from the entry price. I only check 5 and 20 EMAs for entry strategy. I intentionally used a simple entry strategy to further test the impact of this exit strategy. First sets STOP at 1.5 ATR below the entry price. If there is a 2 ATR increase, pulls STOP to the entry point to eliminate the possibility of loss. If there is a 3 ATR increase, takes a 50% profit and moves STOP to 1 ATR above the entry price. If there is a 4 ATR increase, moves STOP to 2 ATR above the entry price. If there is a 5 ATR increase, moves STOP to 3 ATR above the entry price. . . . This is my first strategy attempt so I am open to any recommendations. I am planning to update this strategy overtime when I get better at pinescript and trading in general
Stratégie Pine Script®
par ekinbasarkomur
1
Master Trend ReversalThe 'Master Trend Reversal' strategy is an innovative approach to detecting trend reversals in the market. This strategy harnesses the power of 'Pin Bars', a specific type of candlestick, to pinpoint potential trading opportunities. Based on the properties of Pin Bars, this strategy identifies scenarios where the market is likely to reverse its trend. In particular, it seeks out Pin Bars that are significantly longer than their surrounding candles, a length determined by the 'Pin Bar Size (%)' parameter. When a bullish Pin Bar is detected (i.e., the closing price is lower than the opening price, and the gap between the opening and low prices exceeds the specified Pin Bar size), the strategy goes long. Conversely, upon identifying a bearish Pin Bar (the closing price is higher than the opening price, and the difference between the high and opening prices is greater than the specified Pin Bar size), the strategy goes short. Furthermore, 'Master Trend Reversal' incorporates an efficient risk management mechanism via stop-loss orders. The stop-loss level is calculated based on the average price of the position and the 'Stop Loss Percentage (%)' as specified by the user. Hence, the 'Master Trend Reversal' strategy offers a unique approach to capitalize on market trend reversals while limiting potential losses through the use of stop-loss orders. This combination of precise trend reversal detection and robust risk management makes this strategy particularly useful for traders seeking to maximize their profits while effectively controlling their risk exposure. Please remember that, like any trading strategy, 'Master Trend Reversal' does not guarantee success and should be used as part of a holistic risk management approach in the markets.
Stratégie Pine Script®
par Smart-Tradings
Blockunity Divinetrend (BDT)A formidable trend-following indicator, based on an ATR combined with a trailing stop mechanism. Divinetrend’s aim is to offer a simple and efficient alternative to Supertrend, another highly reputed indicator of the same type. It comes with a trading strategy that can be activated in its parameters. You can also change a number of design parameters. Divinetrend is pretty straightforward in its approach. It calculates a base moving average taking into account the asset’s volatility, multiplies it with an ATR, then displays a line representing a trailing stop. When a red line is broken, the asset is considered to be moving back into an uptrend. Inversely, when a green line is broken, a bearish signal is sent. In the parameters, you can also activate a trend contestation period. If this parameter is activated, the price must have been trending for at least 5 days for the trend change to be validated. Usage Advice We recommend that you do not use this indicator with a time unit of less than 2 hours. Ideally in 4 hours or daily, or even 3 days. Otherwise, there’s nothing special about the use of this indicator. We still recommend that you use your logarithmic chart for a better visualization, but this is optional. This indicator was designed in particular for the crypto market, but it also works on traditional market assets. The Different Signals Divinetrend gives buy and sell signals based on trailing stop line breaks and trend orientation. In particular, it can be used for trend identification and following. If the Contested Trend option is activated in the settings, the indicator will also display a contested period in blue. In this case, it is necessary to wait 5 days for the trend to be validated. Integrated Strategy In addition, a trading strategy is integrated into the Divinetrend indicator. This can be activated in the parameters. This is mainly there to see the results and the relevance of the indicator in the TradingView Strategy Tester. We do not recommend using it alone. As this strategy is used to study the indicator's performance, we use the following default parameters: An initial capital of 2,000 USDT with 100% of equity in order size. In other words, we'll bet the entire portfolio on each trade. To do this, we use a default stop loss of 10%, to avoid risking heavy losses. We also use a commission of 0.01% and a slippage of 3 ticks to reflect more reality.
Stratégie Pine Script®
par Blockunity
3
Volatility Capture RSI-Bollinger - Strategy [presentTrading]- Introduction and how it is different The 'Volatility Capture RSI-Bollinger - Strategy ' is a trading strategy that combines the concepts of Bollinger Bands (BB), Relative Strength Index (RSI), and Simple Moving Average (SMA) to generate trading signals. The uniqueness of this strategy is it calculates which is a dynamic level between the upper and lower Bollinger Bands based on the closing price. This unique feature allows the strategy to adapt to market volatility and price movements. The market in Crypto and Stock are highly volatile, making them suitable for a strategy that uses Bollinger Bands. The RSI can help identify overbought or oversold conditions in this often speculative market. BTCUSD 4hr chart (700.hk) 3hr chart Remember, the effectiveness of a trading strategy also depends on other factors such as the timeframe used, the specific settings of the indicators, and the overall market conditions. It's always recommended to backtest and paper trade a strategy before using it in live trading. - Strategy, How it Works Dynamic Bollinger Band: The strategy works by first calculating the upper and lower Bollinger Bands based on the user-defined length and multiplier. It then uses the Bollinger Bands and the closing price to dynamically adjust the presentBollingBand value. In the end, it generates a long signal when the price crosses over the present Bolling Band and a short signal when the price crosses under the present Bolling Band. RSI: If the user has chosen to use RSI for signals, the strategy also calculates the RSI and its SMA, and uses these to generate additional long and short signals. The RSI-based signals are only used if the 'Use RSI for signals' option is set to true. The strategy then checks the chosen trading direction and enters a long or short position accordingly. If the trading direction is set to 'Both', the strategy can enter both long and short positions. Finally, the strategy exits a position when the close price crosses under the present Bolling Band for a long position, or crosses over the present Bolling Band for a short position. - Trade direction The strategy also includes a trade direction parameter, allowing the user to choose whether to enter long trades, short trades, or both. This makes the strategy adaptable to different market conditions and trading styles. - Usage 1. Set the input parameters as per your trading preferences. You can choose the price source, the length of the moving average, the multiplier for the ATR, whether to use RSI for signals, the RSI and SMA periods, the bought and sold range levels, and the trading direction. 2. The strategy will then generate buy and sell signals based on these parameters. You can use these signals to enter and exit trades. - Default settings 1. Source: hlc3 2. Length: 50 3. Multiplier: 2.7183 4. Use RSI for signals: True 5. RSI Period: 10 6. SMA Period: 5 7. Bought Range Level: 55 8. Sold Range Level: 50 9. Trade Direction: Both - Strategy's default Properties 1. Default Quantity Type: 'strategy.percent_of_equity' 2. commission_value= 0.1, commission_type=strategy.commission.percent, slippage= 1: These parameters set the commission and slippage for the strategy. The commission is set to 0.1% of the trade value, and the slippage (the difference between the expected price of a trade and the price at which the trade is executed) is set to 1. 3. default_qty_type = strategy.percent_of_equity, default_qty_value = 15: These parameters set the default quantity for trades. The default_qty_type is set to strategy.percent_of_equity, which means that the size of each trade will be a percentage of the account equity. The default_qty_value is set to 15, which means that each trade will be 15% of the account equity. 4. initial_capital= 10000: This parameter sets the initial capital for the strategy to $10,000.
Stratégie Pine Script®
par PresentTrading
PresentTrend - Strategy [presentTrading]- Introduction and how it is different The PresentTrend strategy is a unique custom trend-following strategy. This combination allows the strategy to take advantage of both short-term and long-term market trends, making it suitable for various market conditions. BTCUSDT 4hr chart (700.hk) 3D chart - Strategy, How it Works RSI or MFI: The first part uses a custom indicator based on either the Relative Strength Index (RSI) or the Money Flow Index (MFI). The indicator calculates a PresentTrend value, which generates buy and sell signals based on its crossover and crossunder, indicating potential trend reversals. ATR: The second part is a popular trend-following indicator that uses the Average True Range (ATR). The strategy enters a long position when all buy signals from both strategies are true, and a short position when all sell signals are true. This ensures trades are entered when both short-term and long-term trends align, potentially increasing the strategy's reliability. - Trade direction The strategy also includes a trade direction parameter, allowing the user to choose whether to enter long trades, short trades, or both. This makes the strategy adaptable to different market conditions and trading styles. - Usage 1. Set the input parameters for the custom trend-following strategy. 2. Choose whether to use the RSI or MFI for the custom strategy. 3. Choose the trade direction: long, short, or both. 4. The strategy will generate buy and sell signals based on the conditions of both strategies. 5. Enter a trade when a buy or sell signal is generated, depending on the chosen trade direction. Please note that this strategy is meant to be a tool to aid in your trading decisions and not a standalone trading system. Always use proper risk management and make sure to test the strategy thoroughly before using it in live trading. - Default settings 1. Source: 'hlc3', a balanced price level for calculations. 2. Length: 14, a common setting for many technical indicators. 3. Multiplier: 1.618 (the golden ratio), used in calculating the upper and lower thresholds. 4. RSI or MFI: Set to use MFI by default, both are momentum indicators. 5. Trade Direction: 'Both', allowing for both long and short trades. The default settings are designed to provide a balanced approach to trend detection. However, these can be adjusted based on the user's preferences and the specific characteristics of the market being traded. - Strategy's default Properties 1. Default Quantity Type: 'strategy.percent_of_equity' 2. commission_value= 0.1, commission_type=strategy.commission.percent, slippage= 1: These parameters set the commission and slippage for the strategy. The commission is set to 0.1% of the trade value, and the slippage (the difference between the expected price of a trade and the price at which the trade is executed) is set to 1. 3. default_qty_type = strategy.percent_of_equity, default_qty_value = 10: These parameters set the default quantity for trades. The default_qty_type is set to strategy.percent_of_equity, which means that the size of each trade will be a percentage of the account equity. The default_qty_value is set to 10, which means that each trade will be 10% of the account equity. 4. initial_capital= 10000: This parameter sets the initial capital for the strategy to $10,000.
Stratégie Pine Script®
par PresentTrading
Bollinger Bands Modified (Stormer)This strategy is based and shown by trader and investor Alexandre Wolwacz "Stormer". Overview The strategy uses two indicators Bollinger Bands and EMA (optional for EMA). Calculates Bollinger Bands, EMA, highest high, and lowest low values based on the input parameters, evaluating the conditions to determine potential long and short entry signals. The conditions include checks for crossovers and crossunders of the price with the upper and lower Bollinger Bands, as well as the position of the price relative to the EMA. The script also incorporates the option to add an inside bar pattern check for additional information. Entry Position Long Position: Price cross over the superior band of bollinger bands. The EMA is used to add support for trend analysis, it is an optional input, when used, it checks if price is above EMA. Short Position: Price cross under the inferior band of bollinger bands. The EMA is used to add support for trend analysis, it is an optional input, when used, it checks if price is under EMA. Risk Management Stop Loss: The stop loss is calculated based on the input highest high (for short position) and lowest low (for long position). It gets the length based on the input from the last candles to set which is the highest high and which is the lowest low. Take Profit: According to the author, the profit target should be at least 1:1.6 the risk, so to have the strategy mathematically positive. The profit target is configured input, can be increased or decreased. It calculates the take profit based on the price of the stop loss with the profit target input.
Stratégie Pine Script®
par AugustoErni
ATR GOD Strategy by TradeSmart (PineConnector-compatible)This is a highly-customizable trading strategy made by TradeSmart, focusing mainly on ATR-based indicators and filters. The strategy is mainly intended for trading forex , and has been optimized using the Deep Backtest feature on the 2018.01.01 - 2023.06.01 interval on the EUR/USD (FXCM) 15M chart, with a Slippage value of 3, and a Commission set to 0.00004 USD per contract. The strategy is also made compatible with PineConnector , to provide an easy option to automate the strategy using a connection to MetaTrader. See tooltips for details on how to set up the bot, and check out our website for a detailed guide with images on how to automate the strategy. The strategy was implemented using the following logic: Entry strategy: A total of 4 Supertrend values can be used to determine the entry logic. There is option to set up all 4 Supertrend parameters individually, as well as their potential to be used as an entry signal/or a trend filter. Long/Short entry signals will be determined based on the selected potential Supertrend entry signals, and filtered based on them being in an uptrend/downtrend (also available for setup). Please use the provided tooltips for each setup to see every detail. Exit strategy: 4 different types of Stop Losses are available: ATR-based/Candle Low/High Based/Percentage Based/Pip Based. Additionally, Force exiting can also be applied, where there is option to set up 4 custom sessions, and exits will happen after the session has closed. Parameters of every indicator used in the strategy can be tuned in the strategy settings as follows: Plot settings: Plot Signals: true by default, Show all Long and Short signals on the signal candle Plot SL/TP lines: false by default, Checking this option will result in the TP and SL lines to be plotted on the chart. Supertrend 1-4: All the parameters of the Supertrends can be set up here, as well as their individual role in the entry logic. Exit Strategy: ATR Based Stop Loss: true by default ATR Length (of the SL): 100 by default ATR Smoothing (of the SL): RMA/SMMA by default Candle Low/High Based Stop Loss: false by default, recent lowest or highest point (depending on long/short position) will be used to calculate stop loss value. Set 'Base Risk Multiplier' to 1 if you would like to use the calculated value as is. Setting it to a different value will count as an additional multiplier. Candle Lookback (of the SL): 50 by default Percentage Based Stop Loss: false by default, Set the stop loss to current price - % of current price (long) or price + % of current price (short). Percentage (of the SL): 0.3 by default Pip Based Stop Loss: Set the stop loss to current price - x pips (long) or price + x pips (short). Set 'Base Risk Multiplier' to 1 if you would like to use the calculated value as is. Setting it to a different value will count as an additional multiplier. Pip (of the SL): 10 by default Base Risk Multiplier: 4.5 by default, the stop loss will be placed at this risk level (meaning in case of ATR SL that the ATR value will be multiplied by this factor and the SL will be placed that value away from the entry level) Risk to Reward Ratio: 1.5 by default, the take profit level will be placed such as this Risk/Reward ratio is met Force Exiting: 4 total Force exit on custom session close options: none applied by default. If enabled, trades will close automatically after the set session is closed (on next candle's open). Base Setups: Allow Long Entries: true by default Allow Short Entries: true by default Order Size: 10 by default Order Type: Capital Percentage by default, allows adjustment on how the position size is calculated: Cash: only the set cash amount will be used for each trade Contract(s): the adjusted number of contracts will be used for each trade Capital Percentage: a % of the current available capital will be used for each trade ATR Limiter: Use ATR Limiter: true by default, Only enter into any position (long/short) if ATR value is higher than the Low Boundary and lower than the High Boundary. ATR Limiter Length: 50 by default ATR Limiter Smoothing: RMA/SMMA by default High Boundary: 1000 by default Low Boundary: 0.0003 by default MA based calculation: ATR value under MA by default, If not Unspecified, an MA is calculated with the ATR value as source. Only enter into position (long/short) if ATR value is higher/lower than the MA. MA Type: RMA/SMMA by default MA Length: 400 by default Waddah Attar Filter: Explosion/Deadzone relation: Not specified by default, Explosion over Deadzone: trades will only happen if the explosion line is over the deadzone line; Explosion under Deadzone: trades will only happen if the explosion line is under the deadzone line; Not specified: the opening of trades will not be based on the relation between the explosion and deadzone lines. Limit trades based on trends: Not specified by default, Strong Trends: only enter long if the WA bar is colored green (there is an uptrend and the current bar is higher then the previous); only enter short if the WA bar is colored red (there is a downtrend and the current bar is higher then the previous); Soft Trends: only enter long if the WA bar is colored lime (there is an uptrend and the current bar is lower then the previous); only enter short if the WA bar is colored orange (there is a downtrend and the current bar is lower then the previous); All Trends: only enter long if the WA bar is colored green or lime (there is an uptrend); only enter short if the WA bar is colored red or orange (there is a downtrend); Not specified: the color of the WA bar (trend) is not relevant when considering entries. WA bar value: Not specified by default, Over Explosion and Deadzone: only enter trades when the WA bar value is over the Explosion and Deadzone lines; Not specified: the relation between the explosion/deadzone lines to the value of the WA bar will not be used to filter opening trades. Sensitivity: 150 by default Fast MA Type: SMA by default Fast MA Length: 10 by default Slow MA Type: SMA Slow MA Length: 20 by default Channel MA Type: EMA by default BB Channel Length: 20 by default BB Stdev Multiplier: 2 by default Trend Filter: Use long trend filter 1: false by default, Only enter long if price is above Long MA. Show long trend filter 1: false by default, Plot the selected MA on the chart. TF1 - MA Type: EMA by default TF1 - MA Length: 120 by default TF1 - MA Source: close by default Use short trend filter 1: false by default, Only enter long if price is above Long MA. Show short trend filter 1: false by default, Plot the selected MA on the chart. TF2 - MA Type: EMA by default TF2 - MA Length: 120 by default TF2 - MA Source: close by default Volume Filter: Only enter trades where volume is higher then the volume-based MA: true by default, a set type of MA will be calculated with the volume as source, and set length MA Type: RMA/SMMA by default MA Length: 200 by default Date Range Limiter: Limit Between Dates: false by default Start Date: Jan 01 2023 00:00:00 by default End Date: Jun 24 2023 00:00:00 by default Session Limiter: Show session plots: false by default, show market sessions on chart: Sidney (red), Tokyo (orange), London (yellow), New York (green) Use session limiter: false by default, if enabled, trades will only happen in the ticked sessions below. Sidney session: false by default, session between: 15:00 - 00:00 (EST) Tokyo session: false by default, session between: 19:00 - 04:00 (EST) London session: false by default, session between: 03:00 - 11:00 (EST) New York session: false by default, session between: 08:00 - 17:00 (EST) Trading Time: Limit Trading Time: true by default, tick this together with the options below to enable limiting based on day and time Valid Trading Days Global: 123567 by default, if the Limit Trading Time is on, trades will only happen on days that are present in this field. If any of the not global Valid Trading Days is used, this field will be neglected. Values represent days: Sunday (1), Monday (2), ..., Friday (6), Saturday(7) To trade on all days use: 123457 (1) Valid Trading Days: false, 123456 by default, values represent days: Sunday (1), Monday (2), ..., Friday (6), Saturday(7) The script will trade on days that are present in this field. Please make sure that this field and also (1) Valid Trading Hours Between is checked (1) Valid Trading Hours Between: false, 1800-2000 by default, hours between which the trades can happen. The time is always in the exchange's timezone All other options are also disabled by default PineConnector Automation: Use PineConnector Automation: false by default, In order for the connection to MetaTrader to work, you will need do perform prerequisite steps, you can follow our full guide at our website, or refer to the official PineConnector Documentation. To set up PineConnector Automation on the TradingView side, you will need to do the following: 1. Fill out the License ID field with your PineConnector License ID; 2. Fill out the Risk (trading volume) with the desired volume to be traded in each trade (the meaning of this value depends on the EA settings in Metatrader. Follow the detailed guide for additional information); 3. After filling out the fields, you need to enable the 'Use PineConnector Automation' option (check the box in the strategy settings); 4. Check if the chart has updated and you can see the appropriate order comments on your chart; 5. Create an alert with the strategy selected as Condition, and the Message as {{strategy.order.comment}} (should be there by default); 6. Enable the Webhook URL in the Notifications section, set it as the official PineConnector webhook address and enjoy your connection with MetaTrader. License ID: 60123456789 by default Risk (trading volume): 1 by default NOTE! Fine-tuning/re-optimization is highly recommended when using other asset/timeframe combinations.
Stratégie Pine Script®
par TradeSmart22
9
Volume-Weighted Supertrend Strategy [wbburgin]This is a script that can be used as a strategy or a standalone indicator. The Volume-Weighted Supertrend is a supertrend based on a rolling VWAP, instead of a normal price source. The strategy has two components - a supertrend based off of this VWAP (shown on the chart) and a supertrend from volume itself (not plotted on the chart directly). The supertrend from volume is an example of my "Supertrend Any Source" indicator, where a custom ATR is created from non-OHLC data; this is available as both a separate public script and also in my "wbburgin_utils" library for you to use in your own script creation. The supertrend from volume acts as a confirmation filter for the VWAP-supertrend shown on-chart. If the volume supertrend is trending up and the VWAP-based supertrend is also trending up, a buy signal is generated. Likewise, if the volume supertrend is trending down and the VWAP-supertrend is trending down, a sell signal is generated. The colors are based off of whether both supertrends are trending up or down: green for both up, blue for only price up, orange for only price down, and red for both down. The settings enable you to change the volume length and the ATR length separately, as well as the multiplier and the source for the price supertrend. If you load the indicator for the first time and see no entries and exits, this is because "Show Strategy Entries and Exits" is disabled in the settings. This is if you plan on using the strategy as an indicator and don't want to be bothered by the entry and exit symbols on the chart. Additionally, for those who like clean charts (like me), you can turn all the labels off in the settings, as well as the highlighting. My default strategy settings for the strategy results shown below are as follows: 5% equity per trade, 5 degrees of pyramiding, commissions of 0.08% per trade. This strategy doesn't come with stops yet, so please be aware of that before using it to trade - I highly suggest you create your own stops based off of your R/R ratio and personal risk tolerance. Additionally, it works best on trending assets (b/c of the supertrends) with high volume. This might mean it does not work as well on lower timeframes.
Stratégie Pine Script®
par wbburgin
4
[SMT] Buy & Sell Renko Based - StrategyThis is a custom indicator that implements a trading strategy based on Renko charts, but they can be used on regular candlestick charts and on any time frame. Renko charts are known for filtering market noise and displaying price movements in a clearer way. However, it is important to note that this indicator is provided for educational and informational purposes only and is not a guarantee of profitable returns. Features: - The indicator uses Renko charts to generate buy and sell signals. - Renko bricks are built based on a predefined price variation, rather than time. - The length of the Average True Range (ATR) used to calculate Renko bricks can be customized. - Buy signals are generated when the price crosses below the current Renko brick. - Sell signals are generated when the price crosses above the current Renko brick. - Entry points are marked with "Buy" and "Sell" arrows on the chart. It is essential to emphasize that no indicator or trading strategy guarantees profitable results. The financial market is complex and subject to unpredictable changes. It is recommended to perform additional tests and analysis before using this indicator on a real trading account. Always remember to manage your risks properly and consider other factors such as fundamental analysis and market conditions when making trading decisions. The use of this indicator is entirely the user's responsibility. DISCLAIMER: This indicator is not financial advice and should not be interpreted as such. Always consult with a qualified financial professional before making any investment decisions.
Stratégie Pine Script®
par SMTraderTradingCrypto
14