Commencez

Moyenne mobile de Hull (HMA)

HEMA - A Fast And Efficient Estimate Of The Hull Moving AverageIntroduction The Hull moving average (HMA) developed by Alan Hull is one of the many moving averages that aim to reduce lag while providing effective smoothing. The HMA make use of 3 linearly weighted (WMA) moving averages, with respective periods p/2 , p and √p , this involve three convolutions, which affect computation time, a more efficient version exist under the name of exponential Hull moving average (EHMA), this version make use of exponential moving averages instead of linearly weighted ones, which dramatically decrease the computation time, however the difference with the original version is clearly noticeable. In this post an efficient and simple estimate is proposed, the estimation process will be fully described and some comparison with the original HMA will be presented. This post and indicator is dedicated to LucF Estimation Process Estimating a moving average is easier when we look at its weights (represented by the impulse response), we basically want to find a similar set of weights via more efficient calculations, the estimation process is therefore based on fully understanding the weighting architecture of the moving average we want to estimate. The impulse response of an HMA of period 20 is as follows : We can see that the first weights increases a bit before decaying, the weights then decay, cross under 0 and increase again. More recent closing price values benefits of the highest weights, while the oldest values have negatives ones, negative weighting is what allow to drastically reduce the lag of the HMA. Based on this information we know that our estimate will be a linear combination of two moving averages with unknown coefficients : a × MA1 + b × MA2 With a > 0 and b < 0 , the lag of MA1 is lower than the lag of MA2 . We first need to capture the general envelope of the weights, which has an overall non-linearly decaying shape, therefore the use of an exponential moving average might seem appropriate. In orange the impulse response of an exponential moving average of period p/2 , that is 10. We can see that such impulse response is not a bad estimate of the overall shape of the HMA impulse response, based on this information we might perform our linear combination with a simple moving average : 2EMA(p/2) + -1SMA(p) this gives the following impulse response : As we can see there is a clear lack of accuracy, but because the impulse response of a simple moving is a constant we can't have the short increasing weights of the HMA, we therefore need a non-constant impulse response for our linear combination, a WMA might be appropriate. Therefore we will use : 2WMA(p/2) + -1EMA(p/2) Note that the lag a WMA is inferior to the lag of an EMA of same period, this is why the period of the WMA is p/2 . We obtain : The shape has improved, but the fit is poor, which mean we should change our coefficients, more precisely increasing the coefficient of the WMA (thus decreasing the one of the EMA). We will try : 3WMA(p/2) + -2EMA(p/2) We then obtain : This estimate seems to have a decent fit, and this linear combination is therefore used. Comparison HMA in blue and the estimate in fuchsia with both period 50, the difference can be noted, however the estimate is relatively accurate. In the image above the period has been set to 200. Conclusion In this post an efficient estimate of the HMA has been proposed, we have seen that the HMA can be estimated via the linear combinations of a WMA and an EMA of each period p/2 , this isn't important for the EMA who is based on recursion but is however a big deal for the WMA who use recursion, and therefore p indicate the number of data points to be used in the convolution, knowing that we use only convolution and that this convolution use twice less data points then one of the WMA used in the HMA is a pretty great thing. Subtle tweaking of the coefficients/moving averages length's might help have an even more accurate estimate, the fact that the WMA make use of a period of √p is certainly the most disturbing aspect when it comes to estimating the HMA. I also described more in depth the process of estimating a moving average. I hope you learned something in this post, it took me quite a lot of time to prepare, maybe 2 hours, some pinescripters pass an enormous amount of time providing content and helping the community, one of them being LucF, without him i don't think you'll be seeing this indicator as well as many ones i previously posted, I encourage you to thank him and check his work for Pinecoders as well as following him. Thanks for reading !
Indicateur Pine Script™
par alexgrover
14
Colored Moving Averages Can Help You Spot TrendsMoving averages are perhaps the most popular indicator in technical analysis. But sometimes they're not the easiest to interpret. This indicator helps you see the trend by coloring the MA based on its direction. It's green when rising and red when falling. Of course, you can easily change that in the Style tab under Settings. Color MA also lets you select from five different types of moving averages, including simple, exponential and Hull. We've included a list for easy reference below. Just change the "AvgType" on the Input tab under Settings. This chart of Facebook shows the 20-day simple moving average. Notice how swings often marked turns in the stock price. AvgType codes: 1 - Simple Moving Average 2 - Exponential Moving Average 3 - Hull Moving Average 4 - Weighted Moving Average 5 - Volume Weighted Moving Average
Indicateur Pine Script™
par TradeStation
9
SSL HybridThis script is designed for the NNFX Method, so it is recommended for Daily charts only. Tried to implement a few VP NNFX Rules This script has a SSL / Baseline (you can choose between the SSL or MA), a secondary SSL for continiuation trades and a third SSL for exit trades. Alerts added for Baseline entries, SSL2 continuations, Exits. Baseline has a Keltner Channel setting for "in zone" Gray Candles Added "Candle Size > 1 ATR" Diamonds from my old script with the criteria of being within Baseline ATR range. Credits go to: Strategy causecelebre www.tradingview.com SSL Channel ErwinBeckers www.tradingview.com Moving Averages jiehonglim www.tradingview.com Moving Averages everget www.tradingview.com "Many Moving Averages" script Fractured www.tradingview.com
Indicateur Pine Script™
par Mihkel00
454
Volume Effectiveness [BigBitsIO]This Volume Effectiveness indicator is designed to allow users to try and identify how effective volume is on each candle, and smoothing those values over time to try to find trends. Volume Effectiveness is the % change in price for each single unit of volume on the associated candle. The value can be positive or negative, but there is an option to just monitor an absolute value. Features: - Volume Effectiveness - Toggle if Volume Effectiveness should be an absolute value - Toggle visibility of bars - Smoothed moving average of Volume Effectiveness - Adjustable period on the smoothed moving average - Several moving average types available to use for the smoothed moving average - Toggle visibility of smoothed moving average
Indicateur Pine Script™
par BigBitsIO
5
Layout Padrao_HULL Version This layout was inspired by the Andre Machado´s Tabajara set of rules. The adaptation are the following: -Usage of Hull Average instead of simple moving average -Usage of 2 Averages instead of just one -Implementation of a "transition zone" Average Candle Color p1 // p2 // Prior > // > // > Set Color 1 > // > // < Set in your layout settings color (down candle) > // < // > Set Color A1 > // < // < Set Color A2 < // > // > Set Color A1 < // > // < Set Color A2 < // < // > Set in your layout settings color (up candle) < // < // < Set Color 2 The A1 // A2 colors are for the transition zone. Either the average 1 or the average 2 will be lower than the previous average. This is a way to show how both averages are developing without having to look at 2 additional lines, making the layout more clear (at least, for me). Feel free to comment PS: Thank you for all the people who have implemented Machado´s work in pine editor
Indicateur Pine Script™
par limapedro1982
1
Baseline - evoPlots the high and low of your chosen moving average. Options are: SMA = Simple Moving Average EMA = Exponential Moving Average WMA = Weighted Moving Average HMA = Hull Moving Average VWMA = Volume Weighted Moving Average RMA = Exponetial Weighted Moving Average ALMA = Arnaud Legoux Moving Average Unbox "Use Current Timeframe" to use chosen timeframe below I mainly use this to get in and out of the market for futures trading, to reduce fake outs of having just one moving average line. Let me know if you like it.. Inspired from LazyBear's EMAenvelope :)
Indicateur Pine Script™
par EvoCrypto
5
Scripting Tutorial 9 - TManyMA Strategy - Long Market Order OnlyThis script is for a triple moving average strategy where the user can select from different types of moving averages, price sources, lookback periods and resolutions. Features: - 3 Moving Averages with variable MA types, periods, price sources, resolutions and the ability to disable each individually - Crossovers are plotted on the chart with detailed information regarding the crossover (Ex: 50 SMA crossed over 200 SMA ) - Forecasting available for all three MAs. MA values are forecasted 5 values out and plotted as if a continuation to the MA. - Forecast bias also applies to all forecasting. Bias means we can forecast based on an anticipated bullish, bearish or neutral direction in the market. - To understand bias, please read the source code, or if you can't read the code just send me a message on here or Twitter. Twitter should be linked to my profile. - Ribbons added and on by default. Optional setting to disable the ribbons. 5 ribbons between MA1 and MA2 and another 5 between MA2 and MA3. - Ribbons are alpha-color coded based on their relation to their default MAs. - Ribbons are only visible between MAs if the MAs being compared share the same Type, Resolution, and Source because there is no way to consolidate those three in a simple manner. - Ribbon values are calculated based on calculated MA Periods between the MAs. - Converted the existing study into a strategy - Strategy only enters long positions with a market order when MA crossovers occur - Strategy exits positions when crossunders occur - Trades 100% of the equity with one order/position by default - Ability to disable trading certain crosses with input checks This script is meant as an educational script with well-formatted styling, and references for specific functions. *** PLEASE NOTE - THIS STRATEGY IS MEANT FOR LEARNING PURPOSES. DEPENDING ON IT'S CONFIGURATION IT MAY OR MAY NOT BE USEFUL FOR ACTUAL TRADING. THE STRATEGY IS NOT FINANCIAL ADVICE ***
Stratégie Pine Script™
par BigBitsIO
BTCBOT2Watches 3 Symbols with separate timeframe control, with Hull Moving Average crossovers on each, DXY XAU/USD BTC/USD and a daily candle crossover. With StopLoss and Target Price and Backtesting history selection control. Entry and Exit rules visible in script (script open) So if DXY chart is going down and Gold chart going up and Bitcoin chart going up then it will enter a buy, yes it is watching more than just bitcoin itself. it needs HMA to match on all 3 charts and with selected timeframes, the timeframe of users chart, the timeframe in settings for the HMA's on the symbols. Also a Daily Candle chart of the users selected chart (symbol)
Stratégie Pine Script™
par SeaSide420
14