Commencez

Moyennes mobiles

High-Probability Scalper (Market Open)Market open is where volatility is real, spreads are tight, and momentum shows itself early. This scalping strategy is built specifically to operate during that window, filtering out low-quality signals that usually appear later in the session. Instead of trading all day, the logic is restricted to the first 90 minutes after market open, where continuation moves and fast pullbacks are more reliable. What This Strategy Does This script looks for short-term momentum alignment using: Fast vs slow EMA structure RSI confirmation to avoid chasing extremes ATR-based risk control Session-based filtering to trade only when volume matters It’s designed for intraday scalping, not swing trading. Core Trading Logic 1. Market Open Filter Trades are allowed only between 09:30 – 11:00 exchange time. This avoids low-liquidity chop and focuses on the period where most breakouts and reversals form. 2. Trend Confirmation Bullish bias: 9 EMA crosses above 21 EMA Bearish bias: 9 EMA crosses below 21 EMA This keeps trades aligned with short-term direction instead of random entries. 3. Momentum Check (RSI) RSI is used as a quality filter, not as an overbought/oversold signal. Long trades only when RSI is strong but not extended Short trades only when RSI shows weakness without exhaustion This removes late entries and reduces whipsaws. Entries & Exits Entries Executed only on confirmed candles No intrabar repainting One position at a time Risk Management Stop-loss based on ATR Take-profit calculated using a fixed risk–reward ratio Same structure for both long and short trades This keeps risk consistent across different symbols and volatility levels. Why This Strategy Works Better at Market Open Volume is highest False breakouts are fewer EMA crosses have follow-through RSI behaves more cleanly By not trading all day, the strategy avoids most of the noise that kills scalpers. Best Use Cases Index futures High-liquidity stocks Major crypto pairs during active sessions 1m to 5m timeframes What This Strategy Is NOT Not a martingale Not grid-based Not designed for ranging markets Not a “set and forget” system It’s a controlled scalping template meant for disciplined execution. How to Use It Properly Test on multiple symbols Adjust ATR length for volatility Tune RSI ranges per market Always forward-test before live alerts Final Note This strategy focuses on structure, timing, and risk, not indicator stacking. If you trade the open, this gives you a clear framework instead of emotional entries. If you want: Alerts Session customization News filters Partial exits You can extend this logic without breaking the core system.
Stratégie Pine Script®
par AIScripts
A-Share Broad-Based ETF Dual-Core Timing System1. Strategy Overview The "A-Share Broad-Based ETF Dual-Core Timing System" is a quantitative trading strategy tailored for the Chinese A-share market (specifically for broad-based ETFs like CSI 300, CSI 500, STAR 50). Recognizing the market's characteristic of "short bulls, long bears, and sharp bottoms," this strategy employs a "Left-Side Latency + Right-Side Full Position" dual-core driver. It aims to safely bottom-fish during the late stages of a bear market and maximize profits during the main ascending waves of a bull market. 2. Core Logic A. Left-Side Latency (Rebound/Bottom Fishing) Capital Allocation: Defaults to 50% position. Philosophy: "Buy when others fear." Seeks opportunities in extreme panic or momentum divergence. Entry Signals (Triggered by any of the following): Extreme Panic: RSI Oversold (<30) + Price below Bollinger Lower Band + Bullish Candle Close (Avoid catching falling knives). Oversold Bias: Price deviates more than 15% from the 60-day MA (Life Line), betting on mean reversion. MACD Bullish Divergence: Price makes a new low while MACD histogram does not, accompanied by strengthening momentum. B. Right-Side Full Position (Trend Following) Capital Allocation: Aggressively scales up to Full Position (~99%) upon signal trigger. Philosophy: "Follow the trend." Strike heavily once the trend is confirmed. Entry Signals (All must be met): Upward Trend: MACD Golden Cross + Price above 20-day MA. Breakout Confirmation: CCI indicator breaks above 100, confirming a main ascending wave. Volume Support: Volume MACD Golden Cross, ensuring price increase is backed by volume. C. Smart Risk Control Bear Market Exhaustion Exit: In a bearish trend (MA20 < MA60), the strategy does not "hold and hope." It immediately liquidates left-side positions upon signs of rebound exhaustion (breaking below MA20, touching MA60 resistance, or RSI failure). ATR Trailing Stop: Uses Average True Range (ATR) to calculate a dynamic stop-profit line that rises with the price to lock in profits. Hard Stop Loss: Forces a stop-loss if the left-side bottom fishing fails and losses exceed a set ATR multiple, preventing deep drawdowns. 3. Recommendations Target Assets: High liquidity broad-based ETFs such as CSI 300 ETF (510300), CSI 500 ETF (510500), ChiNext ETF (159915), STAR 50 ETF (588000). Timeframe: Daily Chart.
Stratégie Pine Script®
par RTA-Odysseus
CryptoFlux Dynamo [JOAT]CryptoFlux Dynamo: Velocity Scalping Strategy This Pine Script v6 strategy is designed for cryptocurrency markets operating on 5-minute and faster timeframes. It combines volatility regime detection, multi-path signal confirmation, and adaptive risk management to identify momentum-based trading opportunities in perpetual futures markets. Core Design Principles The strategy addresses three challenges specific to cryptocurrency trading: 24/7 market operation without session boundaries requires continuous monitoring and execution logic Volatility regimes shift rapidly, demanding adaptive stop and target calculations Tick-level responsiveness is critical for capturing momentum moves before they complete Strategy Architecture 1. Signal Generation Stack The strategy uses multiple technical indicators calibrated for cryptocurrency momentum: MACD with parameters 8/21/5 (fast/slow/signal) optimized for crypto acceleration phases EMA ribbon using 8/21/34 periods with slope analysis to assess trend structure Volume impulse detection combining SMA baseline, standard deviation, and z-score filtering RSI (21 period) and MFI (21 period) for momentum confirmation Bollinger Bands and Keltner Channels for squeeze detection 2. Volatility Regime Classification The strategy normalizes ATR as a percentage of price and classifies market conditions into three regimes: Compression (< 0.8% ATR): Reduced position sizing, tighter stops (1.05x ATR), lower profit targets (1.6x ATR) Expansion (0.8% - 1.6% ATR): Standard risk parameters, balanced risk-reward (1.55x stop, 2.05x target) Velocity (> 1.6% ATR): Wider stops (2.1x ATR), amplified targets (2.8x ATR), tighter trailing offsets ATR is calculated over 21 periods and smoothed with a 13-period EMA to reduce noise from wicks. 3. Multi-Path Entry System Four independent signal pathways contribute to a composite strength score (0-100): Trend Break (30 points): Requires EMA ribbon alignment, positive slope, and structure breakout above/below recent highs/lows Momentum Surge (30 points): MACD histogram exceeds adaptive baseline, MACD line crosses signal, RSI/MFI above/below thresholds, with volume impulse confirmation Squeeze Release (25 points): Bollinger Bands compress inside Keltner Channels, then release with momentum bias Micro Pullback (15 points): Shallow retracements within trend structure that reset without breaking support/resistance Additional scoring modifiers: Volume impulse: +5 points when present, -5 when absent Regime bonus: +5 in velocity, -2 in compression Cycle bias: +5 when aligned, -5 when counter-trend Trades only execute when the composite score reaches the minimum threshold (default: 55) and all filters agree. 4. Risk Management Framework Position sizing is calculated from: RiskCapital = Equity × (riskPerTradePct / 100) StopDistance = ATR × StopMultiplier(regime) Quantity = min(RiskCapital / StopDistance, MaxExposure / Price) The strategy includes: Risk per trade: 0.65% of equity (configurable) Maximum exposure: 12% of equity (configurable) Regime-adaptive stop and target multipliers Adaptive trailing stops based on ATR and regime Kill switch that disables new entries after 6.5% drawdown Momentum fail-safe exits when MACD polarity flips or ribbon structure breaks 5. Additional Filters Cycle Oscillator : Measures price deviation from 55-period EMA. Requires cycle bias alignment (default: ±0.15%) before entry BTC Dominance Filter : Optional filter using CRYPTOCAP:BTC.D to reduce long entries during risk-off periods (rising dominance) and short entries during risk-on periods Session Filter : Optional time-based restriction (disabled by default for 24/7 operation) Strategy Parameters All default values used in backtesting: Core Controls Enable Short Structure: true Restrict to Session Window: false Execution Session: 0000-2359:1234567 (24/7) Allow Same-Bar Re-Entry: true Optimization Constants MACD Fast Length: 8 MACD Slow Length: 21 MACD Signal Length: 5 EMA Fast: 8 EMA Mid: 21 EMA Slow: 34 EMA Slope Lookback: 8 Structure Break Window: 9 Regime Intelligence ATR Length: 21 Volatility Soothing: 13 Low Vol Regime Threshold: 0.8% ATR High Vol Regime Threshold: 1.6% ATR Cycle Bias Length: 55 Cycle Bias Threshold: 0.15% BTC Dominance Feed: CRYPTOCAP:BTC.D BTC Dominance Confirmation: true Signal Pathways Volume Baseline Length: 34 Volume Impulse Multiplier: 1.15 Volume Z-Score Threshold: 0.5 MACD Histogram Smoothing: 5 MACD Histogram Sensitivity: 1.15 RSI Length: 21 RSI Momentum Trigger: 55 MFI Length: 21 MFI Momentum Trigger: 55 Squeeze Length: 20 Bollinger Multiplier: 1.5 Keltner Multiplier: 1.8 Squeeze Release Momentum Gate: 1.0 Micro Pullback Depth: 7 Minimum Composite Signal Strength: 55 Risk Architecture Risk Allocation per Trade: 0.65% Max Exposure: 12% of Equity Base Risk/Reward Anchor: 1.8 Stop Multiplier • Low Regime: 1.05 Stop Multiplier • Medium Regime: 1.55 Stop Multiplier • High Regime: 2.1 Take Profit Multiplier • Low Regime: 1.6 Take Profit Multiplier • Medium Regime: 2.05 Take Profit Multiplier • High Regime: 2.8 Adaptive Trailing Engine: true Trailing Offset Multiplier: 0.9 Quantity Granularity: 0.001 Kill Switch Drawdown: 6.5% Strategy Settings Initial Capital: $100,000 Commission: 0.04% (0.04 commission_value) Slippage: 1 tick Pyramiding: 1 (no position stacking) calc_on_every_tick: true calc_on_order_fills: true Visualization Features The strategy includes: EMA ribbon overlay (8/21/34) with customizable colors Regime-tinted background (compression: indigo, expansion: purple, velocity: magenta) Dynamic bar coloring based on signal strength divergence Signal labels for entry points On-chart dashboard displaying regime, ATR%, signal strength, position status, stops, targets, and risk metrics Recommended Usage Timeframes The strategy is optimized for 5-minute charts. It can operate on 3-minute and 1-minute timeframes for faster scalping, or 15-minute for swing confirmation. When using higher timeframes, consider: Increasing structure lookback windows Raising RSI trigger thresholds above 58 to filter noise Extending volume baseline length Markets Designed for high-liquidity cryptocurrency perpetual futures: BTC/USDT, BTC/USD perpetuals ETH perpetuals Major L1 tokens with sufficient volume For thinner order books, increase volume impulse multiplier and adjust quantity granularity to match exchange minimums. Limitations and Compromises Backtesting Considerations TradingView strategy backtesting does not replicate broker execution. Actual fills, slippage, and commissions may differ The strategy uses calc_on_every_tick=true and calc_on_order_fills=true to reduce bar-close distortions, but real execution still depends on broker infrastructure At least 200 historical bars are required to stabilize regime classification, volume baselines, and cycle context Market Structure Dependencies BTC dominance feed ( CRYPTOCAP:BTC.D ) may lag during low-liquidity periods or weekends. Consider disabling the filter if data quality degrades Volume impulse detection assumes consistent order book depth. During extreme volatility or exchange issues, volume signatures may be unreliable Regime classification based on ATR percentage assumes normal volatility distributions. During black swan events, regime thresholds may not adapt quickly enough Parameter Sensitivity Default parameters are tuned for BTC/ETH perpetuals on 5-minute charts. Different assets or timeframes require recalibration The composite signal strength threshold (55) balances selectivity vs. opportunity. Higher values reduce false signals but may miss valid setups Risk per trade (0.65%) and max exposure (12%) are conservative defaults. Aggressive scaling increases drawdown risk Execution Constraints Same-bar re-entry requires broker support for rapid order placement Quantity granularity must match exchange contract minimums Kill switch drawdown (6.5%) may trigger during normal volatility cycles, requiring manual reset Performance Expectations This strategy is a framework for momentum-based cryptocurrency trading. Performance depends on: Market conditions (trending vs. ranging) Exchange execution quality Parameter calibration for specific assets Risk management discipline Backtest results shown in publications reflect specific market conditions and parameter sets. Past performance does not indicate future results. Always forward test with paper trading or broker simulation before deploying live capital. Code Structure The strategy is organized into functional sections: Configuration groups for parameter organization Helper functions for position sizing and normalization Core indicator calculations (MACD, EMA, ATR, RSI, MFI, volume analytics) Regime classification logic Multi-path signal generation and composite scoring Entry/exit orchestration with risk management Visualization layer with dashboard and chart elements The source code is open and can be modified to suit your trading requirements. Everyone is encouraged to understand the logic before deploying and to test thoroughly in their target markets. Modification Guidelines When adapting this strategy: Document any parameter changes in your publication Test modifications across different market regimes Validate position sizing logic for your exchange's contract specifications Consider exchange-specific limitations (funding rates, liquidation mechanics, order types) Conclusion This strategy provides a structured approach to cryptocurrency momentum trading with regime awareness and adaptive risk controls. It is not a guaranteed profit system, but rather a framework that requires understanding, testing, and ongoing calibration to market conditions. You should thoroughly understand the logic, test extensively in their target markets, and manage risk appropriately. The strategy's effectiveness depends on proper parameter tuning, reliable execution infrastructure, and disciplined risk management. Disclaimer This script and its documentation are for educational and informational purposes only. They do not constitute financial advice, investment recommendations, or trading advice of any kind. Trading cryptocurrencies and derivatives involves substantial risk of loss and is not suitable for all investors. Past performance, whether real or indicated by backtesting, does not guarantee future results. This strategy is provided "as is" without any warranties or guarantees of profitability You should not rely solely on this strategy for making trading decisions Always conduct your own research and analysis before making any financial decisions Consider consulting with a qualified financial advisor before engaging in trading activities The authors and contributors are not responsible for any losses incurred from using this strategy Cryptocurrency trading can result in the loss of your entire investment Only trade with capital you can afford to lose Use this strategy at your own risk. The responsibility for any trading decisions and their consequences lies entirely with you.
Stratégie Pine Script®
par officialjackofalltrades
Liquidity Maxing [JOAT]Liquidity Maxing - Institutional Liquidity Matrix Introduction Liquidity Maxing is an open-source strategy for TradingView built around institutional market structure concepts. It identifies structural shifts, evaluates trades through multi-factor confluence, and implements layered risk controls. The strategy is designed for swing trading on 4-hour timeframes, focusing on how institutional order flow manifests in price action through structure breaks, inducements, and liquidity sweeps. Core Functionality Liquidity Maxing performs three primary functions: Tracks market structure to identify when control shifts between buyers and sellers Scores potential trades using an eight-factor confluence system Manages position sizing and risk exposure dynamically based on volatility and user-defined limits The goal is selective trading when multiple conditions align, rather than frequent entries. Market Structure Engine The structure engine tracks three key events: Break of Structure (BOS): Price pushes beyond a prior pivot in the direction of trend Change of Character (CHoCH): Control flips from bullish to bearish or vice versa Inducement Sweeps (IDM): Market briefly runs stops against trend before moving in the real direction The structure module continuously updates strong highs and lows, labeling structural shifts visually. IDM markers are optional and disabled by default to maintain chart clarity. The trade engine requires valid structure alignment before considering entries. No structure, no trade. Eight-Factor Confluence System Instead of relying on a single indicator, Liquidity Maxing uses an eight-factor scoring system: Structure alignment with current trend RSI within healthy bands (different ranges for up and down trends) MACD momentum agreement with direction Volume above adaptive baseline Price relative to main trend EMA Session and weekend filter (configurable) Volatility expansion/contraction via ATR shifts Higher-timeframe EMA confirmation Each factor contributes one point to the confluence score. The default minimum confluence threshold is 6 out of 8, but you can adjust this from 1-8 based on your preference for trade frequency versus selectivity. Only when structure and confluence agree does the strategy proceed to risk evaluation. Dynamic Risk Management Risk controls are implemented in multiple layers: ATR-based stops and targets with configurable risk-to-reward ratio (default 2:1) Volatility-adjusted position sizing to maintain consistent risk per trade as ranges expand or compress Daily and weekly risk budgets that halt new entries once thresholds are reached Correlation cooldown to prevent clustered trades in the same direction Global circuit breaker with maximum drawdown limit and emergency kill switch If any guardrail is breached, the strategy will not open new positions. The dashboard clearly displays risk state for transparency. Market Presets The strategy includes configuration presets optimized for different market types: Crypto (BTC/ETH): RSI bands 70/30, volume multiplier 1.2, enhanced ATR scaling Forex Majors: RSI bands 75/25, volume multiplier 1.5 Indices (SPY/QQQ): RSI bands 70/30, volume multiplier 1.3 Custom: Default values for user customization For crypto assets, the strategy automatically applies ATR volatility scaling to account for higher volatility characteristics. Monitoring and Dashboards The strategy includes optional monitoring layers: Risk Operations Dashboard (top-right): Trend state Confluence score ATR value Current position size percentage Global drawdown Daily and weekly risk consumption Correlation guard state Alert mode status Performance Console (top-left): Net profit Current equity Win rate percentage Average trade value Sharpe-style ratio (rolling 50-bar window) Profit factor Open trade count Optional risk tint on chart background provides visual indication of "safe to trade" versus "halted" state. All visualization elements can be toggled on/off from the inputs for clean chart viewing or full telemetry during parameter tuning. Alerts and Automation The strategy supports alert integration with two formats: Standard alerts: Human-readable messages for long, short, and risk-halt conditions Webhook format: JSON-formatted payloads ready for external execution systems (optional) Alert messages are predictable and unambiguous, suitable for manual review or automated forwarding to execution engines. Built-in Validation Suite The strategy includes an optional validation layer that can be enabled from inputs. It checks: Internal consistency of structure and confluence metrics Sanity and ordering of risk parameters Position sizing compliance with user-defined floors and caps This validation is optional and not required for trading, but provides transparency into system operation during development or troubleshooting. Strategy Parameters Market Presets: Configuration Preset: Choose between Crypto (BTC/ETH), Forex Majors, Indices (SPY/QQQ), or Custom Market Structure Architecture: Pivot Length: Default 5 bars Filter by Inducement (IDM): Default enabled Visualize Structure: Default enabled Structure Lookback: Default 50 bars Risk & Capital Preservation: Risk:Reward Ratio: Default 2.0 ATR Period: Default 14 ATR Multiplier (Stop): Default 2.0 Max Drawdown Circuit Breaker: Default 10% Risk per Trade (% Equity): Default 1.5% Daily Risk Limit: Default 6% Weekly Risk Limit: Default 12% Min Position Size (% Equity): Default 0.25% Max Position Size (% Equity): Default 5% Correlation Cooldown (bars): Default 3 Emergency Kill Switch: Default disabled Signal Confluence: RSI Length: Default 14 Trend EMA: Default 200 HTF Confirmation TF: Default Daily Allow Weekend Trading: Default enabled Minimum Confluence Score (0-8): Default 6 Backtesting Considerations When backtesting this strategy, consider the following: Commission: Default 0.05% (adjustable in strategy settings) Initial Capital: Default $100,000 (adjustable) Position Sizing: Uses percentage of equity (default 2% per trade) Timeframe: Optimized for 4-hour charts, though can be tested on other timeframes Results will vary significantly based on: Market conditions and volatility regimes Parameter settings, especially confluence threshold Risk limit configuration Symbol characteristics (crypto vs forex vs equities) Past performance does not guarantee future results. Win rate, profit factor, and other metrics should be evaluated in context of drawdown periods, trade frequency, and market conditions. How to Use This Strategy This is a framework that requires understanding and parameter tuning, not a one-size-fits-all solution. Recommended workflow: Start on 4-hour timeframe with default parameters and appropriate market preset Run backtests and study performance console metrics: focus on drawdown behavior, win rate, profit factor, and trade frequency Adjust confluence threshold to match your risk appetite—higher thresholds mean fewer but more selective trades Set realistic daily and weekly risk budgets appropriate for your account size and risk tolerance Consider ATR multiplier adjustments based on market volatility characteristics Only connect alerts or automation after thorough testing and parameter validation Treat this as a risk framework with an integrated entry engine, not merely an entry signal generator. The risk controls are as important as the trade signals. Strategy Limitations Designed for swing trading timeframes; may not perform optimally on very short timeframes Requires sufficient market structure to identify pivots; may struggle in choppy or low-volatility environments Crypto markets require different parameter tuning than traditional markets Risk limits may prevent entries during favorable setups if daily/weekly budgets are exhausted Correlation cooldown may delay entries that would otherwise be valid Backtesting results depend on data quality and may not reflect live trading with slippage Design Philosophy Many indicators tell you when price crossed a moving average or RSI left oversold. This strategy addresses questions institutional traders ask: Who is in control of the market right now? Is this move structurally significant or just noise? Do I want to add more risk given what I've already done today/week? If I'm wrong, exactly how painful can this be? The strategy provides disciplined, repeatable answers to these questions through systematic structure analysis, confluence filtering, and multi-layer risk management. Technical Implementation The strategy uses Pine Script v6 with: Custom types for structure, confluence, and risk state management Functional programming approach for reusable calculations State management through persistent variables Optional visual elements that can be toggled independently The code is open-source and can be modified to suit individual needs. All important logic is visible in the source code. Disclaimer This script is provided for educational and informational purposes only. It is not intended as financial, investment, trading, or any other type of advice or recommendation. Trading involves substantial risk of loss and is not suitable for all investors. Past performance, whether real or indicated by historical tests of strategies, is not indicative of future results. No representation is being made that any account will or is likely to achieve profits or losses similar to those shown. In fact, there are frequently sharp differences between backtested results and actual results subsequently achieved by any particular trading strategy. The user should be aware of the risks involved in trading and should trade only with risk capital. The authors and publishers of this script are not responsible for any losses or damages, including without limitation, any loss of profit, which may arise directly or indirectly from use of or reliance on this script. This strategy uses technical analysis methods and indicators that are not guaranteed to be accurate or profitable. Market conditions change, and strategies that worked in the past may not work in the future. Users should thoroughly test any strategy in a paper trading environment before risking real capital. Commission and slippage settings in backtests may not accurately reflect live trading conditions. Real trading results will vary based on execution quality, market liquidity, and other factors not captured in backtesting. The user assumes full responsibility for all trading decisions made using this script. Always consult with a qualified financial advisor before making investment decisions. Enjoy - officialjackofalltrades
Stratégie Pine Script®
par officialjackofalltrades
EMA and Dow Theory Strategies V2📘 Overview This strategy is an advanced evolution of the original EMA × Dow Theory hybrid model. V2 introduces true swing‑based trend detection, gradient trend‑zones, higher‑timeframe swing overlays, and dynamic exit logic designed for intraday to short‑term trading across crypto, forex, stocks, and indices. The system provides precise entries, adaptive exits, and highly visual guidance that helps traders understand trend structure at a glance. 🧠 Key Features 🔹 1. Dual‑EMA Trend Logic (Symbol + External Index) Both the chart symbol and an external index (OTHERS.D) are evaluated using fast/slow EMAs to determine correlation‑based trend bias. 🔹 2. Dow Theory Swing Detection (Real‑time) The script identifies swing highs/lows and updates trend direction when price breaks them. This creates a structural trend model that reacts faster than EMAs alone. 🔹 3. Gradient Trend Zones (Visual Trend Strength) When trend is up or down, the area between price and the latest swing level is filled with a multi‑step gradient. This makes trend strength and distance-to-structure visually intuitive. 🔹 4. Higher‑Timeframe Swing Trend (htfTrend) Swing highs/lows from a higher timeframe (e.g., 4H) are plotted to show macro structure. Used only for visual context, not for filtering entries. 🔹 5. RSI‑Based Entry Protection RSI prevents entries during extreme overbought/oversold conditions. 🔹 6. Dynamic Exit System Includes: Custom stop‑loss (%) Partial take‑profit (TP1/TP2/TP3) Automatic scale‑out when trend color weakens “Color‑change lockout” to prevent immediate re‑entry Real‑time PnL tracking and labels 🔹 7. Alerts for All Key Events Entry, stop‑loss, partial exits, and trend‑change exits all generate structured JSON alerts. 🔹 8. Visual PnL Labels & Equity Tracking PnL for the latest trade is displayed directly on the chart, including scale‑out adjustments. ⚙️ Input Parameters Parameter Description Fast EMA / Slow EMA EMAs used for symbol trend detection Index Fast / Slow EMA EMAs applied to external index StopLoss (%) Custom stop‑loss threshold Scale‑Out % Portion to exit when trend color weakens RSI Period / Levels Overbought/oversold filters Swing Detection Length Bars used to detect swing highs/lows Stats Display Position of statistics table 🧭 About htfTrend (Higher Timeframe Trend) The higher‑timeframe swing trend is displayed visually but not used for entry logic. Why? Strict HTF filtering reduces trade frequency and often removes profitable setups. By keeping it visual‑only, traders retain flexibility while still benefiting from macro structure awareness. Use it as a contextual guide, not a constraint. 📘 概要 本ストラテジーは、V1 を大幅に拡張した EMA × ダウ理論 × スイング構造 × 上位足トレンド可視化 の複合型モデルです。 短期〜デイトレード向けに最適化されており、仮想通貨・FX・株式・指数など幅広いアセットで利用できます。 V2 では、スイング構造の自動検出、グラデーションによるトレンド強度の可視化、上位足スイングライン、動的な利確/損切りロジック が追加され、視覚的にもロジック的にも大幅に強化されています。 🧠 主な機能 🔹 1. 銘柄＋外部インデックスの EMA クロス判定 対象銘柄と OTHERS.D の EMA を比較し、相関を考慮したトレンド方向を判定します。 🔹 2. ダウ理論に基づくスイング高値・安値の自動検出 スイング更新によりトレンド方向を切り替える、構造ベースのトレンド判定を採用。 🔹 3. グラデーション背景によるトレンド強度の可視化 スイングラインから現在価格までを段階的に塗り分け、 「どれだけトレンドが伸びているか」を直感的に把握できます。 🔹 4. 上位足スイングトレンド（htfTrend）の表示 4H などの上位足でのスイング高値・安値を表示し、 大局的なトレンド構造を視覚的に把握できます（ロジックには未使用）。 🔹 5. RSI による過熱・売られすぎフィルター 極端な RSI 状態でのエントリーを防止。 🔹 6. 動的イグジットシステム カスタム損切り（％） TP1/TP2/TP3 の段階的利確 トレンド色の弱まりによる自動スケールアウト 色変化後の再エントリー制限（waitForColorChange） リアルタイム PnL の追跡とラベル表示 🔹 7. アラート完備（JSON 形式） エントリー、損切り、部分利確、トレンド反転などすべてに対応。 🔹 8. 損益ラベル・統計表示 直近トレードの損益をチャート上に表示し、視覚的に把握できます。 ⚙️ 設定項目 設定項目名 説明 Fast / Slow EMA 銘柄の EMA 設定 Index Fast / Slow EMA 外部インデックスの EMA 設定 損切り（％） カスタム損切りライン 部分利確割合 トレンド弱化時のスケールアウト割合 RSI 期間・水準 過熱/売られすぎフィルター スイング検出期間 スイング高値・安値の検出に使用 統計表示位置 テーブルの表示位置 🧭 上位足トレンド（htfTrend）について 上位足スイングの更新に基づくトレンド判定を表示しますが、 エントリー条件には使用していません。 理由： 上位足を厳密にロジックへ組み込むと、トレード機会が大幅に減るためです。 本ストラテジーでは、 「大局の把握は視覚で、エントリーは柔軟に」 という設計思想を採用しています。 → 裁量で利確判断や逆張り回避に活用できます。
Stratégie Pine Script®
par mm_mitsuya
Buy the dips StrategyThis strategy getting in long position only after the price drop- Buy the dips The % of the drop is Determined by SMA for the first trade The inputs of SMA and % of the drop can be adjust from the User After that Strategy start taking safe trades if not take profit from the first trade The safe trades are Determined by step down deviation % and by quantity There is no Stop loss is not for one with small tolerance to getting under if any question ask
Stratégie Pine Script®
par fullmax
2
Hybrid Trend-Following Inside Bar BreakoutHybrid Trend-Following Inside Bar Breakout Strategy The Hybrid Trend-Following Inside Bar Breakout Strategy is a rule-based trading system designed to capture strong directional moves while controlling risk during uncertain market conditions. It combines trend-following, price action, and volatility-based risk management into a single robust framework. Core Concept The strategy trades inside bar breakouts only in the direction of the dominant market trend. Inside bars represent periods of consolidation, and when price breaks out of this consolidation in a trending market, it often leads to impulsive moves with favorable risk–reward characteristics. Key Components 1. Trend Filter Uses 50 EMA and 200 EMA to define the market trend. Bullish bias: 50 EMA above 200 EMA Bearish bias: 50 EMA below 200 EMA This filter prevents counter-trend trades and improves trade quality. 2. Volatility Filter Compares fast ATR (14) with slow ATR (50). Trades are taken only when volatility is expanding or above a minimum threshold. This avoids low-volatility, choppy market conditions. 3. Inside Bar Breakout An inside bar forms when the current candle’s high is lower than the previous candle’s high and the low is higher than the previous candle’s low. A trade is triggered only when price breaks above or below the inside bar range in the direction of the trend. 4. Candle Quality Filter Requires a minimum body-to-range ratio, ensuring that the breakout candle has strong momentum and is not driven by weak wicks. Risk Management & Trade Management Stop Loss (SL) Placed using ATR-based dynamic stops, adapting to current market volatility. Prevents tight stops in volatile conditions and wide stops in calm markets. Partial Profit Taking 50% of the position is exited at 1.5R, locking in profits early. This reduces psychological pressure and improves equity stability. Trailing Stop After partial profit is taken, the remaining position is managed with an ATR-based trailing stop. Allows the strategy to capture large trend moves while protecting gains. Cooldown Mechanism After a losing trade, the system enters a cooldown period and skips a fixed number of bars. This helps avoid revenge trading and overtrading during unfavorable market phases. Why This Strategy Works Trades only high-probability breakouts in trending markets Adapts automatically to changing volatility Combines price action precision with systematic risk control Designed for consistent performance over long historical periods
Stratégie Pine Script®
par JeET369
[SM-021] Gaussian Trend System [Optimized]This script is a comprehensive trend-following strategy centered around a Gaussian Channel. It is designed to capture significant market movements while filtering out noise during consolidation phases. This version (v2) introduces code optimizations using Pine Script v6 Arrays and a new Intraday Time Control feature. 1. Core Methodology & Math The foundation of this strategy is the Gaussian Filter, originally conceptualized by @DonovanWall. Gaussian Poles: Unlike standard moving averages (SMA/EMA), this filter uses "poles" (referencing signal processing logic) to reduce lag while maintaining smoothness. Array Optimization: In this specific iteration, the f_pole function has been refactored to utilize Pine Script Arrays. This improves calculation efficiency and rendering speed compared to recursive variable calls, especially when calculating deep historical data. Channel Logic: The strategy calculates a "Filtered True Range" to create High and Low bands around the main Gaussian line. Long Entry: Price closes above the High Band. Short Entry: Price closes below the Low Band. 2. Signal Filtering (Confluence) To reduce false signals common in trend-following systems, the strategy employs a "confluence" approach using three additional layers: Baseline Filter: A 200-period (customizable) EMA or SMA acts as a regime filter. Longs are only taken above the baseline; Shorts only below. ADX Filter (Volatility): The Average Directional Index (ADX) is used to measure trend strength. If the ADX is below a user-defined threshold (default: 20), the market is considered "choppy," and new entries are blocked. Momentum Check: A Stochastic RSI check ensures that momentum aligns with the breakout direction. 3. NEW: Intraday Session Filter Per user requests, a time-based filter has been added to restrict trading activity to specific market sessions (e.g., the New York Open). How it works: Users can toggle a checkbox to enable/disable the filter. Configuration: You can define a specific time range (Default: 09:30 - 16:00) and a specific Timezone (Default: New York). Logic: The strategy longCondition and shortCondition now check if the current bar's timestamp falls within this window. If outside the window, no new entries are generated, though existing trades are managed normally. 4. Risk Management The strategy relies on volatility-based exits rather than fixed percentage stops: ATR Stop Loss: A multiple of the Average True Range (ATR) is calculated at the moment of entry to set a dynamic Stop Loss. ATR Take Profit: An optional Reward-to-Risk (RR) ratio can be set to place a Take Profit target relative to the Stop Loss distance. Band Exit: If the trend reverses and price crosses the opposite band, the trade is closed immediately to prevent large drawdowns. Credits & Attribution Original Gaussian Logic: Developed by @DonovanWalll. This script utilizes his mathematical formula for the pole filters. Strategy Wrapper & Array Refactor: Developed by @sebamarghella. Community Request: The Intraday Session Filter was added to assist traders focusing on specific liquidity windows. Disclaimer: This strategy is for educational purposes. Past performance is not indicative of future results. Please use the settings menu to adjust the Session Time and Risk parameters to fit your specific asset class.
Stratégie Pine Script®
par sebamarghella
MA Strategy: Dual Entry FilterConfigurable MA Dual-Filter Strategy This strategy is an enhanced and highly configurable Moving Average (MA) Crossover system designed to mitigate false signals and align trades with the prevailing market trend. It is built to offer traders granular control over entry criteria, elevating it beyond basic, built-in MA crossover indicators. Originality & Key Features The script's originality and utility lie in the combination of its two primary, optional filtering mechanics: Dual Entry Mode (Key Filter): Users can choose between two distinct methods for trade entry: Crossover (Classic): Immediate entry when the price crosses the main MA. Full Candle Confirmation (Unique Feature): This mode requires the entire candle body (open, high, low, and close) to be completely above or below the main MA after a crossover event to confirm the signal before entry. This strict confirmation helps to filter out weak crossovers, reducing whipsaws in choppy markets. Optional Trend Filter: A second, slower MA (Trend Filter MA) can be activated. Trades are only permitted when the faster main MA is aligned with the slower Trend MA (i.e., long only if main MA > Trend MA), ensuring trades are executed with the established higher-timeframe direction. How to Use the Strategy The strategy logic is built on simple MA principles but utilizes Pine Script's switch function to allow users to select from six different MA types for both the main signal and the trend filter: SMA, EMA, WMA, HMA, VWMA, and RMA. Core Logic: Signal: A cross of the price over the Main MA (filtered by the chosen Entry Mode). Directional Filter: The Trend Filter must confirm the direction (if enabled). Exit: Trades are exited on the opposite price crossover of the Main MA. Customizable Settings Include: Main MA Type & Length (Default: 40 EMA): The primary signal generator. Trend Filter MA Type & Length (Default: 70 EMA): The optional, slower trend bias. Entry Mode: Switch between Crossover or Full Candle Confirmation. Strategy Results and High-Risk Disclaimer The default setting for trade size is set to 40% of equity for backtesting demonstration purposes only. This high value is used to generate a large and diverse sample size of trades for historical review on the chart. This 40% value is NOT a recommended setting for live trading. Per TradingView guidelines, traders are strongly advised to change this input to a sustainable risk level, typically 5% to 10% of equity per trade. Past performance is not a guarantee of future results.
Stratégie Pine Script®
par ravi_matrix
ChronoPulse MS-MACD Resonance StrategyChronoPulse MS-MACD Resonance Strategy A systematic trading strategy that combines higher-timeframe market structure analysis with dual MACD momentum confirmation, ATR-based risk management, and real-time quality assurance monitoring. Core Principles The strategy operates on the principle of multi-timeframe confluence, requiring agreement between: Market structure breaks (CHOCH/BOS) on a higher timeframe Dual MACD momentum confirmation (classic and crypto-tuned profiles) Trend alignment via directional EMAs Volatility and volume filters Quality score composite threshold Strategy Components Market Structure Engine : Detects Break of Structure (BOS) and Change of Character (CHOCH) events using confirmed pivots on a configurable higher timeframe. Default structure timeframe is 240 minutes (4H). Dual MACD Fusion : Requires agreement between two MACD configurations: Classic MACD: 12/26/9 (default) Fusion MACD: 8/21/5 (default, optimized for crypto volatility) Both must agree on direction before trade execution. This can be disabled to use single MACD confirmation. Trend Alignment : Uses two EMAs for directional bias: Directional EMA: 55 periods (default) Execution Trend Guide: 34 periods (default) Both must align with trade direction. ATR Risk Management : All risk parameters are expressed in ATR multiples: Stop Loss: 1.5 × ATR (default) Take Profit: 3.0 × ATR (default) Trail Activation: 1.0 × ATR profit required (default) Trail Distance: 1.5 × ATR behind price (default) Volume Surge Filter : Optional gate requiring current volume to exceed a multiple of the volume SMA. Default threshold is 1.4× the 20-period volume SMA. Quality Score Gate : Composite score (0-1) combining: Structure alignment (0.0-1.0) Momentum strength (0.0-1.0) Trend alignment (0.0-1.0) ATR volatility score (0.0-1.0) Volume intensity (0.0-1.0) Default threshold: 0.62. Trades only execute when quality score exceeds this threshold. Execution Discipline : Trade budgeting system: Maximum trades per session: 6 (default) Cooldown bars between entries: 5 (default) Quality Assurance Console : Real-time monitoring panel displaying: Structure status (pass/fail) Momentum confirmation (pass/fail) Volatility readiness (pass/fail) Quality score (pass/fail) Discipline compliance (pass/fail) Performance metrics (win rate, profit factor) Net PnL Certification requires: Win Rate ≥ 40%, Profit Factor ≥ 1.4, Minimum 25 closed trades, and positive net profit. Integrity Suite : Optional validation panel that audits: Configuration sanity checks ATR data readiness EMA hierarchy validity Performance realism checks Strategy Settings strategy( title="ChronoPulse MS-MACD Resonance Strategy", shorttitle="ChronPulse", overlay=true, max_labels_count=500, max_lines_count=500, initial_capital=100000, currency=currency.USD, pyramiding=0, commission_type=strategy.commission.percent, commission_value=0.015, slippage=2, default_qty_type=strategy.percent_of_equity, default_qty_value=2.0, calc_on_order_fills=true, calc_on_every_tick=true, process_orders_on_close=true ) Key Input Parameters Structure Timeframe : 240 (4H) - Higher timeframe for structure analysis Structure Pivot Left/Right : 3/3 - Pivot confirmation periods Structure Break Buffer : 0.15% - Buffer for structure break confirmation MACD Fast/Slow/Signal : 12/26/9 - Classic MACD parameters Fusion MACD Fast/Slow/Signal : 8/21/5 - Crypto-tuned MACD parameters Directional EMA Length : 55 - Primary trend filter Execution Trend Guide : 34 - Secondary trend filter ATR Length : 14 - ATR calculation period ATR Stop Multiplier : 1.5 - Stop loss in ATR units ATR Target Multiplier : 3.0 - Take profit in ATR units Trail Activation : 1.0 ATR - Profit required before trailing Trail Distance : 1.5 ATR - Distance behind price Volume Threshold : 1.4× - Volume surge multiplier Quality Threshold : 0.62 - Minimum quality score (0-1) Max Trades Per Session : 6 - Daily trade limit Cooldown Bars : 5 - Bars between entries Win-Rate Target : 40% - Minimum for QA certification Profit Factor Target : 1.4 - Minimum for QA certification Minimum Trades for QA : 25 - Required closed trades Signal Generation Logic A trade signal is generated when ALL of the following conditions are met: Higher timeframe structure shows bullish (CHOCH/BOS) or bearish structure break Both MACD profiles agree on direction (if fusion enabled) Price is above both EMAs for longs (below for shorts) ATR data is ready and above minimum threshold Volume exceeds threshold × SMA (if volume gate enabled) Quality score ≥ quality threshold Trade budget available (under max trades per day) Cooldown period satisfied Risk Management Stop loss and take profit are set immediately on entry Trailing stop activates after 1.0 ATR of profit Trailing stop maintains 1.5 ATR distance behind highest profit point Position sizing uses 2% of equity per trade (default) No pyramiding (single position per direction) Limitations and Considerations The strategy requires sufficient historical data for higher timeframe structure analysis Quality gate may filter out many potential trades, reducing trade frequency Performance metrics are based on historical backtesting and do not guarantee future results Commission and slippage assumptions (0.015% + 2 ticks) may vary by broker The strategy is optimized for trending markets with clear structure breaks Choppy or ranging markets may produce false signals Crypto markets may require different parameter tuning than traditional assets Optimization Notes The strategy includes several parameters that can be tuned for different market conditions: Quality Threshold : Lower values (0.50-0.60) allow more trades but may reduce average quality. Higher values (0.70+) are more selective but may miss opportunities. Structure Timeframe : Use 240 (4H) for intraday trading, Daily for swing trading, Weekly for position trading Volume Gate : Disable for low-liquidity pairs or when volume data is unreliable Dual MACD Fusion : Disable for mean-reverting markets where single MACD may be more responsive Trade Discipline : Adjust max trades and cooldown based on your risk tolerance and market volatility Non-Repainting Guarantee All higher timeframe data requests use lookahead=barmerge.lookahead_off to prevent repainting. Pivot detection waits for full confirmation before registering structure breaks. All visual elements (tables, labels) update only on closed bars. Alerts Three alert conditions are available: ChronoPulse Long Setup : Fires when all long entry conditions are met ChronoPulse Short Setup : Fires when all short entry conditions are met ChronoPulse QA Certification : Fires when Quality Assurance console reaches CERTIFIED status Configure alerts with "Once Per Bar Close" delivery to match the non-repainting design. Visual Elements Structure Labels : CHOCH↑, CHOCH↓, BOS↑, BOS↓ markers on structure breaks Directional EMA : Orange line showing trend bias Trailing Stop Lines : Green (long) and red (short) trailing stop levels Dashboard Panel : Real-time status display (structure, MACD, ATR, quality, PnL) QA Console : Quality assurance monitoring panel Integrity Suite Panel : Optional validation status display Recommended Usage Forward test with paper trading before live deployment Monitor the QA console until it reaches CERTIFIED status Adjust parameters based on your specific market and timeframe Respect the trade discipline limits to avoid over-trading Review quality scores and adjust threshold if needed Use appropriate commission and slippage settings for your broker Technical Implementation The strategy uses Pine Script v6 with the following key features: Multi-timeframe data requests with lookahead protection Confirmed pivot detection for structure analysis Dynamic trailing stop management Real-time quality score calculation Trade budgeting and cooldown enforcement Comprehensive dashboard and monitoring panels All source code is open and available for review and modification. Disclaimer This script is for educational and informational purposes only. It is not intended as financial, investment, or trading advice. Past performance does not guarantee future results. Trading involves substantial risk of loss and is not suitable for all investors. Always conduct your own research and consult with a qualified financial advisor before making any trading decisions. The author and TradingView are not responsible for any losses incurred from using this strategy.
Stratégie Pine Script®
par officialjackofalltrades
Hyper Insight MA Strategy [Universal]Hyper Insight MA Strategy ** is a comprehensive trend-following engine designed for traders who require precision and flexibility. Unlike standard indicators that lock you into a single calculation method, this strategy serves as a "Universal Adapter," allowing you to **Mix & Match 13 different Moving Average types** for both the Fast and Slow trend lines independently. Whether you need the smoothness of T3, the responsiveness of HMA, or the classic reliability of SMA, this script enables you to backtest thousands of combinations to find the perfect edge for your specific asset class. --- 🔬 Deep Dive: Calculation Logic of Included MAs This strategy includes 13 distinct calculation methods. Understanding the math behind them will help you choose the right tool for your specific market conditions. #### 1. Standard Averages * **SMA (Simple Moving Average):** The unweighted mean of the previous $n$ data points. * *Logic:* Treats every price point in the period with equal importance. Good for identifying long-term macro trends but reacts slowly to recent volatility. * **WMA (Weighted Moving Average):** A linear weighted average. * *Logic:* Assigns heavier weight to current data linearly (e.g., $1, 2, 3... n$). It reacts faster than SMA but is still relatively smooth. * **SWMA (Symmetrically Weighted Moving Average):** * *Logic:* Uses a fixed-length window (usually 4 bars) with symmetrical weights $ $. It prioritizes the center of the recent data window. #### 2. Exponential & Lag-Reducing Averages * **EMA (Exponential Moving Average):** * *Logic:* Applies an exponential decay weighting factor. Recent prices have significantly more impact on the average than older prices, reducing lag compared to SMA. * **RMA (Running Moving Average):** Also known as Wilder's Smoothing (used in RSI). * *Logic:* It is essentially an EMA but with a slower alpha weight of $1/length$. It provides a very smooth, stable line that filters out noise effectively. * **DEMA (Double Exponential Moving Average):** * *Logic:* Calculated as $2 \times EMA - EMA(EMA)$. By subtracting the "lag" (the smoothed EMA) from the original EMA, DEMA provides a much faster reaction to price changes with less noise than a standard EMA. * **TEMA (Triple Exponential Moving Average):** * *Logic:* Calculated as $3 \times EMA - 3 \times EMA(EMA) + EMA(EMA(EMA))$. This effectively eliminates the lag inherent in single and double EMAs, making it an extremely fast-tracking indicator for scalping. #### 3. Advanced & Adaptive Averages * **HMA (Hull Moving Average):** * *Logic:* A composite formula involving Weighted Moving Averages: ASX:WMA (2 \times Integer(n/2)) - WMA(n)$. The result is then smoothed by a $\sqrt{n}$ WMA. * *Effect:* It eliminates lag almost entirely while managing to improve curve smoothness, solving the traditional trade-off between speed and noise. * **ZLEMA (Zero Lag Exponential Moving Average):** * *Logic:* This calculation attempts to remove lag by modifying the data source before smoothing. It calculates a "lag" value $(length-1)/2$ and applies an EMA to the data: $Source + (Source - Source )$. This creates a projection effect that tracks price tightly. * **T3 (Tillson T3 Moving Average):** * *Logic:* A complex smoothing technique that runs an EMA through a filter multiple times using a "Volume Factor" (set to 0.7 in this script). * *Effect:* It produces a curve that is incredibly smooth and free of "overshoot," making it excellent for filtering out market chop. * **ALMA (Arnaud Legoux Moving Average):** * *Logic:* Uses a Gaussian distribution (bell curve) to assign weights. It allows the user to offset the moving average (moving the peak of the weight) to align it perfectly with the price, balancing smoothness and responsiveness. * **LSMA (Least Squares Moving Average):** * *Logic:* Calculates the endpoint of a Linear Regression line for the lookback period. It essentially guesses where the price "should" be based on the best-fit line of the recent trend. * **VWMA (Volume Weighted Moving Average):** * *Logic:* Weights the closing price by the volume of that bar. * *Effect:* Prices on high volume days pull the MA harder than prices on low volume days. This is excellent for validating true trend strength (i.e., a breakout on high volume will move the VWMA significantly). --- ### 🛠 Features & Settings * **Universal Switching:** Change the `Fast MA` and `Slow MA` types instantly via the settings menu. * **Trend Cloud:** A dynamic background fill (Green/Red) highlights the crossover zone for immediate visual trend identification. * **Strategy Mode:** Built-in Backtesting logic triggers `LONG` entries when Fast MA crosses over Slow MA, and `EXIT` when Fast MA crosses under. ### ⚠️ Disclaimer This script is intended for educational and research purposes. The wide variety of MA combinations can produce vastly different results. Past performance is not indicative of future results. Please use proper risk management.
Stratégie Pine Script®
par waranyutrkm
XRP Non-Stop Strategy (TP 25% / SL 15%)XRP Non-Stop Strategy (TP 25% / SL 15%) is a continuous long-side trading system designed specifically for XRP. The strategy uses an EMA-based trend filter (EMA20/EMA50) to confirm bullish conditions before entering a long position. Each trade applies a fixed +25% Take Profit target and a −15% Stop Loss, calculated dynamically from the entry price. When a trade closes—whether by TP or SL—the strategy automatically re-enters on the next qualifying signal, enabling uninterrupted position cycling. Features include: • EMA-based trend confirmation • Dynamic TP/SL visualization on the chart • Clear BUY and EXIT markers • Dedicated alert conditions for automation
Stratégie Pine Script®
par antishyilma81
XRP Non-Stop Strategy (TP 25% / SL 15%)This strategy performs continuous automated trading exclusively on XRP. It opens long positions during favorable trend conditions, using a fixed Take Profit target of 25% above the entry price and a fixed Stop Loss of 15% below the entry. Once a trade is closed (either TP or SL), the strategy automatically re-enters on the next valid signal, enabling uninterrupted trading. The script includes: Dynamic Take Profit & Stop Loss lines Optional EMA trend filter Visual BUY and EXIT markers TradingView alerts for automation or notifications This strategy is built for traders who want a simple, price-action-driven system without fixed price levels, relying only on percentage-based movement from each entry.
Stratégie Pine Script®
par antishyilma81
Long Only EMA Strategy (9/20 with 200 EMA Filter)Details: This strategy is built around a very simple idea: follow the primary trend and enter only when momentum supports it. It uses three EMAs on a standard candlestick chart: 1. 9‑period EMA – short‑term momentum 2. 20‑period EMA – medium‑term structure 3. 200‑period EMA – long‑term trend filter The strategy is ** long‑only ** and is mainly designed for swing trading and positional trading. It avoids counter‑trend trades by taking entries only when price is trading ** above the 200 EMA **, which is commonly used as a long‑term trend reference. The rules are deliberately kept simple so that they are easy to understand, modify, and test on different markets and timeframes. --- Key Features 1. **Trend‑Filtered Entries** - Fresh long positions are considered only when: - The 9 EMA crosses above the 20 EMA - The closing price is **above** the 200 EMA - This attempts to combine short‑term momentum with a higher‑timeframe trend filter. 2. **Clean Exit Logic** - The long position is exited when the closing price crosses **below** the 20 EMA. - This creates an objective, rule‑based way to trail the trade as long as the medium‑term structure remains intact. 3. **Long‑Only, No Short Selling** - The script intentionally ignores short setups. - This makes it suitable for markets or accounts where short selling is restricted, or for traders who prefer to participate only on the long side of the market. 4. **Simple Visuals** - All three EMAs are plotted directly on the chart: - 9 EMA (fast) - 20 EMA (medium) - 200 EMA (trend) - Trade entries and exits are handled by TradingView’s strategy engine, so users can see results in the Strategy Tester as well as directly on the chart. 5. **Backtest‑Friendly Structure** - Uses TradingView’s built‑in `strategy()` framework. - Can be applied to different symbols, timeframes, and markets (equities, indices, crypto, etc.). - Works on standard candlestick charts, which are supported by TradingView’s backtesting engine. 6. **Configurable in Code** - The EMA periods are defined in the code and can be easily adjusted. - Users can tailor the parameters to fit their own style (for example, faster EMAs for intraday trading, slower EMAs for positional trades). --- How to Use 1. **Add the Strategy to Your Chart** 1. Open any symbol and select a **standard candlestick chart**. 2. Apply the strategy from your “My Scripts” section. 3. Make sure it is enabled so that the trades and results appear. 2. **Select Timeframe** - The logic can be tested on various timeframes: - Higher timeframes (1H, 4H, 1D) for swing and positional setups. - Lower timeframes (5m, 15m) for more active trading, if desired. - Users should experiment and see where the strategy behaves more consistently for their chosen market. 3. **Read the Signals** - **Entry:** - A long trade is opened when the 9 EMA crosses above the 20 EMA while the closing price is above the 200 EMA. - **Exit:** - The open long position is closed when the closing price crosses below the 20 EMA. - All orders are generated automatically once the strategy is attached to the chart. 4. **Use the Strategy Tester** - Go to the **Strategy Tester** tab in TradingView. - Check: - Net profit / drawdown - Win rate and average trade - List of trades and the equity curve - Change the date range and timeframe to see how stable the results are over different periods. 5. **Adjust Parameters if Needed** - Advanced users can open the code and experiment with: - EMA lengths (for example 8/21 with 200, or 10/30 with 200) - Risk sizing and capital settings within the `strategy()` call - Any changes should be thoroughly re‑tested before considering real‑world application. --- Practical Applications 1. **Swing Trading on Daily Charts** - Can be applied to stocks, indices, or ETFs on the daily timeframe. - The 200 EMA acts as a trend filter to stay aligned with the broad direction, while the 9/20 crossover helps catch medium‑term swings inside that trend. 2. **Positional Trades on Higher Timeframes** - On 4H or 1D charts, this approach can help in holding trades for several days to weeks. - The exit rule based on the 20 EMA crossing helps avoid emotional decisions and provides a rules‑based way to trail the trend. 3. **Trend‑Following Filter** - Even if used purely as a filter, the 200 EMA condition can help traders: - Avoid taking long trades when the market is in a clear downtrend. - Focus only on instruments that are trading above their long‑term average. 4. **Educational Use** - The script is intentionally kept straightforward so that newer users can: - Learn how a moving average crossover strategy works. - See how to combine a short‑term signal with a long‑term filter. - Understand how TradingView’s strategy engine handles entries and exits. 5. **Basis for Further Development** - This can serve as a starting point for more advanced systems. - Traders can extend it by adding: - Additional filters (RSI, volume, volatility filters, time‑of‑day filters, etc.) - Risk management rules (fixed stop loss, take profit, trailing stops). - The current version is kept minimal on purpose, so modifications are easy to implement and test. --- Important Notes & Disclaimer 1. This strategy is provided **for testing, research, and educational purposes only**. 2. It is ** not ** a recommendation to buy or sell any financial instrument. 3. Past performance on historical data does not guarantee similar results in live markets. 4. Markets are risky and trading can lead to financial loss; users should always do their own research, manage risk appropriately, and consult a qualified financial professional if needed. 5. Before using any strategy with real capital, it is strongly advised to: - Forward test it on a demo / paper trading account. - Check how it behaves during different market phases (trending, sideways, high‑volatility conditions). You are free to modify the parameters and logic to better align it with your own trading style and risk tolerance.
Stratégie Pine Script®
par growbharat2005
Strategy: HMA 50 + Supertrend SniperHMA 50 + Supertrend Confluence Strategy (Trend Following with Noise Filtering) Description: Introduction and Concept This strategy is designed to solve a common problem in trend-following trading: Lag vs. False Signals. Standard Moving Averages often lag too much, while price action indicators can generate false signals during choppy markets. This script combines the speed of the Hull Moving Average (HMA) with the volatility-based filtering of the Supertrend indicator to create a robust "Confluence System." The primary goal of this script is not just to overlay two indicators, but to enforce a strict rule where a trade is only taken when Momentum (HMA) and Volatility Direction (Supertrend) are in perfect agreement. Why this combination? (The Logic Behind the Mashup) Hull Moving Average (HMA 50): We use the HMA because it significantly reduces lag compared to SMA or EMA by using weighted calculations. It acts as our primary Trend Direction detector. However, HMA can be too sensitive and "whipsaw" during sideways markets. Supertrend (ATR-based): We use the Supertrend (Factor 3.0, Period 10) as our Volatility Filter. It uses Average True Range (ATR) to determine the significant trend boundary. How it Works (Methodology) The strategy uses a boolean logic system to filter out low-quality trades: Bullish Confluence: The HMA must be rising (Slope > 0) AND the Close Price must be above the Supertrend line (Uptrend). Bearish Confluence: The HMA must be falling (Slope < 0) AND the Close Price must be below the Supertrend line (Downtrend). The "Choppy Zone" (Noise Filter): This is a unique feature of this script. If the HMA indicates one direction (e.g., Rising) but the Supertrend indicates the opposite (e.g., Downtrend), the market is considered "Choppy" or indecisive. In this state, the script paints the candles or HMA line Gray and exits all positions (optional setting) to preserve capital. Visual Guide & Signals To make the script easy to interpret for traders who do not read Pine Script, I have implemented specific visual cues: Green Cross (+): Indicates a LONG entry signal. Both HMA and Supertrend align bullishly. Red Cross (X): Indicates a SHORT entry signal. Both HMA and Supertrend align bearishly. Thick Line (HMA): The main line changes color based on the trend. Green: Bullish Confluence. Red: Bearish Confluence. Gray: Divergence/Choppy (No Trade Zone). Thin Step Line: This is the Supertrend line, serving as your dynamic Trailing Stop Loss. Strategy Settings HMA Length: Default is 50 (Mid-term trend). ATR Factor/Period: Default is 3.0/10 (Standard for trend catching). Exit on Choppy: A toggle switch allowing users to decide whether to hold through noise or exit immediately when indicators disagree. Risk Warning This strategy performs best in trending markets (Forex, Crypto, Indices). Like all trend-following systems, it may experience drawdown during prolonged accumulation/distribution phases. Please backtest with your specific asset before using it with real capital.
Stratégie Pine Script®
par Gustav_Rex
3