False Breakdown Long Confirm (dropthoughcashin)// =============================================================================
// EN — Script Introduction
// Name: False Breakdown Long Confirm (dropthoughcashin)
// Timeframe: Designed for 5-minute charts (works on other TFs but tuned for 5m)
//
// What this script does:
// This indicator detects a “false breakdown” (liquidity sweep) below a support
// level, followed by a reclaim and a retest-hold confirmation. When confirmed,
// it prints a label and triggers the alert condition: dropthoughcashin.
//
// Core logic (3 steps):
// 1) Define the support level (Key Level):
// - Pivot mode: uses the latest confirmed pivot low as support.
// - Manual mode: uses your manually entered support level.
// 2) False breakdown + reclaim:
// - Price sweeps below support (low < support),
// - The sweep must be shallow (limited by ATR multiple or fixed points),
// - Then price reclaims: close back above the support.
// 3) Retest-hold confirmation (within N bars after reclaim):
// - Price retests near the support (low <= support + tolerance),
// - And closes at/above the support (hold),
// - If confirmed within the window, signal triggers once.
//
// Key parameters:
// - Max Penetration: filters out “deep breakdowns” you do NOT want.
// - Retest tolerance: how close price must retest the support.
// - Confirm within N bars: time limit to confirm after reclaim.
//
// Notes / Limitations:
// - Pivot support is lagging by design (pivot is confirmed after pLen bars).
// - This is a signal/alert tool, not a full trading strategy.
// =============================================================================
//
// 中文 — 脚本介绍
// 名称：False Breakdown Long Confirm（dropthoughcashin）
// 周期：主要为 5分钟K 设计（其他周期也能用，但默认参数以 5m 优化）
//
// 脚本作用：
// 本指标用于识别“假跌破（扫流动性/扫止损）”形态：价格先刺破支撑位，随后快速收回
// 并在短时间内回踩踩住，形成做多确认。确认后会在图上打标签，并触发提醒条件：
// dropthoughcashin。
//
// 核心逻辑（3步）：
// 1) 定义支撑位（Key Level）：
// - Pivot 模式：用最近确认的 pivot low（局部低点）作为支撑。
// - Manual 模式：用你手动输入的固定支撑价位。
// 2) 假跌破 + 收回（reclaim）：
// - 价格最低点刺破支撑（low < 支撑），
// - 但下穿幅度必须“浅”（用 ATR 倍数或固定点数限制），
// - 随后收盘重新站回支撑上方（close > 支撑）。
// 3) 回踩踩住确认（retest-hold）：
// - 在收回之后的 N 根K内，价格回踩到支撑附近（low <= 支撑 + 容忍），
// - 且收盘守住支撑（close >= 支撑），
// - 满足则触发一次信号与提醒。
//
// 关键参数说明：
// - Max Penetration（最大下穿深度）：过滤掉“下穿太深”的破位，避免误触发。
// - Retest tolerance（回踩容忍范围）：定义回踩要贴近支撑到什么程度。
// - Confirm within N bars（确认窗口）：收回后限定多少根K内必须完成回踩确认。
//
// 注意事项：
// - Pivot 支撑位天然滞后（需要 pLen 根K确认后才成立），属于“稳但晚”的设计。
// - 该脚本是信号/提醒工具，不是完整的交易策略（不包含止损止盈与仓位管理）。
Candlestick analysis
4H Previous Candle + FibonacciIndicator Description: 4H Previous Candle + Fibonacci
This Pine Script (v5) indicator is a technical analysis tool designed for traders using the
TradingView platform. It allows for the visualization of key levels from the previous 4-
hour candle directly on any lower time frame.
1. Primary Objective
The indicator aims to provide a Higher Time Frame (HTF) perspective automatically.
By plotting the high, low, and Fibonacci retracement levels of the last closed 4H
candle, it helps identify institutional support and resistance zones without the need to
constantly switch time frames.
2. Key Features
Feature Description
Automatic 4H Levels
Automatically plots horizontal lines for the High and Low of the
previous 4H candle.
Dynamic Adaptation
Line colors and styles adapt based on whether the candle was
bullish (green) or bearish (red).
Fibonacci
Retracements
Calculates and displays customizable Fibonacci levels (e.g., 23.6%,
38.2%, 50%, 61.8%, 78.6%).
Dashboard (HUD)
A summary table in the top-right corner displays exact values and
the candle type.
3. Technical Functionality
Data Retrieval (Multi-Timeframe)
The script uses the request.security function to extract data from the 4-hour time
frame (“240”). Using the index ensures the indicator is based on a closed candle,
eliminating any risk of “repainting” (levels changing during formation).
Fibonacci Calculation Logic
The calculation of Fibonacci levels is intelligent and directional:
Bullish Candle: The retracement is calculated from bottom to top (0% is at the
bottom).
Bearish Candle: The retracement is calculated from top to bottom (0% is at the
top).
4. Configuration Parameters
Users can customize the indicator via the settings menu:
Visual Settings: Toggle lines, adjust thickness, price labels, and decimal
precision.
Fibonacci Settings: Enable levels, choose colors, line thickness, and enter
custom retracement percentages.
5. Trading Use Cases
Bounce Zones: The 50% and 61.8% levels of the previous 4H candle are often
considered “Premium” or “Discount” zones where price tends to react.
Confluence: Use these levels alongside other indicators (RSI, moving averages)
to confirm entry points.
Risk Management: Place Stop Losses just beyond the previous 4H High or Low.
Document generated for the analysis of the “4H Previous Candle + Fibonacci” Pine
Script.
Smart Money Zones (FVG + OB) + MTF Trend Panel## Overview
Professional-grade institutional trading zones indicator that identifies **Fair Value Gaps (FVG)** and **Order Blocks (OB)** - key price inefficiencies where smart money operates. Includes a comprehensive **Multi-Timeframe Trend Panel** for complete market context at a glance.
## Core Features
### 🎯 Fair Value Gaps (FVG)
Fair Value Gaps occur when price moves so aggressively that it leaves an "imbalance" or "gap" in the market structure. These zones often act as magnets where price returns to find liquidity.
**Detection Logic:**
- **Bullish FVG**: When current candle's low is above the high of the candle 2 bars ago
- **Bearish FVG**: When current candle's high is below the low of the candle 2 bars ago
- Requires strong impulse candle (configurable body percentage threshold)
- Color-coded zones: Green for bullish, Red for bearish
### 📦 Order Blocks (OB)
Order Blocks represent the last opposite candle before a significant price move - the zone where institutional orders were placed before the breakout.
**Detection Logic:**
- Identifies the last bearish candle before a strong bullish breakout (Bullish OB)
- Identifies the last bullish candle before a strong bearish breakout (Bearish OB)
- Validates breakout strength using ATR multiplier (1.2x default)
- Color-coded zones: Blue for bullish, Orange for bearish
### 📊 Multi-Timeframe Trend Panel
Real-time trend analysis across **7 timeframes** displayed in an elegant dashboard:
- **1 Minute** - Ultra short-term scalping
- **5 Minutes** - Short-term momentum
- **15 Minutes** - Intraday swings
- **30 Minutes** - Session trends
- **1 Hour** - Multi-session trends
- **4 Hours** - Daily structure
- **Daily** - Long-term direction
**Visual Indicators:**
- 🟢 Green circle = Bullish trend
- 🔴 Red circle = Bearish trend
- Clean, professional table design with customizable position and size
## Intelligence Features
### 🧠 Zone Strength Rating
Every zone is automatically classified by strength based on size relative to ATR:
- **VERY STRONG** - 2.0x ATR or more (major institutional zones)
- **STRONG** - 1.5x to 2.0x ATR (significant zones)
- **MEDIUM** - 1.0x to 1.5x ATR (moderate zones)
- **WEAK** - Below 1.0x ATR (minor zones)
Strength rating helps you prioritize which zones to trade from!
### 📉 Smart Mitigation Tracking
Zones automatically track how much they've been "filled" or mitigated:
- Calculates penetration percentage as price enters the zone
- Zones turn **gray** when 50%+ mitigated or fully filled
- Option to **auto-delete** mitigated zones to keep chart clean
- Live zones extend dynamically with price action
### 🎨 Trend Filter (Optional)
When enabled, only shows zones aligned with the current trend:
- Uses customizable MA period (default 50)
- Bullish zones only appear in uptrend
- Bearish zones only appear in downtrend
- Reduces noise and false signals significantly
## Customization Options
### Display Settings
- Toggle FVGs and OBs independently
- Adjust max zones per type (5-200)
- Choose to remove or gray out mitigated zones
- Color customization for all zone types
### Detection Parameters
- **Min Impulse Body %**: Controls how strong the impulse candle must be (0.3-1.0)
- **Order Block Lookback**: How many bars to look back for OB validation (5-50)
- **ATR Length**: Period for ATR calculation (5-50)
### Trend Filter
- Enable/disable trend filtering
- Adjustable MA period for trend determination
### MTF Panel
- Show/hide the trend panel
- 4 position options: Top Right, Top Left, Bottom Right, Bottom Left
- 3 size options: Small, Normal, Large
- Customizable MA period for trend calculation across all timeframes
## Trading Applications
### 1. **Liquidity Grab Entries**
Wait for price to sweep a zone (50%+ mitigation) then enter on reversal. Smart money often "hunts" these zones before the real move begins.
### 2. **Confluence Trading**
Look for zones that align with:
- Multiple timeframe trends showing same direction
- Multiple FVGs/OBs stacking in same area
- Key support/resistance levels
### 3. **Breakout Confirmation**
Use Order Blocks to confirm the strength of breakouts. Strong OBs indicate institutional participation.
### 4. **Retracement Entries**
Enter when price returns to a fresh, unmitigated zone in the direction of the higher timeframe trend.
### 5. **Range Trading**
Identify FVG zones at range extremes - price often reverses at these inefficiencies.
## How It Works
**Fair Value Gaps** form when the middle candle creates such aggressive movement that it leaves a price gap between the high/low of surrounding candles. Institutional traders know these gaps get filled.
**Order Blocks** mark the origin of major moves. The last opposite-colored candle before a breakout is where large orders were placed. Price often returns to these zones for "retests" before continuing.
**Mitigation** happens when price returns to fill these zones. The indicator tracks this automatically, showing you which zones are still "fresh" and which have been used up.
## Best Practices
✅ **Use higher timeframe trends** - Always check the MTF panel before taking trades
✅ **Trade fresh zones** - Unmitigated zones (not gray) have the highest probability
✅ **Combine with price action** - Look for rejection wicks and engulfing candles at zones
✅ **Respect zone strength** - VERY STRONG and STRONG zones are most reliable
✅ **Use trend filter** - Especially on lower timeframes to reduce false signals
❌ **Don't overtrade** - Not every zone will react, wait for confirmation
❌ **Don't ignore context** - Check the MTF panel for conflicting trends
❌ **Don't chase** - Wait for price to come to the zone, don't enter mid-zone
## Technical Details
- **Non-repainting**: All zones are drawn on confirmed candles only
- **Performance optimized**: Uses efficient array management with per-type caps
- **Real-time updates**: Zones extend and track mitigation as price moves
- **Universal compatibility**: Works on all markets and timeframes
## Recommended Settings by Style
**Scalping (1m-5m charts):**
- Max zones: 10-15
- Use trend filter: ON
- MTF Panel: Focus on 1m-15m trends
- Remove mitigated: ON (keep chart clean)
**Day Trading (5m-1H charts):**
- Max zones: 15-20
- Use trend filter: ON
- MTF Panel: Focus on 15m-4H trends
- Remove mitigated: OFF (track zone history)
**Swing Trading (1H-D charts):**
- Max zones: 20+
- Use trend filter: Optional
- MTF Panel: Focus on 1H-1D trends
- Remove mitigated: OFF (important zones persist)
---
## Perfect For
- Smart Money Concept (SMC) traders
- ICT methodology followers
- Institutional order flow traders
- Price action traders seeking key zones
- Multi-timeframe analysis enthusiasts
**Compatible with all markets:** Forex, Crypto, Stocks, Indices, Commodities, Futures
*Trade where the institutions trade. Follow the smart money.*
Jimbob rangethis is a range indication for round numbers should give you levels to trade off when price is in new all time highs where there is no price action to level off.
HTF Candles on Lower Timeframes (Manual OHLC)Hi everyone, this indicator is designed to plot higher timeframes candles on the chart. Here are the details:
The data is built directly from OHLC values at specific time intervals, instead of using request.security.
It supports 1H / 2H / 4H / 8H / 1D higher timeframes, and can be viewed on lower timeframes such as 5m / 10m / 15m / 30m.
The main idea behind this chart is to serve as a foundation for building other indicators that need to operate on higher timeframes while still being visualized on lower timeframes.
Feel free to share your feedback or ideas for improvement in the comments below.
Top 10 Bullish Wedge ScannerThe script does a check of all stocks and gives the top 10 list of stocks with bullish wedge formed on daily timeframe.
E9 MTF Candle Array E9 MTF Candle Array plots up to six selectable higher-timeframe candle sets (e.g., H1/H4/D1/W1) as “mini candles” stacked to the right of your chart for fast multi-TF context. For each HTF, it also draws a shaded High–Low range box on the main chart that spans the candle’s time window and updates in real time as the current HTF candle forms, then “locks” the prior box when a new HTF candle opens. Optional features include HTF labels and countdown timers, Open/Close/High/Low trace lines with price labels, day/interval markers, and imbalance highlighting (FVG/VI) on the displayed HTF candle array.
*Work in progress.
ADR SQUEEZEADR SQUEEZE – Volatility Compression & Expansion
ADR SQUEEZE is a volatility-based indicator that uses Average Daily Range (ADR) to identify price compression (squeeze) and range expansion phases.
It compares the daily % price change with ADR-derived thresholds to classify market conditions.
Marker Meanings (Plotted on Zero Line)
Pink Dot – Tight Squeeze
Price movement is significantly smaller than normal ADR.
Indicates strong volatility contraction and energy buildup.
Yellow Dot – Mild Squeeze
Price movement is increasing but still below full ADR.
Often appears just before expansion.
Green Cross – Expansion Up
Price change exceeds ADR to the upside.
Signals strong bullish range expansion.
Red Cross – Expansion Down
Price change exceeds ADR to the downside.
Signals strong bearish range expansion.
How to Use
Watch for extended pink dots as early compression zones
Yellow dots often mark transition from squeeze to move
Green / Red crosses confirm directional expansion
Best used with price structure, breakouts, and trend context
SMC Ultra-Fast: ALL-IN & Auto-Signal [Fixed]Designed to help traders who know absolutely nothing about the market.
And for those whose signals don't disappear, once it goes up, it stays up. 90 percent chance of beating the market.
4H & Daily Previous Candle + Fibonacci + OTE# Multi-Timeframe OTE & Fibonacci Indicator (4H & Daily)
This Pine Script v5 indicator is designed for traders who utilize **Optimal Trade Entry (OTE)** zones and **Fibonacci retracements** based on higher timeframe market structures. It automatically identifies and plots key levels from the previous 4-hour and Daily candles to help find high-probability reversal zones.
## Key Features
### 1. Dual Timeframe OTE Zones
- **4H OTE Zone**: Automatically calculates and shades the Optimal Trade Entry area (default 61.8% - 78.6%) based on the previous 4-hour candle's range.
- **Daily OTE Zone**: Plots a secondary OTE zone based on the previous Daily candle, allowing for multi-timeframe confluence analysis.
- **Dynamic Adaptation**: The zones automatically flip based on whether the previous candle was bullish or bearish, ensuring you are always looking at the correct retracement levels.
### 2. Automated Market Structure
- **High/Low Tracking**: Plots clear horizontal lines for the previous 4H and Daily Highs and Lows.
- **Visual Distinction**: Daily levels are highlighted with thicker lines to distinguish them from 4H levels.
- **Price Labels**: Displays real-time price labels for all structural levels for quick reference.
### 3. Customizable Fibonacci Retracements
- **4H Fibonacci Levels**: Plots standard retracement levels (23.6%, 38.2%, 50%, 61.8%, 78.6%) for the 4H timeframe.
- **Fully Adjustable**: Users can input custom Fibonacci levels via the settings menu.
### 4. Real-Time Information Dashboard
- **Range Summary**: A clean table in the top-right corner displays the total pip/point range for both the previous 4H and Daily candles.
- **Clean UI**: All visual elements (colors, line widths, labels) can be toggled or customized to fit any chart theme.
## How to Use
This indicator is ideal for "Smart Money" or "ICT" style trading. Look for **confluence** where the 4H OTE zone overlaps with the Daily OTE zone or other key structural levels to identify high-precision entry points.
LockPoint TrackerLockPoint Tracker is a simple yet powerful tool for visually tracking price movement from a locked reference point.
Key Features:
• Lock any bar’s closing price with a single click.
• Reference line drawn at the locked price for clear visual context.
• “L” label marks the locked bar.
• Live percentage change label shows how far the current price has moved from the locked level.
• Green above the bar for gains, red below for losses.
• Automatically disappears on the next bar — always shows only the live value.
• Configurable label padding for optimal visibility on any chart or timeframe.
LockPoint Tracker is perfect for traders who want to monitor key levels, measure intrabar moves, or visually track performance from specific price points without cluttering the chart.
EMA + Previous Candle High/LowA versatile multi-timeframe indicator that combines customizable EMAs with previous candle levels for precise support/resistance identification.
Key Features:
📊 4 Fully Customizable EMAs:
EMA 9 (Yellow) - Fast-moving for scalping
EMA 20 (Blue) - Short-term trend
EMA 50 (Orange) - Medium-term trend
EMA 200 (White) - Long-term trend direction
Each EMA is independently customizable:
Adjustable period length
Custom color selection
Line thickness (1-5)
Transparency control (0-100%)
📈 Previous Candle Levels:
Displays high/low from any timeframe (default: Daily)
Green line for Previous High
Red line for Previous Low
Customizable line style: Solid, Dashed, or Dotted
Optional shaded zone between high/low with adjustable transparency
Price labels showing exact levels
Configurable line extension (10-200 bars forward)
Use Cases:
Day traders: Use Daily high/low with fast EMAs (9/20) for intraday support/resistance
Swing traders: Use Weekly high/low with slower EMAs (50/200) for trend confirmation
Scalpers: Combine 5-min previous levels with EMA 9 for quick entries
Position traders: Weekly/Monthly levels with EMA 200 for long-term bias
Why This Indicator:
Previous timeframe highs/lows act as natural support/resistance where price often reacts. Combined with EMAs for trend confirmation, you get clear levels to enter trades with confluence. The full customization allows you to match any trading style or chart theme.
Smart Money Zones - Multi-Timeframe AnalysisA clean and efficient smart money concepts indicator designed for traders who follow institutional order flow and price imbalances.
Core Features:
Fair Value Gaps (FVG): Automatically detects bullish and bearish imbalances where price moved too fast, leaving gaps that often get filled
Order Blocks (OB): Identifies the last bearish candle before a bullish move (and vice versa) - institutional accumulation/distribution zones
Zone Strength Rating: Each zone is classified as Very Strong, Strong, Medium, or Weak based on size relative to ATR
Multi-Timeframe Trend Panel: Real-time dashboard showing bullish/bearish trend across 7 timeframes (1m, 5m, 15m, 30m, 1H, 4H, 1D)
Smart Features:
Zones automatically extend into the future
Mitigation tracking - zones fade when 50% filled or fully violated
Optional trend filter - only shows zones aligned with the trend
Customizable zone limits to keep your chart clean
Adjustable panel position (4 corners) and size
Color-Coded Zones:
🟢 Bullish FVG (Green) - Support zones
🔴 Bearish FVG (Red) - Resistance zones
🔵 Bullish OB (Blue) - Demand zones
🟠 Bearish OB (Orange) - Supply zones
Perfect for scalpers, day traders, and swing traders who trade reversals at key institutional levels. Combines smart money concepts with multi-timeframe confirmation for higher probability setups.
Breakdown Hold (1m) - Manual Level//@version=6
// =============================================================================
// EN — Script Overview
// Name: Breakdown Hold (1m) - Manual Level
// Purpose:
// Detect a simple pattern: price breaks below a manually set level, then
// stabilizes ("holds") within ~1 minute (default) without further dumping.
// When confirmed, it prints "HOLD OK" and triggers an alert.
//
// How it works:
// 1) You input a fixed price Level.
// 2) On the FIRST break below Level (LOW sweep by default), the script "arms".
// 3) For the next N bars on the 1-minute stream (default N=1):
// - If price drops too deep (beyond Max Further Drop), it fails.
// 4) When the window ends:
// - If it did NOT drop too deep AND it bounced from the window low by at
// least Min Bounce (and optional reclaim above Level), it confirms HOLD.
//
// Recommended usage:
// - Works best on a 1-minute chart.
// - If you are on another timeframe, keep "Force 1m Evaluation" enabled
// so the logic still evaluates on 1-minute data.
//
// Alert:
// - Condition title: breakdown_hold_confirm
//
// =============================================================================
// 中文 — 脚本说明
// 名称：Breakdown Hold (1m) - Manual Level
// 用途：
// 识别一个非常简单的“跌破手动固定价位后，约 1 分钟内踩住不再继续下跌”的形态。
// 确认后在图上打出 “HOLD OK”，并触发提醒。
//
// 原理：
// 1) 手动输入固定价位 Level。
// 2) 当价格第一次跌破 Level（默认按 LOW 刺破）后进入监测（armed）。
// 3) 在接下来 N 根 1分钟K（默认 N=1）内：
// - 若继续下探太深（超过允许最大继续下跌幅度），判定失败，不触发。
// 4) 窗口结束时：
// - 若未下探过深，且从窗口最低点出现至少 Min Bounce 的反弹
// （可选要求收盘站回 Level 上方），则判定“踩住确认”。
//
// 推荐用法：
// - 最推荐 1分钟图使用。
// - 如果你在其他周期图上用，请保持 “Force 1m Evaluation” 开启，
// 让判断仍然基于 1分钟数据进行。
//
// 提醒条件：
// - breakdown_hold_confirm
// =============================================================================
Smart Money Zones (FVG + OB) + MTF Trend Panel## Overview
Professional-grade institutional trading zones indicator that identifies **Fair Value Gaps (FVG)** and **Order Blocks (OB)** - key price inefficiencies where smart money operates. Includes a comprehensive **Multi-Timeframe Trend Panel** for complete market context at a glance.
## Core Features
### 🎯 Fair Value Gaps (FVG)
Fair Value Gaps occur when price moves so aggressively that it leaves an "imbalance" or "gap" in the market structure. These zones often act as magnets where price returns to find liquidity.
**Detection Logic:**
- **Bullish FVG**: When current candle's low is above the high of the candle 2 bars ago
- **Bearish FVG**: When current candle's high is below the low of the candle 2 bars ago
- Requires strong impulse candle (configurable body percentage threshold)
- Color-coded zones: Green for bullish, Red for bearish
### 📦 Order Blocks (OB)
Order Blocks represent the last opposite candle before a significant price move - the zone where institutional orders were placed before the breakout.
**Detection Logic:**
- Identifies the last bearish candle before a strong bullish breakout (Bullish OB)
- Identifies the last bullish candle before a strong bearish breakout (Bearish OB)
- Validates breakout strength using ATR multiplier (1.2x default)
- Color-coded zones: Blue for bullish, Orange for bearish
### 📊 Multi-Timeframe Trend Panel
Real-time trend analysis across **7 timeframes** displayed in an elegant dashboard:
- **1 Minute** - Ultra short-term scalping
- **5 Minutes** - Short-term momentum
- **15 Minutes** - Intraday swings
- **30 Minutes** - Session trends
- **1 Hour** - Multi-session trends
- **4 Hours** - Daily structure
- **Daily** - Long-term direction
**Visual Indicators:**
- 🟢 Green circle = Bullish trend
- 🔴 Red circle = Bearish trend
- Clean, professional table design with customizable position and size
## Intelligence Features
### 🧠 Zone Strength Rating
Every zone is automatically classified by strength based on size relative to ATR:
- **VERY STRONG** - 2.0x ATR or more (major institutional zones)
- **STRONG** - 1.5x to 2.0x ATR (significant zones)
- **MEDIUM** - 1.0x to 1.5x ATR (moderate zones)
- **WEAK** - Below 1.0x ATR (minor zones)
Strength rating helps you prioritize which zones to trade from!
### 📉 Smart Mitigation Tracking
Zones automatically track how much they've been "filled" or mitigated:
- Calculates penetration percentage as price enters the zone
- Zones turn **gray** when 50%+ mitigated or fully filled
- Option to **auto-delete** mitigated zones to keep chart clean
- Live zones extend dynamically with price action
### 🎨 Trend Filter (Optional)
When enabled, only shows zones aligned with the current trend:
- Uses customizable MA period (default 50)
- Bullish zones only appear in uptrend
- Bearish zones only appear in downtrend
- Reduces noise and false signals significantly
## Customization Options
### Display Settings
- Toggle FVGs and OBs independently
- Adjust max zones per type (5-200)
- Choose to remove or gray out mitigated zones
- Color customization for all zone types
### Detection Parameters
- **Min Impulse Body %**: Controls how strong the impulse candle must be (0.3-1.0)
- **Order Block Lookback**: How many bars to look back for OB validation (5-50)
- **ATR Length**: Period for ATR calculation (5-50)
### Trend Filter
- Enable/disable trend filtering
- Adjustable MA period for trend determination
### MTF Panel
- Show/hide the trend panel
- 4 position options: Top Right, Top Left, Bottom Right, Bottom Left
- 3 size options: Small, Normal, Large
- Customizable MA period for trend calculation across all timeframes
## Trading Applications
### 1. **Liquidity Grab Entries**
Wait for price to sweep a zone (50%+ mitigation) then enter on reversal. Smart money often "hunts" these zones before the real move begins.
### 2. **Confluence Trading**
Look for zones that align with:
- Multiple timeframe trends showing same direction
- Multiple FVGs/OBs stacking in same area
- Key support/resistance levels
### 3. **Breakout Confirmation**
Use Order Blocks to confirm the strength of breakouts. Strong OBs indicate institutional participation.
### 4. **Retracement Entries**
Enter when price returns to a fresh, unmitigated zone in the direction of the higher timeframe trend.
### 5. **Range Trading**
Identify FVG zones at range extremes - price often reverses at these inefficiencies.
## How It Works
**Fair Value Gaps** form when the middle candle creates such aggressive movement that it leaves a price gap between the high/low of surrounding candles. Institutional traders know these gaps get filled.
**Order Blocks** mark the origin of major moves. The last opposite-colored candle before a breakout is where large orders were placed. Price often returns to these zones for "retests" before continuing.
**Mitigation** happens when price returns to fill these zones. The indicator tracks this automatically, showing you which zones are still "fresh" and which have been used up.
## Best Practices
✅ **Use higher timeframe trends** - Always check the MTF panel before taking trades
✅ **Trade fresh zones** - Unmitigated zones (not gray) have the highest probability
✅ **Combine with price action** - Look for rejection wicks and engulfing candles at zones
✅ **Respect zone strength** - VERY STRONG and STRONG zones are most reliable
✅ **Use trend filter** - Especially on lower timeframes to reduce false signals
❌ **Don't overtrade** - Not every zone will react, wait for confirmation
❌ **Don't ignore context** - Check the MTF panel for conflicting trends
❌ **Don't chase** - Wait for price to come to the zone, don't enter mid-zone
## Technical Details
- **Non-repainting**: All zones are drawn on confirmed candles only
- **Performance optimized**: Uses efficient array management with per-type caps
- **Real-time updates**: Zones extend and track mitigation as price moves
- **Universal compatibility**: Works on all markets and timeframes
## Recommended Settings by Style
**Scalping (1m-5m charts):**
- Max zones: 10-15
- Use trend filter: ON
- MTF Panel: Focus on 1m-15m trends
- Remove mitigated: ON (keep chart clean)
**Day Trading (5m-1H charts):**
- Max zones: 15-20
- Use trend filter: ON
- MTF Panel: Focus on 15m-4H trends
- Remove mitigated: OFF (track zone history)
**Swing Trading (1H-D charts):**
- Max zones: 20+
- Use trend filter: Optional
- MTF Panel: Focus on 1H-1D trends
- Remove mitigated: OFF (important zones persist)
---
## Perfect For
- Smart Money Concept (SMC) traders
- ICT methodology followers
- Institutional order flow traders
- Price action traders seeking key zones
- Multi-timeframe analysis enthusiasts
**Compatible with all markets:** Forex, Crypto, Stocks, Indices, Commodities, Futures
*Trade where the institutions trade. Follow the smart money.*
VWAP Breakout NY Open Only vwap breakout targeting multiday taking only 2 trades per day in the first 2 hours of ny session
Options Chain Table [Enhanced]The primary purpose of this script is Unusual Options Activity (UOA) Detection.Identifying "Whales": Traders use it to spot when large institutions or "smart money" are aggressively buying Calls (betting price goes up) or Puts (betting price goes down).Contextualizing Volume: Instead of just showing raw volume (e.g., "10,000 contracts traded"), it calculates a Ratio. If the average volume is 1,000 and today's volume is 10,000, that is a 10x Spike, which is highly significant.0DTE & Short-Term Trading: It is optimized for analyzing the "Active Expiration" (often the current day for SPX/NDX), making it useful for 0DTE (Zero Days to Expiration) strategies.2. Key Features & VisualsThe script overlays a table on your chart with the following columns:ColumnDescriptionCall AvgThe historical average volume (Moving Average) for the Call option.Call RatioThe "Spike Factor." calculated as $ NSE:CURRENT Volume / Average Volume$$. High ratios turn Green.Call VolThe actual volume traded today for that Call strike.StrikeThe Strike Price of the option (e.g., 5800). The "At-The-Money" (ATM) strike is highlighted Blue.Put VolThe actual volume traded today for that Put strike.Put RatioThe "Spike Factor" for Puts. High ratios turn Red/Fuchsia.Put AvgThe historical average volume (Moving Average) for the Put option.3. How It Works (Technical Breakdown)This script uses advanced Pine Script techniques to bypass some of TradingView's limitations regarding options data.A. Dynamic Symbol ConstructionTradingView does not have a simple function to "get the option chain." This script manually constructs the ticker symbol for each option contract using the OPRA format:Format: OPRA:ROOT Example: OPRA:SPXW251226C5800 (SPX Weekly, Dec 26, 2025, Call, 5800 Strike).B. Tuple Fetching (Optimization)TradingView limits scripts to 40 request.security calls. To display 11 rows of data (which would normally require 44 calls: Call Vol, Call MA, Put Vol, Put MA per row), the script uses Tuple Fetching. It requests the Volume and the Moving Average in a single request, cutting the data usage in half and allowing the table to load faster without errors.C. Spike LogicIt calculates a moving average (EMA or SMA) of the volume over a set lookback period (default 20 bars).Medium Spike (M): Volume is > 2x the average.Large Spike (L): Volume is > 3.5x the average.Extreme Spike (E): Volume is > 5x the average.4. How to Use It (User Guide)To use this script effectively, you must configure the "Inputs" correctly, as it cannot always guess the correct expiration dates automatically.Add to Chart: Add the script to a chart (works best on indices like SPX, NDX, SPY, QQQ).Set the Center Price (Crucial):In the settings, look for "Manual Center Price".Input the current price of the asset (e.g., if SPX is at 5815, enter 5815).Why? The script generates strikes around this number. If you leave it 0, it might try to use the close price, which can be buggy during pre-market or if data is delayed.Set the Expiration (DTE):The script attempts to default to "Today," but for best results, manually enter the date in YYMMDD format in the "Manual DTE" field.Example: For December 26, 2025, enter 251226.Read the Alerts:The script allows you to set alerts in TradingView."Any Spike → CALL": Tells you a Call option just had a massive volume spike."Any Spike → PUT": Tells you a Put option just had a massive volume spike.5. Strategy ExampleA trader using this script might see the following scenario:Market: SPX is trading sideways at 5800.Signal: The table flashes a bright green cell on the 5850 Call with a ratio of "E 6.2x" (Extreme, 6.2 times normal volume).Interpretation: Someone is aggressively buying out-of-the-money Calls. The trader might interpret this as a bullish signal (Gamma exposure increasing at 5850) and enter a long position, expecting the price to be magnetized toward 5850.
Triple EMA + Key Levels [Scalping-Algo]TITLE: Triple EMA Day Trading System with Multi-Timeframe Support/Resistance Levels
DESCRIPTION:
📊 Overview
This indicator combines trend-following EMAs with key historical price levels to create a complete day trading toolkit. It helps traders identify trend direction while highlighting important support and resistance zones from multiple timeframes.
🎯 Purpose & Trading Application
Day traders often need to quickly assess:
1. Current trend direction (using EMAs)
2. Key price levels where reversals or breakouts may occur
This indicator solves both needs in one tool, reducing chart clutter from multiple indicators.
📈 How It Works
TREND IDENTIFICATION (EMAs):
- EMA 13 (Yellow): Fast EMA for short-term momentum and entry timing
- EMA 48 (Purple): Medium EMA for intraday trend direction
- EMA 200 (Red): Slow EMA for overall trend bias
Trading Logic:
- When price is above all 3 EMAs = Strong bullish bias
- When price is below all 3 EMAs = Strong bearish bias
- EMA crossovers signal potential trend changes
- The 13/48 crossover is particularly useful for intraday entries
SUPPORT & RESISTANCE LEVELS:
- Previous Day High/Low (Green, Solid): Most recent daily range - high probability reaction zones
- 2-Day High/Low (Blue, Dashed): Extended lookback for stronger levels
- Previous Week High/Low (Orange, Dotted): Major institutional levels
Why These Levels Matter:
Previous day and weekly highs/lows are watched by many traders and algorithms. Price often:
- Reverses at these levels (support/resistance)
- Accelerates through them (breakout trades)
🔧 How To Use
FOR TREND TRADING:
1. Identify bias using EMA stack (all 3 aligned = strong trend)
2. Look for pullbacks to EMA 13 or 48 for entries
3. Use key levels as profit targets
FOR REVERSAL TRADING:
1. Watch for price approaching previous day/week levels
2. Look for rejection candles at these levels
3. Use EMA 13 break as confirmation
FOR BREAKOUT TRADING:
1. Identify consolidation near key levels
2. Enter on break of level with volume
3. Use opposite level as target
⚙️ Settings
All parameters are fixed for simplicity:
- EMAs: 13, 48, 200 periods
- Levels: Previous Day, 2-Day, Previous Week
- All lines thickness: 2
📝 Notes
- Best used on intraday timeframes (1min to 1hour)
- Levels update automatically each day/week
- Labels on right side identify each level (PDH, PDL, 2DH, 2DL, PWH, PWL)
---
TAGS: ema, daytrading, support, resistance, levels, intraday, trend, scalping, swingtrading
Levels(5/15 ORB;Previous day Low/High and Previous week low/highIt marks 5/15 Opening range candles high and low. Also Previous week and previous day. Very helpful to filter out RS/RW stocks and in general to see chop chop range vs clean trend day.
Important High/Low (Manual DateTime Picker + Strong BOS) v2.5📐 Important High / Low（结构趋势指标）使用指南
定位一句话
这是一个 “结构派趋势确认 + 关键防守位识别” 的指标
👉 不预测行情
👉 不频繁给信号
👉 只在你定义的趋势里，标出 必须尊重的高点 / 低点
一、这个指标解决什么问题？
在一段趋势中，你真正关心的只有三件事：
趋势是否还成立
哪里是“不能被破”的关键结构位
止损应该放在哪里才是“逻辑止损”而不是情绪止损
本指标通过 结构拐点（Pivot）+ 结构突破（BOS）确认 来回答这三件事。
二、核心设计理念（非常重要）
1️⃣ 重要低点 > 次要低点
不是每个低点都重要
只有“低点 → 后续出现强势突破并创新高”
才会被确认成 重要低点
2️⃣ 上涨趋势里，只允许重要低点
不会在上涨趋势里画“重要高点”
下跌趋势同理
3️⃣ 所有重要点，都是事后确认
这是优点，不是缺点
它保证：
被画出来的点，一定“已经被市场认可”
三、输入参数详解（逐个解释）
🟦 A. 趋势控制（最重要）
Trend mode
选项 含义
Auto(EMA144) 自动趋势（推荐）
Manual(Time Window) 手动定义趋势区间
Auto(EMA144)（默认、最常用）
价格在 EMA144 上方 → 视为上涨趋势
价格在 EMA144 下方 → 视为下跌趋势
📌 行为约束：
上涨趋势：只画重要低点
下跌趋势：只画重要高点
适合 90% 日内 / 波段交易
Manual(Time Window)
当你已经主观判断趋势方向时使用。
配套参数：
Manual trend direction
Up：只允许重要低点
Down：只允许重要高点
Use manual time window?
打开后，才会启用时间段控制
Manual trend START / END (date & time)
用 TradingView 日期时间选择器 直接选
不需要手填时间戳
📌 常见用途：
回测一整段趋势
训练“趋势内只做一个方向”
事件行情 / 主升浪
🟦 B. 结构拐点识别
Pivot strength (L/R)
决定一个高点 / 低点
需要左右各多少根K线确认
周期 推荐值
1–5 分钟 2–3
15–30 分钟 3–5
1 小时 5–7
4 小时+ 7–10
📌 数值越大：
结构越“干净”
但确认越慢
🟦 C. 结构突破（BOS）规则
BOS uses Wick (High/Low)
true（推荐）：
影线突破就算结构突破
false：
必须收盘价突破（更保守）
Must keep making NEW high/low
是否要求“持续创新高 / 新低”
选项 效果
true（强烈推荐） 过滤横盘、假突破
false 信号更多，但更杂
📌 打开后：
每一次 BOS
必须比上一次突破更高 / 更低
才会确认新的重要点
这是“稳”的关键来源之一。
🟦 D. 强势K线过滤（可选）
Use strong candle filter on BOS bar?
决定 BOS 那根K线是否必须是强势K线
Body / Range >=
K线实体占整根K线的比例
推荐：
0.5：宽松
0.6：平衡（推荐）
0.7：非常严格
Range >= ATR *
BOS K线的波动幅度
推荐：
日内：0.8 ~ 1.0
波段：1.0 ~ 1.2
📌 强势过滤适合：
山寨币
假突破多的品种
你想 少而准
🟦 E. 画线与止损体验
Line offset (ATR multiplier)
决定重要高/低点横线
离影线多远
市场 推荐
BTC / ETH 0.1 ~ 0.15
山寨 / 高波动 0.2 ~ 0.3
Short line length (bars)
横线长度
只影响视觉，不影响逻辑
推荐：5 ~ 8
四、不同周期的推荐模板
🔹 日内模板（15m / 30m）
Trend mode: Auto(EMA144)
Pivot strength: 3
Use wick BOS: true
Must make new high/low: true
Strong candle filter: true
Body/Range: 0.6
ATR multiple: 1.0
Line offset: 0.15
特点：
结构清晰
假突破明显减少
适合顺趋势波段
🔹 波段模板（1h / 4h）
Trend mode: Auto(EMA144)
Pivot strength: 5–7
Use wick BOS: true
Must make new high/low: true
Strong candle filter: false 或 true
Line offset: 0.2
特点：
重要点很少
但每一个都极具意义
非常适合“结构止损”
五、如何用它做交易（一句话版）
只在趋势方向上进场，
止损永远放在最近的“重要结构点”之外，
一旦被破，承认你的趋势假设是错的。
六、什么时候你“应该退出”，而不是“继续找理由”
多单：重要低点被有效跌破
空单：重要高点被有效突破
📌 这不是指标失效
📌 而是 你的趋势已经结束
📐 Important High / Low
User Guide (English Version)
One-line description
A market structure–based trend confirmation and key defense level indicator
Not predictive
No frequent signals
Only marks critical highs/lows inside a defined trend
1. What problem does this indicator solve?
In a trend, traders only care about:
Is the trend still valid?
Which level must NOT be broken?
Where should a logical stop-loss be placed?
This indicator answers these questions using
Pivot structure + Break of Structure (BOS).
2. Core Concepts
1️⃣ Important Low > Minor Low
Not every low is important
A low becomes important only if price later breaks structure and makes a new high
2️⃣ In an uptrend, only Important Lows exist
No important highs in uptrends
Vice versa for downtrends
3️⃣ All important points are confirmed after the fact
This is a feature, not a flaw
Ensures all marked levels are validated by price action
3. Input Parameters Explained
🟦 A. Trend Control (Most Important)
Trend mode
Option Meaning
Auto(EMA144) Automatic trend (recommended)
Manual(Time Window) Manually defined trend
Auto(EMA144)
Price above EMA144 → Uptrend
Price below EMA144 → Downtrend
Rules:
Uptrend → only Important Lows
Downtrend → only Important Highs
Manual(Time Window)
Used when you already know the trend direction.
Related inputs:
Manual trend direction
Up → only Important Lows
Down → only Important Highs
Use manual time window?
Enables the time window
Manual trend START / END (date & time)
Select via TradingView date-time picker
No timestamp typing required
🟦 B. Pivot Structure
Pivot strength (L/R)
Defines how many bars on each side confirm a swing point.
Timeframe Suggested
1–5m 2–3
15–30m 3–5
1h 5–7
4h+ 7–10
🟦 C. Break of Structure (BOS)
BOS uses Wick (High/Low)
true → wick break counts (recommended)
false → close break only
Must keep making NEW high/low
Requires continuous higher highs / lower lows.
true (strongly recommended)
Filters chop and fake breaks
Fewer but higher-quality structure points
false
More signals, more noise
🟦 D. Strong Candle Filter (Optional)
Use strong candle filter on BOS bar?
Defines whether the BOS candle must be strong.
Body / Range >=
Body dominance, recommended 0.6
Range >= ATR *
Expansion requirement
Intraday: 0.8–1.0
Swing: 1.0–1.2
🟦 E. Drawing & Stop-Loss Behavior
Line offset (ATR multiplier)
Distance between structure line and candle wick.
Market Suggested
BTC / ETH 0.1–0.15
Altcoins 0.2–0.3
4. Recommended Presets
🔹 Intraday (15m / 30m)
Trend mode: Auto(EMA144)
Pivot strength: 3
Use wick BOS: true
Must make new high/low: true
Strong candle filter: true
Body/Range: 0.6
ATR multiple: 1.0
Line offset: 0.15
🔹 Swing (1h / 4h)
Trend mode: Auto(EMA144)
Pivot strength: 5–7
Use wick BOS: true
Must make new high/low: true
Strong candle filter: optional
Line offset: 0.2
5. Trading Principle (One Sentence)
Trade with the trend,
place stops beyond the most recent important structure level,
and exit immediately when that structure is broken.
FPT - Harami FPT – Harami (Wick Included) is a clean and minimalist candlestick pattern indicator that highlights Harami reversal formations using full candle ranges (wicks included).
This version follows a strict and objective definition of Harami by requiring the entire range of the second candle (high–low) to be fully contained within the range of the first candle.
🔹 Patterns Detected
Bullish Harami
First candle: Bearish
Second candle: Bullish
Second candle’s high and low are completely inside the first candle’s range
Bearish Harami
First candle: Bullish
Second candle: Bearish
Second candle’s high and low are completely inside the first candle’s range
Only the pattern-forming candle (second candle) is highlighted to keep the chart clean and focused.
🎨 Customization
Highlight Bullish, Bearish, or Both Harami patterns
Separate and fully customizable colors for bullish and bearish patterns via Inputs → Colors
Style tab colors are intentionally not used
🎯 Design Philosophy
No indicators
No filters
No assumptions about trend or volatility
This tool is designed for traders who prefer pure price action and want to identify Harami patterns in combination with:
Key levels
Support & resistance
Market structure
Session-based or discretionary analysis
⚠️ This indicator is for visual analysis only and does not provide trade signals.
Always apply proper risk management.
RRR EMA Ignition BUY & SELL (Sideways-Proof)🔹 Description
RRR EMA Ignition Buy & Sell is a trend-following, non-repainting indicator designed to capture high-probability trend ignition points while filtering out sideways market noise.
Unlike basic EMA crossover systems that generate frequent false signals, this indicator uses a state-based trend engine, volatility filters, and trend strength confirmation to ensure signals appear only when a real directional move is underway.
It is optimized for swing trading and positional trading on stocks and indices.
🔹 Core Logic
🔼 BUY Signal (Bullish Ignition)
A BUY signal is generated only when all of the following conditions are met:
EMA 21 confirms bullish regime above EMA 55
EMA 9 shows momentum above EMA 21
Price is trading above EMA 55
Candle closes bullish (confirmation)
Trend strength is validated using ADX
EMA 55 is sloping upward
Price is sufficiently far from EMA 55 (ATR-based distance filter)
Only one BUY per bullish trend leg (no repeated signals)
🔽 SELL Signal (Bearish Ignition)
A SELL signal is the exact reverse of the BUY logic:
EMA 21 confirms bearish regime below EMA 55
EMA 9 shows bearish momentum below EMA 21
Price is trading below EMA 55
Candle closes bearish
ADX confirms trend strength
EMA 55 is sloping downward
ATR distance filter blocks sideways chop
Only one SELL per bearish trend leg
🔹 Key Features
✅ Non-repainting (signals appear only after candle close)
✅ Sideways-market protection using ATR + ADX
✅ State-based logic (prevents repeated BUY/SELL spam)
✅ Handles strong V-reversals using trend re-arm logic
✅ Clean signals suitable for alerts and automation
✅ Works across stocks, indices, and ETFs
🔹 Best Use Cases
📈 Swing trading on Daily / 4H charts
📊 Large-cap stocks and indices (Nifty, Bank Nifty, SPX, NASDAQ)
🚫 Not intended for low-timeframe scalping
🎯 Designed for trend capture, not range trading
🔹 Recommended Settings
Indian Stocks
ADX Minimum: 18
ATR Multiplier: 0.6 – 0.8
US Indices
ADX Minimum: 22
ATR Multiplier: 0.5
(Default settings work well for most instruments.)
🔹 How to Trade (Simple Guide)
Use BUY signals to enter or add to long positions
Use SELL signals to enter short positions or exit longs
Combine with:
Support/resistance
Higher-timeframe bias
Position sizing & risk management
🔹 Disclaimer
This indicator is a decision-support tool, not financial advice.
Always apply proper risk management and confirm signals with your own analysis.
Advanced algo [For Indian market]🙏 Gratitude to the TradingView Community
Before anything else, I would like to sincerely thank the TradingView community. I have learned immensely from the shared ideas, scripts, and discussions here over time. This indicator is my small way of giving back to the community that has helped me grow as a trader and developer.
📌 Indicator Overview
Advanced Algo is a non-repainting, rule-based trading indicator designed primarily for Indian indices and stocks, while remaining equally effective on other liquid instruments.
The script focuses on clean trend identification, disciplined entries, and well-defined risk management, making it suitable for intraday as well as positional analysis depending on the timeframe used.
✅ Key Highlights
100% Non-Repainting Logic
All signals are generated only after bar confirmation using a delay mechanism, ensuring reliability and backtesting accuracy.
Clear BUY / SELL Signals
Signals are plotted only on trend reversals, avoiding noise and repeated entries.
Automatic TP & SL Levels
Entry, Take-Profit, and Stop-Loss levels are calculated at the time of trade entry and remain fixed throughout the trade.
Intrabar TP / SL Detection
Profit targets and stop-losses are detected as soon as price touches them, providing realistic trade behavior.
Visual Risk-Reward Zones
Entry, TP, and SL lines with color-filled zones make trade structure easy to read at a glance.
Built-in Statistics Table
Displays Buy TP, Sell TP, Buy SL, and Sell SL counts for quick performance tracking.
⚙️ Logic (Brief & High-Level)
A smoothed range-based trend filter is used to identify directional bias.
Consecutive directional strength confirms trend continuation.
BUY or SELL signals are generated only when the trend state flips, reducing false signals.
A delay offset is applied to ensure non-repainting behavior.
Once a trade is triggered:
Entry is fixed
TP and SL are calculated using user-defined percentages
No new trade is allowed until the current trade exits or reverses
🟢 BUY / 🔴 SELL Logic (Brief)
BUY Signal
Triggered when price confirms a bullish trend shift after a bearish phase.
SELL Signal
Triggered when price confirms a bearish trend shift after a bullish phase.
Only one trade is active at a time to maintain clarity and discipline.
🎯 Take-Profit & 🛑 Stop-Loss
TP & SL are percentage-based and configurable via inputs.
Levels are calculated at entry and do not trail or repaint.
TP and SL exits are marked clearly on the chart with labels.
Trades are force-reset before allowing a new entry.
🔔 Alerts Included
Built-in alerts are available for:
Long Entry
Short Entry
Long Exit (TP / SL)
Short Exit (TP / SL)
These alerts can be easily connected to automation or webhook-based execution systems.
⚠️ Disclaimer
This indicator is provided for educational and informational purposes only.
It is not financial advice. Trading in stocks, indices, and derivatives involves risk, and past performance does not guarantee future results.
Always:
Use proper risk management
Confirm signals with additional analysis
Test thoroughly before using in live markets
The author is not responsible for any financial losses incurred while using this script.
⭐ If you find this indicator useful, your feedback and support are always appreciated.
Happy trading and all the best!
