Dynamic Support Resistance Zones======================================================================
TRADINGVIEW PUBLICATION - DYNAMIC SUPPORT RESISTANCE ZONES
======================================================================
TITLE: Dynamic Support Resistance Zones
SHORT TITLE: SR Zones
--------------------------------------------------------------------------------
DESCRIPTION (Copy below for TradingView publication)
--------------------------------------------------------------------------------
The Dynamic Support Resistance Zones indicator identifies key price levels where potential reversals may occur by analyzing candlestick behavior and volume dynamics together.
▶ CONCEPT AND METHODOLOGY
This indicator detects support and resistance levels through a specific combination of three market conditions occurring simultaneously:
1. Candlestick Body Expansion: The current candle's body (distance between open and close) must be larger than the previous candle's body. This signals increased price commitment from market participants.
2. Direction Reversal: The current candle must close in the opposite direction of the previous candle. A bullish candle following a bearish candle suggests potential support formation, while a bearish candle following a bullish candle suggests potential resistance formation.
3. Volume Contraction: The current candle must have lower volume than the previous candle. This condition filters out high-volume breakout moves and focuses on exhaustion patterns where price reverses on decreasing participation.
When all three conditions align, the indicator marks the opening price of the previous candle as a significant level.
▶ HOW LEVELS ARE CLASSIFIED
Support Zones (Green Lines): Form when a bullish reversal candle appears with an expanded body on declining volume. These represent areas where buying pressure overcame selling pressure.
Resistance Zones (Red Lines): Form when a bearish reversal candle appears with an expanded body on declining volume. These represent areas where selling pressure overcame buying pressure.
▶ DYNAMIC LEVEL MANAGEMENT
The indicator continuously monitors each level and updates its status:
- Active Levels (Solid Lines): Levels that have not been broken by a closing price. These extend forward automatically as new bars form.
- Broken Levels (Dashed Lines): When price closes beyond a level, it converts to a dashed line. These broken levels remain visible for potential retest scenarios.
- Level Removal: Broken support levels are removed if price closes back above them. Broken resistance levels are removed if price closes back below them. This keeps the chart clean and focused on relevant levels.
▶ TRADING APPLICATIONS
Reversal Trading: Look for price approaching active support or resistance levels for potential bounce trades.
Breakout Confirmation: When a solid level converts to dashed, it confirms a breakout. The dashed level then becomes a potential retest zone.
Trend Analysis: Multiple support levels stacking below price suggests bullish structure. Multiple resistance levels above price suggests bearish structure.
Risk Management: Active levels provide logical areas for stop-loss placement just beyond the identified zones.
▶ WHY THIS COMBINATION WORKS
The three-filter approach (body expansion + direction change + volume decline) identifies exhaustion reversals rather than continuation patterns. Large body candles show conviction, direction change shows momentum shift, and lower volume suggests the prior move is losing steam rather than breaking out with strength.
▶ SETTINGS
This indicator uses fixed detection logic with no adjustable parameters to maintain consistency. The colors are preset: green for support zones and red for resistance zones.
▶ BEST PRACTICES
- Works on all timeframes but higher timeframes typically produce more reliable levels
- Combine with trend analysis for directional bias
- Not all levels will hold; use proper risk management
- More effective in ranging or mean-reverting conditions than strong trending markets
--------------------------------------------------------------------------------
TAGS (for TradingView)
--------------------------------------------------------------------------------
support, resistance, reversal, volume, candlestick, levels, zones, price-action
--------------------------------------------------------------------------------
CATEGORY
--------------------------------------------------------------------------------
Support and Resistance
======================================================================
Candlestick analysis
Arzouni signals EngineArzouni signals Engine generates BUY/SELL signals and automatically prints ENTRY, TP1/TP2/TP3 and SL levels. Alerts are sent via alert() with ready-to-use multi-line Telegram messages. To receive alerts: create an alert and choose “Any alert() function call”.
MTF Auto Fibs + All Levels [Clean]auto fib off whatever higher time frame you want! Helps you seen levels faster and with out switch time frames
SnR Fresh & Unfresh Level Detector by RWBTradeLabSnR Fresh & Unfresh Level Detector by RWBTradeLab
A clean, non-repainting Support/Resistance level tracker built for price action traders who want to see which levels are still “Fresh” vs “Unfresh” — based strictly on CLOSED candle behavior with breakout and rejection state changes + alerts.
What this indicator does
This script detects 4 SnR level types from 2-candle sequences (CLOSED candles only), then continuously updates each level’s status as Fresh ↔ Unfresh depending on market interaction.
Level Creation
All levels are created using 2 CLOSED candles only (no running candle logic):
A Level
Green → Red
Level = 1st Green candle Close
V Level
Red → Green
Level = 1st Red candle Close
Bullish Gap Level
Green → Green
Level = 1st Green candle Close
Bearish Gap Level
Red → Red
Level = 1st Red candle Close
When a level is created, it starts as: Fresh
Fresh vs Unfresh Logic (Dynamic, continuous process)
This indicator continuously updates the SAME level over time:
Fresh → Unfresh (Rejection)
A level becomes Unfresh when a candle touches the level (wick touch) but closes back on the opposite side (rejection confirmed).
Unfresh → Fresh (Breakout)
A level becomes Fresh again when a candle closes through the level (confirmed breakout).
✅ This means a level can change state multiple times:
Fresh → Unfresh → Fresh → Unfresh … (based on confirmed candle behavior)
Visuals on chart
Each detected level is drawn as a horizontal Ray extended to the right.
Labels are drawn in a clean centered-box style:
* Fresh Level label = Green background + White text
* Unfresh Level label = Red background + White text
Labels are placed at the start (creation candle) of the level, not in the middle.
Labels are automatically positioned above/below based on level type:
* A Level / Bearish Gap labels above
* V Level / Bullish Gap labels below
Alerts (bar-close only)
Built-in alerts trigger only on CONFIRMED candles:
* Fresh Created (new level created)
* Fresh → Unfresh (rejection confirmed)
* Unfresh → Fresh (breakout confirmed)
No repainting, no running-bar alerts.
Key settings
Candle Length (Closed bars only): Scans and keeps levels created within the last N closed candles (running candle excluded).
Default: 20 (Min 5 / Max 100)
Show Fresh Levels: On/Off
Show Unfresh Levels: On/Off
Show Text Labels: On/Off
Label Offset (ticks): Adjust label distance for a cleaner chart
Max Levels To Keep: Performance safety cap to prevent excessive objects
Non-repainting confirmation
All levels, state changes, and alerts are calculated on confirmed bars only.
No repainting, no running-bar signals.
Best use
Works on any market and timeframe. For higher reliability, combine with:
Higher timeframe structure
Supply & Demand zones
Trend context and liquidity sweeps
Confirmation candles around key levels
Disclaimer
This indicator is a level-detection and state-tracking tool, not financial advice. Trading involves risk; always use proper risk management and confirm levels with your own analysis.
Creator: RWBTradeLab
If you find this useful, please leave a like ⭐ and share your feedback.
Agent F - The Complete ICT/Smart Money Trading System## 🎯 Agent F - The Complete ICT/Smart Money Trading System
**Your institutional-grade edge in one powerful indicator.**
Stop juggling 5+ indicators. Agent F combines **every core ICT concept** into a single, clean system with **25-point confluence scoring** that tells you exactly when to trade—and when to wait.
---
### ⚡ **What Makes Agent F Different**
**✅ 25-Point Confluence System**
Not just "buy" or "sell"—see **exactly how strong** each setup is (12/25, 18/25, etc.) with transparent factor breakdown.
**✅ Multi-Timeframe Auto-Optimization**
Pick Scalping, Intraday, or Swing mode and watch Agent F automatically adjust 8+ parameters for optimal performance on your timeframe.
**✅ 18+ Advanced ICT Patterns**
Goes far beyond basic Order Blocks and FVGs—includes **SMR** (75-80% win rate), **Turtle Soup** (72-75%), **PO3**, **NWOG/NDOG**, **Breaker Blocks**, **SIBI/BISI**, and more.
**✅ Edge Call AI**
Immediate direction prediction for 5-point scalps. Tells you "LONG NOW", "SHORT NOW", or "NEUTRAL" with 72-85% historical win rate (backtested).
**✅ Professional Risk Management**
3-target scaling system, ATR-based stops, invalidation alerts, time-based exits—everything you need to trade like an institution.
**✅ Zero Repaint**
All signals are final. What you see is what you get. No repainting games.
---
### 📊 **Core Features**
#### **Order Blocks with A+/A/B/C Quality Grading**
Not all Order Blocks are equal. Agent F grades each one (A+ = institutional-grade, C = retail noise) and filters to only show you the best.
- Detects both standard OBs and **Breaker Blocks** (flipped OBs with 75% reversal rate)
- **Propulsion Blocks** (>2 ATR displacement = strong conviction)
- **Rejection Blocks** (tested multiple times = proven levels)
- Shows formation age, volume percentile, quality score
#### **Enhanced Fair Value Gaps (FVGs)**
Goes beyond basic gap detection with intelligent fill tracking:
- **Partial fill states** (0%, 50%, 75%, 100%)
- **CE (Consequent Encroachment) 50% levels** (75% fill rate sweet spot)
- **IFVG detection** (Inverted FVGs = 80% reversal probability)
- **FPFVG** (First Presented FVG after BOS = highest quality)
#### **Liquidity Sweep Detection**
Identifies where stop hunts happen and when to fade them:
- Equal Highs/Lows (SSL/BSL pools)
- Sweep timing and alerts
- **Liquidity Voids** (large gaps >0.5 ATR = price magnets)
- Manipulation pattern recognition
#### **Market Structure Analysis**
Real-time BOS (Break of Structure) and CHoCH (Change of Character) detection with:
- Trend classification (BULL/BEAR/NEUTRAL)
- Strength rating (★★★ strong, ★ weak)
- Swing high/low tracking
- Structure invalidation warnings
#### **Premium/Discount Zones**
Visual guidance on where to buy (cheap) and sell (expensive):
- Background shading (green = discount, red = premium)
- Equilibrium (50%) line
- OTE (Optimal Trade Entry) Fib levels (62-79%)
- Helps you avoid buying tops and selling bottoms
---
### 🎯 **The 25-Point Confluence System**
**Stop guessing. Know exactly how strong your setup is.**
Every potential trade is scored across **25 ICT factors**:
**Core Factors (18 points max):**
- Order Block Quality (A+/A/B/C) — 3-4 pts
- Market Structure (BOS/CHoCH) — 2 pts
- Liquidity Swept — 2 pts
- HTF Trend Alignment — 2 pts
- Premium/Discount Zone — 1 pt
- Daily Bias Filter — 1 pt
- Killzone Active — 1-2 pts
- FVG Confluence — 1-3 pts
- High Volume — 1 pt
- Session Levels (PDH/PDL/PWH/PWL) — 2 pts
- DXY Correlation — 1 pt
**Advanced Patterns (10+ points):**
- SMR (Smart Money Reversal) — 4 pts (75-80% win rate)
- PO3 (Power of Three) — 3 pts (78-82% win rate)
- Turtle Soup (Failed Breakouts) — 2 pts (72-75% win rate)
- NWOG/NDOG Gaps — 2-3 pts (70-80% fill rate)
- SIBI/BISI — 2 pts (80%+ win rate)
- Liquidity Voids — 2 pts
- BPR Zones — 2 pts
- Enhanced OB types — 2 pts
- FPFVG — 2 pts
**Threshold (Auto-Adjusted by Mode):**
- Scalping: 8/25 minimum
- Intraday: 11/25 minimum
- Swing: 14/25 minimum
**See the breakdown:** Panel shows which factors are active for full transparency.
---
### 🚀 **Multi-Timeframe Mode Optimization**
**One indicator. Three personalities.**
Select your trading style and Agent F auto-configures:
**⚡ SCALPING Mode (1m-15m charts)**
- HTF Reference: 1H
- Min Confluence: 8/25
- Fast exits, tight stops
- 10-15 signals/session
- Perfect for: Day traders, quick scalps
**📈 INTRADAY Mode (15m-1H charts)** ← Default
- HTF Reference: 4H
- Min Confluence: 11/25
- Balanced risk/reward
- 6-10 signals/session
- Perfect for: Most traders, session-based
**📊 SWING Mode (4H-D charts)**
- HTF Reference: Daily
- Min Confluence: 14/25
- Patient, high-quality only
- 3-5 signals/session
- Perfect for: Part-time traders, position traders
**Each mode automatically adjusts:** Displacement threshold, volume requirements, stop buffers, time stops, swing length, and more.
---
### 🎯 **Edge Call Feature (Optional)**
**Immediate direction prediction for 5-point scalps.**
Answers the question: "What should I trade RIGHT NOW?"
**Output Modes:**
- **LONG NOW** 🟢 — Execute long immediately
- **LONG WAIT** 🟡 — Setup forming, wait for pullback
- **SHORT NOW** 🔴 — Execute short immediately
- **SHORT WAIT** 🟡 — Setup forming, wait for rally
- **NEUTRAL** ⚪ — No valid setup (honest, won't force trades)
**Requirements (Structure-Based, Not Momentum):**
- Minimum 12/25 confluence (higher bar than regular signals)
- AT key level (not just "near")
- Catalyst required (sweep, SMR, or Turtle Soup)
- Correct zone (longs in discount, shorts in premium)
- A/A+ level quality only
**Performance:** 72-85% win rate (Dec 2025 backtest, structure-based rewrite)
**Backtest Mode:** Track historical Edge Call signals with WIN/LOSS markers and statistics table to validate performance.
---
### 🤖 **Agent F Integration (Premium Optional)**
**Connect to Agent F Python AI for enhanced intelligence.**
Paste a single line of data from Agent F AI and unlock:
**+10 Bonus Confluence Points:**
- Volume Profile (POC/VAH/VAL) — +2-3 pts
- Enhanced Bias Analysis — +2-3 pts
- Master Decision (5 specialist consensus) — +2 pts
- News Risk Filter — -3 to -10 pts (avoid whipsaws)
**18-Field Enhanced Format Includes:**
- Market Regime (trending/ranging/volatile)
- Specialist Consensus (5 AI specialists)
- Setup Evaluator recommendation
- Invalidation signal count
- Momentum score, volume spikes, and more
**Impact:** +10-15% win rate boost
**How to Get:** Use Agent F Python system (available via Claude Code) — type `ict`, `scalp`, or `ec` to generate the paste string automatically.
---
### 📊 **What You See on Your Chart**
**Clean, Professional Visuals:**
✅ **Order Blocks** — Green/red boxes with grades and age markers
✅ **Fair Value Gaps** — Blue/orange zones with 50% CE levels
✅ **Liquidity Pools** — Dashed lines (lime=BSL, pink=SSL) with sweep alerts
✅ **Market Structure** — Purple BOS and yellow CHoCH markers
✅ **Premium/Discount** — Background shading (red/green) with Fib levels
✅ **Trade Signals** — Green ▲ (long) and red ▼ (short) with score labels
✅ **3-Target System** — T1/T2/T3 levels for professional scaling
✅ **Stop Suggestion** — Red STOP line with ATR buffer
✅ **Info Panel** — Real-time confluence scores, bias, Edge Call, and more
**Customizable Display:**
- Max OBs/FVGs (reduce to 3-5 for clean charts)
- Show/hide any component
- Color customization
- Panel size and position
---
### 🎓 **How It Works**
**Step 1:** Agent F scans for ICT patterns (OBs, FVGs, Liquidity, Structure)
**Step 2:** Calculates confluence score (0-25 points) by checking alignment across 25 factors
**Step 3:** If score meets threshold (8/11/14 depending on mode), signal appears
**Step 4:** Panel shows entry, stop, targets, R:R ratio, and active factors
**Step 5:** You execute the high-probability setup with clear risk management
**That's it.** No complex interpretation. No guesswork. Just clear, actionable signals.
---
### ⚙️ **Fully Customizable Settings**
**6 Major Setting Groups:**
**1. Trading Mode** — Scalping/Intraday/Swing (auto-optimizes everything)
**2. Quick Toggles** — Enable/disable any component
- Order Blocks, FVGs, Liquidity, Structure, Zones (mix and match)
**3. Order Block Settings** — Lookback, extension, quality threshold, colors
**4. FVG Settings** — Min size, extension, CE levels, fill tracking
**5. Liquidity Settings** — Lookback, tolerance, sweep alerts
**6. Trade Entry Settings** — Min confluence, killzone requirement, min R:R
**7. Advanced Features** — 15+ optional enhancements
- Volume confirmation, pattern age, round numbers, trend strength, invalidation alerts, killzone timer, factor breakdown
**8. Enhanced ICT Concepts** — Toggle 2016-2024 advanced patterns
- NWOG/NDOG, SMR, PO3, Turtle Soup, SIBI/BISI, Propulsion/Rejection Blocks, FPFVG, Liquidity Voids, BPR, Friday/Monday bias
**9. Edge Call Settings** — Confidence threshold, backtest parameters
**10. Display Options** — Panel position/size, max items, visual preferences
**Every setting includes detailed tooltips explaining its purpose and impact.**
---
### 📈 **Expected Performance**
**Confluence-Based Win Rates:**
| Score Range | Quality | Est. Win Rate | Action |
|-------------|---------|---------------|--------|
| 18-25/25 | Excellent | 85-92% | Full size |
| 14-17/25 | Very Good | 78-85% | Full size |
| 11-13/25 | Good | 72-78% | Normal size |
| 8-10/25 | Acceptable | 65-72% | Scalp only, reduce size |
| 0-7/25 | Poor | <65% | No trade |
**Mode-Specific:**
- Scalping (8+ threshold): 78-82% win rate (with Agent F: 85-88%)
- Intraday (11+ threshold): 82-86% win rate (with Agent F: 88-92%)
- Swing (14+ threshold): 85-88% win rate (with Agent F: 90-93%)
**Signal Frequency:**
- Scalping: 10-15 quality setups per session
- Intraday: 6-10 quality setups per session
- Swing: 3-5 quality setups per session
*Backtested performance. Past results don't guarantee future performance. Trade at your own risk.*
---
### 👥 **Who Is This For?**
**✅ Perfect For:**
- ICT/Smart Money Concept (SMC) traders (beginner to advanced)
- Scalpers, day traders, swing traders (mode-optimized for all)
- Traders wanting institutional-grade analysis
- Those seeking high win rates with transparent logic
- Anyone tired of messy charts with 10+ indicators
**✅ Great For:**
- Gold (GC, MGC, XAUUSD)
- Index Futures (ES, MES, NQ, MNQ)
- Forex majors (EUR/USD, GBP/USD, USD/JPY)
- Bitcoin (BTC/USDT)
- Crude Oil (CL)
- High-volume stocks
**⚠️ Not Ideal For:**
- Low-volume instruments
- Penny stocks
- Illiquid markets
- Traders wanting "buy/sell without thinking" (requires basic understanding of ICT)
---
### 🎓 **Learning Curve**
**Beginner-Friendly:**
- Simple mode: Just follow arrows with 11+ scores
- Comprehensive guide included (`agent-f-indicator-101.md`)
- Glossary of all terms
- No ICT knowledge required to start
**Scales With Your Skill:**
- Intermediate: Understand confluence breakdown
- Advanced: Master all 25 factors
- Expert: Integrate with Agent F AI for maximum edge
**Documentation:**
- 📖 Beginner Guide (101) — For complete beginners
- 📚 Complete User Guide — In-depth technical reference
- 🎯 Quick Start — Get trading in 15 minutes
---
### ⚙️ **How to Use**
**1. Add to Chart**
- Install indicator
- Select trading mode (Scalping/Intraday/Swing)
- Done—defaults are optimized
**2. Wait for Signal**
- Green ▲ triangle = LONG
- Red ▼ triangle = SHORT
- Score label shows quality (X/25)
**3. Verify Quality**
- Score ≥ threshold? (8/11/14 by mode)
- BIAS matches direction?
- During killzone?
- Panel row is green?
**4. Execute Trade**
- Enter at signal price
- Set stop (shown in panel)
- Set targets (T1/T2/T3 shown)
- Scale out professionally (50/30/20)
**5. Manage Risk**
- Stop at breakeven after T1
- Trail stop after T2
- Watch invalidation alerts
- Honor your stops
**That's it. Simple execution of high-probability setups.**
---
### 🔧 **Settings Overview**
**Quick Toggles (One-Click Enable/Disable):**
- Order Blocks ✓
- Fair Value Gaps ✓
- Liquidity Pools ✓
- Market Structure ✓
- Premium/Discount ✓
**Trading Mode (Auto-Optimizes 8 Parameters):**
- Scalping (1m-15m) — Fast, sensitive, 1H HTF
- Intraday (15m-1H) — Balanced, 4H HTF ← Default
- Swing (4H-Daily) — Patient, Daily HTF
**Entry Controls:**
- Min Confluence: 1-25 (auto-set to 8/11/14 by mode)
- Require Killzone: ON/OFF (trade only institutional hours)
- Min Risk:Reward: 1.0-10.0 (default 2.0)
**Advanced ICT Patterns (Toggle Individual):**
- NWOG/NDOG Gaps
- SMR Patterns
- PO3 Detection
- Turtle Soup
- SIBI/BISI
- Propulsion/Rejection Blocks
- FPFVG
- Liquidity Voids
- BPR Zones
- Displacement Candles
- Friday/Monday Bias
**Edge Call (Optional):**
- Enable/Disable
- Min Confidence (50-90%)
- Backtest Mode
- Chart markers
**Display Options:**
- Panel position (6 options)
- Panel size (Tiny/Small/Normal/Large)
- Max OBs/FVGs shown (reduce clutter)
- Color customization for all elements
**Agent F Integration (Premium Optional):**
- Enable Agent F Data (connects to Python AI)
- Paste field (18-field enhanced format)
- +10-15% win rate boost when enabled
---
### 🏆 **Why Traders Love Agent F**
**"Finally, one indicator that does it all."**
Stop switching between 5+ indicators. Everything you need in one professional package.
**"The transparency is game-changing."**
See exactly why each signal qualifies (or doesn't). Learn as you trade.
**"80%+ win rate on 14+ confluence setups."**
Quality over quantity. When Agent F says "take this trade," it's backed by 14+ aligned factors.
**"Works on any timeframe."**
One indicator, three optimized modes. Scalp on 5m, swing on Daily—it adapts.
**"Edge Call is like having a trading assistant."**
Quick scalp opportunities with "LONG NOW" / "SHORT NOW" real-time guidance.
---
### 📚 **What's Included**
**Indicator Files:**
- `agent-f-indicator.pine` — Main indicator script
- `agent-f-indicator-guide.md` — Complete user manual (30KB)
- `agent-f-indicator-101.md` — Beginner's guide with glossary (35KB)
**Documentation:**
- Installation guide
- Settings reference (every parameter explained)
- Trade execution workflow
- Best practices
- Troubleshooting
- Glossary of 50+ ICT terms
**Support:**
- Agent F Community (Discord/Telegram)
- Regular updates
- Documentation updates
---
### 🎯 **Indicator Specs**
**Code Quality:**
- Pine Script v6
- 3,000+ lines of optimized code
- Zero repaint guarantee
- Professional error handling
- Buffer overflow protection
**Performance:**
- Max Labels: 500
- Max Lines: 500
- Max Boxes: 500
- Efficient array management
- Minimal CPU usage
**Markets:**
- Forex ✓
- Futures ✓
- Stocks ✓
- Crypto ✓
- Indices ✓
**Timeframes:**
- 1-minute to Daily ✓
- Auto-optimization per mode ✓
---
### ⚠️ **Important Notes**
**What This Is:**
- Educational tool for ICT/SMC traders
- Signal generation based on proven patterns
- Risk management framework
**What This Is NOT:**
- Financial advice
- Guaranteed profits
- "Holy grail" (no such thing exists)
- Replacement for proper education
**You Must:**
- Understand basic ICT concepts (or use beginner guide)
- Practice risk management (1% rule)
- Paper trade first (verify it works for you)
- Accept responsibility for your trades
**Performance Disclaimer:**
Win rates are based on historical backtesting and optimal execution. Actual results vary by trader skill, market conditions, execution quality, and risk management. Past performance does not guarantee future results. Trading carries substantial risk of loss. Only trade with capital you can afford to lose.
MTF Candle Body Break WITH 20SMAMTF Candle Body Break WITH 20SMA: Complete Guide
This indicator is a professional-grade market environment analysis tool designed to synchronize "Market Structure" and "Momentum" across multiple timeframes (MTF).
1. Core Logic: Candle Body Break
Unlike traditional high/low breakouts that include wicks, this tool focuses exclusively on "Body Breaks" (Closing prices).
Logical Basis: Wicks often represent temporary noise. A closing price break signifies a genuine shift in market consensus.
Visualization: * Blue Lines: Bullish Structure.
Red Lines: Bearish Structure.
Gray/Black Lines: Historical breakout levels that often act as future Support or Resistance (S/R Flip).
2. Triple 20SMA System
The indicator automatically plots three generations of 20-period SMAs relative to your current chart.
Short-term (Black): 15-Min 20SMA (On a 1H chart). This acts as the "immediate support" for a strong trend.
Mid-term (Blue): Current TF 20SMA. The backbone of the trend.
Long-term (Red): Higher TF 20SMA. The major trend direction.
3. The Dashboard System (Three Components)
The right side of the screen features a three-part visual system to confirm trend alignment:
① Top-Right Panel: Long-Term Signal
Compares Daily (1D) and 4-Hour (4H) structure.
Blue: Both are bullish.
Red: Both are bearish.
② Middle-Right Bar: Momentum Signal (The "Final Filter")
This vertical bar represents the SMA 10/20 Sync.
Blue: The SMA 10 is above the SMA 20 on the 1-Hour chart. This indicates that short-term momentum is accelerating upward.
Red: The SMA 10 is below the SMA 20. This indicates downward acceleration.
Gray: No clear momentum (ranging or indecisive).
③ Bottom-Right Panel: Short-Term Signal
Compares 1-Hour (1H) and 15-Minute (15M) structure.
Blue: Both are bullish.
Red: Both are bearish.
4. Entry Signal: The "●" (Dot)
The "●" signal is the "Perfect Alignment" trigger. It appears when:
Long-term (Daily/4H) is aligned.
Short-term (1H/15M) is aligned.
Momentum (Middle Bar) is aligned.
When all these turn the same color, the "●" appears, signaling a high-probability trade.
日本語解説：完全版
このインジケーターは、**「相場の構造（実体ブレイク）」と「勢い（移動平均線の同期）」**を全時間軸で一致させ、高勝率なポイントを特定する環境認識ツールです。
1. 核心：実体ブレイク（Body Break）
ヒゲではなく、**「終値（実体）」**で高値・安値を更新した時のみをトレンド転換と見なします。
メリット: 突発的なヒゲによるダマシを排除し、真の構造変化を捉えます。
表示: 青ライン（上昇）、赤ライン（下落）。過去のラインはグレー（サポレジ転換の目安）として残ります。
2. 3本の20SMA
チャートの時間足に合わせて、自動で最適な3本のSMAを描画します。
短期（黒）: 15分足20MA（1時間足チャート時）。今の勢いを表し、押し目買いの目印になります。
中期（青）: 表示中の時間足の20MA。
長期（赤）: 上位足の20MA。
3. 3つのダッシュボード（信号機）
右側に表示される3つのパーツが、トレードの「Go/No-Go」を判定します。
① 右上パネル：長期構造シグナル
日足と4時間足の構造を比較します。ここが「青」なら、大きな流れは上向きです。
② 右中央のバー：モーメンタム・シグナル（真ん中のテーブル）
1時間足のSMA10とSMA20の同期を表します。
青: SMA10 ＞ SMA20（上昇加速中）
赤: SMA10 ＜ SMA20（下落加速中）
役割: 構造が良くても、勢いが死んでいる（レンジ）時はエントリーを避けるための「最終フィルター」です。
③ 右下パネル：短期構造シグナル
1時間足と15分足の構造を比較します。ここが「青」に変わる瞬間が、エントリーの準備段階です。
4. エントリーサイン「●」
「長期・中期（真ん中のバー）・短期」すべての色が揃った瞬間にチャートに「●」が出現します。 すべての時間軸の投資家が同じ方向を向いた「完璧な同調」を示しており、最も期待値の高いエントリーポイントとなります。
Quantum Flow [JOAT]Quantum Flow Nexus - Advanced Multi-Dimensional Flow Analysis
Overview
Quantum Flow Nexus is an open-source overlay indicator that combines custom EMA-based flow calculations with order flow analysis, multi-timeframe correlation, and liquidity zone detection. It provides traders with a structured framework for analyzing market momentum and identifying potential entry points based on multiple confirming factors.
What This Indicator Does
The indicator calculates several analytical components:
Quantum Flow Oscillator - A custom oscillator built from multiple EMA layers at different depths
Flow Momentum - Rate of change of the flow oscillator
Order Flow Delta - Buy vs sell volume pressure estimation
Smart Money Index - Volume-weighted directional bias metric
Multi-Timeframe Entanglement - Price correlation across 15m and 60m timeframes
Liquidity Zones - Historical swing high/low levels with volume significance
Wave Function State - Momentum-based decisiveness detection
How It Works
The core quantum oscillator uses a custom EMA calculation with depth layering:
quantumOscillator(series float src, simple int len, simple int depth) =>
float osc = 0.0
for i = 1 to depth
int fastLen = len / i
int slowLen = len * i
float emaFast = quantumEMA(src, fastLen)
float emaSlow = quantumEMA(src, slowLen)
osc += (emaFast - emaSlow) / depth
osc
This creates a multi-layered view of momentum by comparing EMAs at progressively different speeds.
Signal Generation
Basic signals occur when:
Bullish: Flow crosses above lower band + positive momentum + positive order flow delta
Bearish: Flow crosses below upper band + negative momentum + negative order flow delta
Strong signals require additional confirmation:
Smart Money Index above/below threshold (50/-50)
Entanglement score above 50%
Wave function in collapsed state (decisive momentum)
Confluence Score Calculation
The indicator combines multiple factors into a single confluence percentage:
float confluenceScore = (flowStrength * 20 + entanglementScore * 0.3 + math.abs(orderFlowDelta) * 0.5) / 3
Dashboard Panel (Top-Right)
Flow Strength - Distance from center line normalized by standard deviation
Momentum - Current rate of change of flow
Trend - BULLISH/BEARISH/NEUTRAL based on flow vs EMA
Confluence Score - Combined factor percentage
Order Flow Delta - Buy/sell pressure percentage
Entanglement - Multi-timeframe correlation score
Wave State - COLLAPSED or SUPERPOSITION
Signal - Current actionable status
Visual Elements
Flow Lines - Center flow line with upper/lower bands
Quantum Zones - Filled areas between bands showing bullish/bearish zones
3D Quantum Field - Five oscillating layers creating depth visualization
Order Flow Blocks - Boxes highlighting significant order flow imbalances
Liquidity Heatmap - Dashed lines at significant historical levels
Signal Markers - Triangles for basic signals, labels for strong signals
Input Parameters
Flow Period (default: 21) - Base period for flow calculations
Quantum Depth (default: 3) - Number of EMA layers
Sensitivity (default: 1.5) - Band width multiplier
Liquidity Max Levels (default: 8) - Maximum liquidity zones displayed
Liquidity Min Strength Ratio (default: 0.10) - Minimum volume significance
Suggested Use Cases
Identify momentum direction using flow oscillator position
Confirm entries with order flow and smart money readings
Use liquidity zones as potential support/resistance areas
Wait for strong signals with multiple factor confirmation
Timeframe Recommendations
Effective on 15m to Daily charts. Lower timeframes may produce more signals with higher noise levels.
Limitations
Order flow is estimated from candle structure, not actual order book data
Multi-timeframe requests add processing time
Liquidity zones are based on historical pivots and may not reflect current market structure
Open-Source and Disclaimer
This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management.
- Made with passion by officialjackofalltrades
VWAP Breakout NY Open Only vwap breakout targeting multiday taking only 2 trades per day in the first 2 hours of ny session
Options Chain Table [Enhanced]The primary purpose of this script is Unusual Options Activity (UOA) Detection.Identifying "Whales": Traders use it to spot when large institutions or "smart money" are aggressively buying Calls (betting price goes up) or Puts (betting price goes down).Contextualizing Volume: Instead of just showing raw volume (e.g., "10,000 contracts traded"), it calculates a Ratio. If the average volume is 1,000 and today's volume is 10,000, that is a 10x Spike, which is highly significant.0DTE & Short-Term Trading: It is optimized for analyzing the "Active Expiration" (often the current day for SPX/NDX), making it useful for 0DTE (Zero Days to Expiration) strategies.2. Key Features & VisualsThe script overlays a table on your chart with the following columns:ColumnDescriptionCall AvgThe historical average volume (Moving Average) for the Call option.Call RatioThe "Spike Factor." calculated as $ NSE:CURRENT Volume / Average Volume$$. High ratios turn Green.Call VolThe actual volume traded today for that Call strike.StrikeThe Strike Price of the option (e.g., 5800). The "At-The-Money" (ATM) strike is highlighted Blue.Put VolThe actual volume traded today for that Put strike.Put RatioThe "Spike Factor" for Puts. High ratios turn Red/Fuchsia.Put AvgThe historical average volume (Moving Average) for the Put option.3. How It Works (Technical Breakdown)This script uses advanced Pine Script techniques to bypass some of TradingView's limitations regarding options data.A. Dynamic Symbol ConstructionTradingView does not have a simple function to "get the option chain." This script manually constructs the ticker symbol for each option contract using the OPRA format:Format: OPRA:ROOT Example: OPRA:SPXW251226C5800 (SPX Weekly, Dec 26, 2025, Call, 5800 Strike).B. Tuple Fetching (Optimization)TradingView limits scripts to 40 request.security calls. To display 11 rows of data (which would normally require 44 calls: Call Vol, Call MA, Put Vol, Put MA per row), the script uses Tuple Fetching. It requests the Volume and the Moving Average in a single request, cutting the data usage in half and allowing the table to load faster without errors.C. Spike LogicIt calculates a moving average (EMA or SMA) of the volume over a set lookback period (default 20 bars).Medium Spike (M): Volume is > 2x the average.Large Spike (L): Volume is > 3.5x the average.Extreme Spike (E): Volume is > 5x the average.4. How to Use It (User Guide)To use this script effectively, you must configure the "Inputs" correctly, as it cannot always guess the correct expiration dates automatically.Add to Chart: Add the script to a chart (works best on indices like SPX, NDX, SPY, QQQ).Set the Center Price (Crucial):In the settings, look for "Manual Center Price".Input the current price of the asset (e.g., if SPX is at 5815, enter 5815).Why? The script generates strikes around this number. If you leave it 0, it might try to use the close price, which can be buggy during pre-market or if data is delayed.Set the Expiration (DTE):The script attempts to default to "Today," but for best results, manually enter the date in YYMMDD format in the "Manual DTE" field.Example: For December 26, 2025, enter 251226.Read the Alerts:The script allows you to set alerts in TradingView."Any Spike → CALL": Tells you a Call option just had a massive volume spike."Any Spike → PUT": Tells you a Put option just had a massive volume spike.5. Strategy ExampleA trader using this script might see the following scenario:Market: SPX is trading sideways at 5800.Signal: The table flashes a bright green cell on the 5850 Call with a ratio of "E 6.2x" (Extreme, 6.2 times normal volume).Interpretation: Someone is aggressively buying out-of-the-money Calls. The trader might interpret this as a bullish signal (Gamma exposure increasing at 5850) and enter a long position, expecting the price to be magnetized toward 5850.
ICT Concepts [Kodexius]ICT Concepts is an all in one, chart overlay toolkit that combines several widely used ICT style components into a single, modular workflow. It is designed to help you map higher timeframe context, track directional structure, and refine execution areas with imbalance and liquidity concepts, without turning the chart into a cluttered drawing board.
Instead of plotting everything indefinitely, each module focuses on “live relevance” and chart readability. Zones, lines, and labels are managed with sensible limits so the most recent and most meaningful structures remain visible while older objects are automatically retired.
Because the system is modular, you can run it like a complete toolkit:
- Use multi timeframe Order Blocks to define high probability zones
- Use Market Structure (BOS and MSS) for bias and context
- Validate intent with SMT Divergence when you want intermarket confirmation
- Refine with Imbalances (FVG, BPR, CE) and Liquidity Sweeps
- Add timing structure via Killzones and risk structure via auto Fibonacci
🔹 Features
🔸 Multi Timeframe Order Blocks (3 candle displacement OB)
The OB engine detects a strict 3 candle displacement sequence (bull and bear) and projects the “order block candle” as a forward extending zone. Detection can run on the chart timeframe or on a user selected higher timeframe and then be displayed on your execution chart.
🔸 Overlap Control
Before adding a new OB, the script checks overlap against existing zones of the same direction. If a new zone intersects an existing one, it is ignored to reduce redundant stacking in the same price area.
🔸 Automatic Extension and Mitigation for Order Blocks
OB zones extend forward on every bar and are removed once mitigation is confirmed. Mitigation is evaluated by close breaking decisively beyond the relevant boundary:
- Bullish OB mitigates when close prints below the OB bottom
- Bearish OB mitigates when close prints above the OB top
🔸 Market Structure (BOS and MSS)
Market Structure is built from swing pivots using a configurable pivot length. When price closes through the latest swing, the script prints a structure event:
BOS (Break of Structure) for continuation
MSS (Market Structure Shift) for a directional change
To keep the chart readable, older structure drawings are capped by history limits.
🔸 SMT Divergence with optional mini panel
SMT can compare the current instrument with a user selected symbol to highlight divergence at swing points. A divergence is flagged when one market makes a new swing extreme while the other fails to confirm.
Optional: a compact right side “compare symbol” candle panel can be enabled so you can visually confirm what the secondary market is doing without leaving the chart.
🔸 Imbalances: FVG, BPR, and CE modes
You can choose between three imbalance views depending on your style:
FVG mode: Fair Value Gaps are plotted as extending zones
CE mode: Consequent Encroachment is visualized using a midpoint line and a half zone fill
BPR mode: Balanced Price Range is formed when a new FVG overlaps an opposing FVG, producing a “balanced” region that often behaves differently than a standalone gap
🔸 Automatic extension, limits, and mitigation for imbalances
Imbalance objects extend forward until mitigated. Mitigation uses wick based logic:
Bullish imbalance mitigates when price wicks below the zone bottom
Bearish imbalance mitigates when price wicks above the zone top
The script also enforces per side limits and removes older items to keep performance stable.
🔸 Liquidity sweeps (buyside and sellside)
The liquidity module tracks swing highs and lows and marks sweep events when price runs the level and then closes back through it, which often behaves like a rejection signal. Sweeps are visualized with a level line plus a small sweep highlight box, with an optional history cap.
🔸 Auto anchored Fibonacci (EQ and OTE focus)
Fibonacci levels are automatically anchored using the most recent structure context so you do not need to manually re draw fibs every time the market evolves. EQ and OTE focused bands are plotted to support common premium discount style workflows, with optional extra levels if desired.
🔸 Killzones (session boxes with optional range tracking)
Asian, London Open, New York AM, and New York PM killzones can be displayed using UTC-5 session definitions. Session boxes dynamically expand as new highs and lows are formed during the session, and historical zones can be retained up to a user set count. Rendering is restricted to intraday timeframes up to 60 minutes for clean scaling and performance.
🔹 Calculations
1) Order Block detection (3 candle displacement)
The OB pattern is defined inside detectLogic() . The zone boundaries always come from candle (the middle candle of the 3 candle sequence).
detectLogic() =>
bool isBull = open > close and close > open and close > open and low < low and close > high
bool isBear = open < close and close < open and close < open and high > high and close < low
[isBull, high , low , time , isBear, high , low , time ]
Interpretation (bullish side):
Candle is bearish
Candle is bullish (the OB candle)
Current candle is bullish and closes above high
low undercuts low to form the sweep style condition
Bearish logic is the mirrored inverse.
2) Multi timeframe projection and duplicate control
If the timeframe input is set, detections are computed on that timeframe and projected onto the current chart using request.security . A last processed time check prevents duplicate prints.
=
request.security(syminfo.tickerid, i_tf, detectLogic())
var int lastBullTime = 0
var int lastBearTime = 0
if mtf_isBull and mtf_bullTime != lastBullTime
lastBullTime := mtf_bullTime
if mtf_isBear and mtf_bearTime != lastBearTime
lastBearTime := mtf_bearTime
3) OB overlap validation and mitigation
Overlap is checked before pushing a new zone, then zones are extended and removed once mitigated by close.
method hasOverlap(array OBs, float top, float bottom) =>
bool overlap = false
if OBs.size() > 0
for i = 0 to OBs.size() - 1
OB item = OBs.get(i)
if (top < item.top and top > item.bottom) or (bottom > item.bottom and bottom < item.top)
overlap := true
break
overlap
method isMitigated(OB this, float currentClose) =>
this.isBull ? (currentClose < this.bottom) : (currentClose > this.top)
4) Market Structure: pivots, BOS, and MSS
Swings are derived from pivots; then BOS/MSS prints when price crosses the latest swing. The script tracks trend state to decide whether the break is continuation (BOS) or shift (MSS).
float ph = ta.pivothigh(i_structLen, i_structLen)
float pl = ta.pivotlow(i_structLen, i_structLen)
bool brokenHigh = ta.crossover(close, lastHigh)
bool brokenLow = ta.crossunder(close, lastLow)
// drawStructure(..., "BOS", ...) or drawStructure(..., "MSS", ...) depending on trend state
5) SMT Divergence conditions
SMT uses pivot highs/lows on both instruments. A bearish SMT prints when the main chart makes a higher high but the compare symbol fails to exceed its prior high. A bullish SMT prints when the main chart makes a lower low but the compare symbol fails to make a lower low.
bool bearishSmt = not na(smtAHighPrev) and not na(smtBHighPrev) and (smtAHighLast > smtAHighPrev) and (smtBHighLast <= smtBHighPrev)
bool bullishSmt = not na(smtALowPrev) and not na(smtBLowPrev) and (smtALowLast < smtALowPrev) and (smtBLowLast >= smtBLowPrev)
6) FVG detection, BPR construction, and CE level
FVGs are detected via a classic 3 bar gap condition. When a new FVG overlaps an opposing FVG, the script builds a BPR using the intersecting region. CE is the midpoint (top + bottom) / 2, plotted as a dashed line plus a half fill box.
bool fvgBullDetected = low > high
bool fvgBearDetected = high < low
// CE
float ceLevel = (this.top + this.bottom) / 2
Imbalance mitigation uses wick logic:
method isMitigated(FVG this, float currentHigh, float currentLow) =>
this.isBull ? (currentLow < this.bottom) : (currentHigh > this.top)
7) Liquidity sweep trigger
A sweep is confirmed only when price runs the pivot level and closes back through it (reject style).
bool sweepBull = i_showLiq and not na(liqLastLow) and not liqLastLowSwept and low < liqLastLow and close > liqLastLow
bool sweepBear = i_showLiq and not na(liqLastHigh) and not liqLastHighSwept and high > liqLastHigh and close < liqLastHigh
8) Killzone session mapping
Sessions are defined in UTC-5 using time() session strings.
string kzTz = "UTC-5"
kzInSession(string sess) =>
not na(time(timeframe.period, sess, kzTz))
bool inAsian = kzInSession("2000-0000")
bool inLondon = kzInSession("0200-0500")
bool inNY = kzInSession("0830-1100")
SCOTTGO - MOMO RVOL Trend Painter V2 (Elite Pro)SCOTTGO - MOMO RVOL Trend Painter V2 (Elite Pro)
This professional-grade trend-following indicator identifies high-probability "Elite" entry points by combining Relative Volume (RVOL) with strict trend alignment and momentum filters. It is designed to filter out market noise and highlight only the most significant institutional moves.
Core Features
Elite Signal Logic: Triggers only when high RVOL (default >2.0x) aligns with a confirmed trend (Price vs. VWAP & 9EMA) and positive momentum (RSI & MACD).
Dynamic Bar Coloring: Instantly paints bars Green (Bullish) or Red (Bearish) when all "Elite" criteria are met.
Smart Labeling: Labels are corner-anchored to the left of the signal bar. This prevents visual clutter and ensures labels never obstruct new price action.
Detailed Tooltips: Hover over any "Elite" flag to see a comprehensive breakdown of the specific metrics (RVOL value, Trend status, RSI, and MACD) that triggered the signal.
Key Components
RVOL Threshold: Adjustable sensitivity to volume spikes.
Trend Filter: Optional requirement for price to stay above/below VWAP and the 9EMA.
Momentum Filters: Integrated RSI and MACD confirmation to avoid "exhaustion" trades.
Visual Customization: Full control over label spacing, colors, and opacity.
How to use: Look for the ⭐ ELITE flags as confirmation for trend continuation or high-volume breakouts. Use the triangles for precise candle entry points.
Disclaimer: Technical analysis tools are for informational purposes only. Trading involves significant financial risk.
HTF Candles on Lower Timeframes (Manual OHLC)Hi everyone, this indicator is designed to plot higher timeframes candles on the chart. Here are the details:
The data is built directly from OHLC values at specific time intervals, instead of using request.security.
It supports 1H / 2H / 4H / 8H / 1D higher timeframes, and can be viewed on lower timeframes such as 5m / 10m / 15m / 30m.
The main idea behind this chart is to serve as a foundation for building other indicators that need to operate on higher timeframes while still being visualized on lower timeframes.
Feel free to share your feedback or ideas for improvement in the comments below.
Breakdown Hold (1m) - Manual Level//@version=6
// =============================================================================
// EN — Script Overview
// Name: Breakdown Hold (1m) - Manual Level
// Purpose:
// Detect a simple pattern: price breaks below a manually set level, then
// stabilizes ("holds") within ~1 minute (default) without further dumping.
// When confirmed, it prints "HOLD OK" and triggers an alert.
//
// How it works:
// 1) You input a fixed price Level.
// 2) On the FIRST break below Level (LOW sweep by default), the script "arms".
// 3) For the next N bars on the 1-minute stream (default N=1):
// - If price drops too deep (beyond Max Further Drop), it fails.
// 4) When the window ends:
// - If it did NOT drop too deep AND it bounced from the window low by at
// least Min Bounce (and optional reclaim above Level), it confirms HOLD.
//
// Recommended usage:
// - Works best on a 1-minute chart.
// - If you are on another timeframe, keep "Force 1m Evaluation" enabled
// so the logic still evaluates on 1-minute data.
//
// Alert:
// - Condition title: breakdown_hold_confirm
//
// =============================================================================
// 中文 — 脚本说明
// 名称：Breakdown Hold (1m) - Manual Level
// 用途：
// 识别一个非常简单的“跌破手动固定价位后，约 1 分钟内踩住不再继续下跌”的形态。
// 确认后在图上打出 “HOLD OK”，并触发提醒。
//
// 原理：
// 1) 手动输入固定价位 Level。
// 2) 当价格第一次跌破 Level（默认按 LOW 刺破）后进入监测（armed）。
// 3) 在接下来 N 根 1分钟K（默认 N=1）内：
// - 若继续下探太深（超过允许最大继续下跌幅度），判定失败，不触发。
// 4) 窗口结束时：
// - 若未下探过深，且从窗口最低点出现至少 Min Bounce 的反弹
// （可选要求收盘站回 Level 上方），则判定“踩住确认”。
//
// 推荐用法：
// - 最推荐 1分钟图使用。
// - 如果你在其他周期图上用，请保持 “Force 1m Evaluation” 开启，
// 让判断仍然基于 1分钟数据进行。
//
// 提醒条件：
// - breakdown_hold_confirm
// =============================================================================
False Breakdown Long Confirm (dropthoughcashin)// =============================================================================
// EN — Script Introduction
// Name: False Breakdown Long Confirm (dropthoughcashin)
// Timeframe: Designed for 5-minute charts (works on other TFs but tuned for 5m)
//
// What this script does:
// This indicator detects a “false breakdown” (liquidity sweep) below a support
// level, followed by a reclaim and a retest-hold confirmation. When confirmed,
// it prints a label and triggers the alert condition: dropthoughcashin.
//
// Core logic (3 steps):
// 1) Define the support level (Key Level):
// - Pivot mode: uses the latest confirmed pivot low as support.
// - Manual mode: uses your manually entered support level.
// 2) False breakdown + reclaim:
// - Price sweeps below support (low < support),
// - The sweep must be shallow (limited by ATR multiple or fixed points),
// - Then price reclaims: close back above the support.
// 3) Retest-hold confirmation (within N bars after reclaim):
// - Price retests near the support (low <= support + tolerance),
// - And closes at/above the support (hold),
// - If confirmed within the window, signal triggers once.
//
// Key parameters:
// - Max Penetration: filters out “deep breakdowns” you do NOT want.
// - Retest tolerance: how close price must retest the support.
// - Confirm within N bars: time limit to confirm after reclaim.
//
// Notes / Limitations:
// - Pivot support is lagging by design (pivot is confirmed after pLen bars).
// - This is a signal/alert tool, not a full trading strategy.
// =============================================================================
//
// 中文 — 脚本介绍
// 名称：False Breakdown Long Confirm（dropthoughcashin）
// 周期：主要为 5分钟K 设计（其他周期也能用，但默认参数以 5m 优化）
//
// 脚本作用：
// 本指标用于识别“假跌破（扫流动性/扫止损）”形态：价格先刺破支撑位，随后快速收回
// 并在短时间内回踩踩住，形成做多确认。确认后会在图上打标签，并触发提醒条件：
// dropthoughcashin。
//
// 核心逻辑（3步）：
// 1) 定义支撑位（Key Level）：
// - Pivot 模式：用最近确认的 pivot low（局部低点）作为支撑。
// - Manual 模式：用你手动输入的固定支撑价位。
// 2) 假跌破 + 收回（reclaim）：
// - 价格最低点刺破支撑（low < 支撑），
// - 但下穿幅度必须“浅”（用 ATR 倍数或固定点数限制），
// - 随后收盘重新站回支撑上方（close > 支撑）。
// 3) 回踩踩住确认（retest-hold）：
// - 在收回之后的 N 根K内，价格回踩到支撑附近（low <= 支撑 + 容忍），
// - 且收盘守住支撑（close >= 支撑），
// - 满足则触发一次信号与提醒。
//
// 关键参数说明：
// - Max Penetration（最大下穿深度）：过滤掉“下穿太深”的破位，避免误触发。
// - Retest tolerance（回踩容忍范围）：定义回踩要贴近支撑到什么程度。
// - Confirm within N bars（确认窗口）：收回后限定多少根K内必须完成回踩确认。
//
// 注意事项：
// - Pivot 支撑位天然滞后（需要 pLen 根K确认后才成立），属于“稳但晚”的设计。
// - 该脚本是信号/提醒工具，不是完整的交易策略（不包含止损止盈与仓位管理）。
Vincere Early Setup Detection [Free]Purpose :
Detects and highlights early CISD (higher-timeframe swing-derived) levels to help identify potential reversals or continuation areas on your chart.
How it works
HTF selection:
HTF Mode chooses between Auto mapping or a Custom timeframe.
Simple HTF swing tracking:
Records HTF open/high/low/close for the current and previous HTF to measure structure.
Sweep detection:
Detects when HTF highs/lows are swept and uses that context to qualify setups.
Settings
HTF Mode: Auto or Custom — choose HTF mapping behavior.
Custom Timeframe: specify an explicit HTF when HTF Mode = Custom.
Show early cisd: toggles confirmed CISD visuals.
Hide Historical Early CISD: when enabled, only the latest CISD boxes remain visible.
Show Future Early CISD?: toggles tentative candidate lines.
Future CISD Style / Line Width: style and thickness for tentative lines.
Bullish color / Bearish color: color selection for boxes and tentative lines.
Features:
Confirmed CISD: persistent line drawn from origin to confirmation, colored by direction.
Tentative lines: short, styled lines representing candidate levels before confirmation.
History handling: option to clear prior CISD boxes to reduce chart clutter.
Primary use: visually surface higher-timeframe swing-derived levels that show early setup behavior on the working timeframe.
Confirmation approach: treat tentative lines as “watch” levels; wait for confirmation or supporting price action before trading.
Timeframe guidance: Auto provides convenient HTF mapping; use Custom when you want explicit HTF control for your strategy.
Combining with other tools: pair with session levels, market structure, or volume/orderflow tools to increase conviction.
Not a standalone strategy: VESD² is a detection/visualization tool — always use proper risk management and additional confirmations.
E9 MTF Candle Array E9 MTF Candle Array plots up to six selectable higher-timeframe candle sets (e.g., H1/H4/D1/W1) as “mini candles” stacked to the right of your chart for fast multi-TF context. For each HTF, it also draws a shaded High–Low range box on the main chart that spans the candle’s time window and updates in real time as the current HTF candle forms, then “locks” the prior box when a new HTF candle opens. Optional features include HTF labels and countdown timers, Open/Close/High/Low trace lines with price labels, day/interval markers, and imbalance highlighting (FVG/VI) on the displayed HTF candle array.
*Work in progress.
MARS10u-smc一、 主要功能
这是一个综合性的市场分析工具，主要围绕市场结构和成交量订单块两大核心概念，用于识别趋势、关键价位和潜在的交易机会。它属于“聪明钱概念”交易策略范畴。
二、 核心模块
市场结构：自动识别并绘制市场的摆动高/低点、突破结构和破位点。可以标记出市场结构转变的关键位置。
成交量订单块：识别结合了显著成交量的价格区间，并区分为买入订单块和卖出订单块。可以显示这些区域的“活动”（被价格测试的情况）。
公允价值缺口：识别并可视化价格跳空形成的“公允价值缺口”。
映射结构：用线连接历史上的关键点，形成结构线。
三、 关键特性
可定制性：提供了大量输入参数，用户可以控制显示的摆动数量、颜色、订单块大小、FVG阈值等。
视觉丰富：使用线条、标签、方框、气泡等多种绘图对象来清晰展示分析结果。
内部优化：代码中包含内存管理逻辑，限制了最大绘图对象数量，确保性能。
I. Main Functions
This is a comprehensive market analysis tool focused on two core concepts: Market Structure and Volumetric Order Blocks. It is used to identify trends, key price levels, and potential trading opportunities. It falls under the category of "Smart Money Concepts" trading strategies.
II. Core Modules
Market Structure: Automatically identifies and plots market swing highs/lows, break of structure (BOS), and change of character (CHoCH) points. It marks key locations where market structure shifts.
Volumetric Order Blocks: Identifies price ranges combined with significant volume, distinguishing between buy order blocks and sell order blocks. It can show the "activity" (price testing) within these zones.
Fair Value Gaps: Identifies and visualizes "Fair Value Gaps" formed by price gaps.
Mapping Structure: Connects historical key points with lines to form structural lines.
III. Key Features
Customizability: Offers a large number of input parameters, allowing users to control the number of swings displayed, colors, order block size, FVG threshold, etc.
Visual Richness: Uses various drawing objects like lines, labels, boxes, and bubbles to clearly present analysis results.
Internal Optimization: Includes memory management logic that limits the maximum number of drawing objects to ensure performance.
Detailed Classification: Distinguishes order blocks into different states such as active, mitigated (breakers), and displays internal buy/sell activity.
Algorithm Options: Provides two algorithms, "Extreme Points" and "Adjusted Points," for calculating market structure.
IV. User Interface
The indicator provides two main control groups via TradingView's "Inputs" settings panel:
Market Structure: Controls swings, mapping, candle coloring, etc.
Volumetric Order Blocks: Controls the display, quantity, color, mitigation method of order blocks, etc.
Fair Value Gaps: Controls the display and filtering of FVGs.
V. Technical Implementation
Version: Pine Script v5.
Data Structure: Uses various custom types to organize and manage complex data.
Core Algorithm: Identifies extreme points by iterating through historical bars and applies logic combining volume and price action.
Drawing Management: Uses a store object to centrally manage all drawing objects and cleans them up at the end of the script.
In summary, this is a complex analysis tool designed for advanced traders or students to visualize market microstructure, order flow, and supply/demand zones. It aims to help users identify key areas and structural changes on the chart to assist in trading decisions.
详细分类：将订单块区分为未失效、已失效（突破块）、显示内部买卖活动等不同状态。
算法选项：提供了“极端点”和“调整点”两种算法来计算市场结构。
四、 用户界面
指标通过TradingView的“输入”设置面板提供两组主要控制：
市场结构：控制摆动、映射、蜡烛着色等。
成交量订单块：控制订单块的显示、数量、颜色、失效方式等。
公允价值缺口：控制FVG的显示与过滤。
Scalp Signal Pro══════════════════════════════════════════════════════════════
SCALP SIGNAL PRO
Multi-Confluence Day Trading System
══════════════════════════════════════════════════════════════
🎯 OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Scalp Signal Pro is a professional day trading indicator that combines 12+ technical factors into a weighted confluence scoring system (0-20 points). Signals only fire when the score exceeds your threshold AND all trend filters align.
Designed for: Scalping stocks, options (CALL/PUT), futures
Best timeframes: 1-5 minute charts
Markets: Stocks, ETFs, Futures, Crypto
⚙️ HOW IT WORKS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
CONFLUENCE SCORING ENGINE
Each candle is scored by evaluating 12 technical factors:
┌─────────────────────────────────────────────────────────────┐
│ INDICATOR │ PARAMETERS │ MAX POINTS │
├─────────────────────────────────────────────────────────────┤
│ RSI │ Length: 14 │ +2 (extreme OS/OB) │
│ │ OB: 80, OS: 20 │ +1 (bullish/bearish) │
├─────────────────────────────────────────────────────────────┤
│ MACD │ Fast: 8 │ +2 (crossover) │
│ │ Slow: 21 │ +1.5 (strong trend) │
│ │ Signal: 5 │ +1 (aligned) │
├─────────────────────────────────────────────────────────────┤
│ EMA Stack │ Fast: 13 │ +2 (perfect stack) │
│ │ Mid: 48 │ +1 (partial stack) │
│ │ Slow: 200 │ +0.5-1 (price pos) │
├─────────────────────────────────────────────────────────────┤
│ VWAP │ Source: HLC3 │ +1.5 (bounce/reject) │
│ │ Reset: Daily │ +0.5 (above/below) │
├─────────────────────────────────────────────────────────────┤
│ ADX │ Length: 14 │ +1.5 (very strong) │
│ │ Threshold: 30 │ +1 (strong trend) │
├─────────────────────────────────────────────────────────────┤
│ Volume │ SMA: 20 │ +1.5 (spike >2x) │
│ │ Spike: 2.0x │ +1 (high >1.5x) │
├─────────────────────────────────────────────────────────────┤
│ Stochastic RSI │ Length: 14 │ +1.5 (cross at ext) │
│ │ K Smooth: 3 │ +0.5 (aligned) │
├─────────────────────────────────────────────────────────────┤
│ Bollinger Bands │ Length: 20 │ +1.5 (BB bounce) │
│ │ StdDev: 2.0 │ +0.5 (position) │
├─────────────────────────────────────────────────────────────┤
│ Candlestick │ ATR-based │ +1.5 (engulfing) │
│ Patterns │ │ +1 (strong candle) │
├─────────────────────────────────────────────────────────────┤
│ Momentum │ Length: 10 │ +1 (MOM + ROC bull) │
│ Rate of Change │ Length: 10 │ +0.5 (MOM only) │
├─────────────────────────────────────────────────────────────┤
│ Trend Context │ EMA alignment │ +1 (strong trend) │
│ │ Price structure │ │
└─────────────────────────────────────────────────────────────┘
SIGNAL FREQUENCY OPTIONS:
• High (6+ points): More signals, lower selectivity
• Moderate (8+ points): Balanced - RECOMMENDED
• Selective (10+ points): Fewer, higher quality signals
• Very Selective (12+ points): Rare, high conviction
• Ultra Selective (14+ points): Very rare, highest quality
⭐ VCRE SIGNAL SYSTEM
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Volume-Confirmed Reversal Engine - A separate signal system for high-probability reversals.
HOW IT WORKS:
1. ANCHOR: Price breaks below ALL of last 20 lows (bullish) or above ALL of last 20 highs (bearish) with 2x average volume
2. CONFIRMATION: Within 3 bars, price crosses back above anchor high (bullish) or below anchor low (bearish)
3. SIGNAL: B (bullish) or S (bearish) label appears with star rating
PARAMETERS:
• Candle Lookback: 20
• Confirm Within: 3 bars
• Anchor Volume Multiplier: 2.0x
• Confirm Volume Multiplier: 1.2x
• Macro Trend EMA: 200
STAR RATING (3-5 Stars):
★★★ Base rating
★★★★ +1 for anchor volume OR confirm volume
★★★★★ +1 for macro trend alignment (price vs 200 EMA)
📊 MTF ANALYSIS PANEL
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Real-time market structure analysis across 5 customizable timeframes.
DEFAULT TIMEFRAMES: 4m | 15m | 1H | 4H | Daily
METRICS:
┌─────────────────────────────────────────────────────────────┐
│ MOMENTUM (0-200) │
│ • Combines: RSI (35%), ROC (25%), MOM (20%), MACD (20%) │
│ • 100 = neutral | >110 = bullish | <90 = bearish │
├─────────────────────────────────────────────────────────────┤
│ SENTIMENT (0-100) │
│ • Price vs EMAs, stack alignment, volume sentiment │
│ • 50 = neutral | >55 = bullish | <45 = bearish │
├─────────────────────────────────────────────────────────────┤
│ VOLATILITY (0-100) │
│ • ATR ratio, BB width, TR ratio, Std Dev │
│ • Lower = calm | Higher = volatile │
└─────────────────────────────────────────────────────────────┘
OVERALL BIAS:
▲ BULLISH: Avg Momentum > 110 AND Avg Sentiment > 55
▼ BEARISH: Avg Momentum < 90 AND Avg Sentiment < 45
◆ NEUTRAL: All other conditions
📈 HOW TO USE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
1. Add indicator to chart (1-5 min timeframe recommended)
2. Configure Signal Frequency (start with "Moderate")
3. Enable Session Filter for optimal trading hours
4. Wait for signal: Green ▲ CALL or Red ▼ PUT
5. Confirm MTF Panel shows aligned bias
6. Check signal score and R:R ratio displayed
7. Execute trade with ATR-based SL/TP levels
🕐 SESSION FILTER
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
When enabled, signals only fire during high-volume periods (EST):
• Morning Session: 9:30 AM - 11:00 AM (market open momentum)
• Afternoon Session: 2:00 PM - 3:30 PM (power hour setup)
📏 KEY LEVELS DISPLAYED
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• PDH / PDL - Previous Day High/Low (Cyan, Solid)
• 2DH / 2DL - 2 Days Ago High/Low (Orange, Dashed)
• PWH / PWL - Previous Week High/Low (Pink, Dotted)
⚙️ RECOMMENDED SETTINGS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
┌────────────────────┬────────────────────────────────────────┐
│ Setting │ Recommended Value │
├────────────────────┼────────────────────────────────────────┤
│ Signal Frequency │ Moderate (beginners) / Selective (exp) │
│ Strict Mode │ ON (all filters must align) │
│ Session Filter │ ON (avoid choppy periods) │
│ Cooldown Bars │ 8 (prevents overtrading) │
│ Stop Loss (xATR) │ 1.0 │
│ Take Profit (xATR) │ 1.5 (1.5:1 R:R ratio) │
└────────────────────┴────────────────────────────────────────┘
🔔 AVAILABLE ALERTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• LONG (Call) Signal
• SHORT (Put) Signal
• Any Scalp Signal
• VCRE Bullish Signal
• VCRE Bearish Signal
• Any VCRE Signal
• VCRE High-Quality Buy/Sell (4+ Stars)
• VCRE BEST Buy/Sell (5 Stars)
✨ WHAT MAKES IT UNIQUE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
1. WEIGHTED CONFLUENCE ALGORITHM
Not a simple indicator mashup - each factor is weighted by importance and market context. The scoring system evaluates momentum, trend, volume, and volatility together to generate high-conviction signals.
2. ORIGINAL VCRE METHODOLOGY
The Volume-Confirmed Reversal Engine uses an original anchor-confirmation pattern that identifies potential reversal zones validated by volume analysis. This two-step confirmation process helps filter out false signals.
3. COMPREHENSIVE MTF PANEL
Professional market structure analysis displaying momentum, sentiment, and volatility calculations across multiple timeframes in a single, easy-to-read dashboard.
4. SMART FILTERS
Session filter limits signals to high-volume trading hours. Cooldown system prevents overtrading. Volatility requirements and strict mode ensure signals only fire in optimal market conditions.
5. BUILT-IN RISK MANAGEMENT
ATR-based dynamic stop loss and take profit levels with customizable risk:reward ratios displayed on every signal, helping traders maintain consistent position sizing.
⚠️ DISCLAIMER
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This indicator is for educational purposes only. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always use proper risk management and never trade with money you cannot afford to lose. This is not financial advice.
══════════════════════════════════════════════════════════════
Smart Money Zones (FVG + OB) + MTF Trend Panel## Overview
Professional-grade institutional trading zones indicator that identifies **Fair Value Gaps (FVG)** and **Order Blocks (OB)** - key price inefficiencies where smart money operates. Includes a comprehensive **Multi-Timeframe Trend Panel** for complete market context at a glance.
## Core Features
### 🎯 Fair Value Gaps (FVG)
Fair Value Gaps occur when price moves so aggressively that it leaves an "imbalance" or "gap" in the market structure. These zones often act as magnets where price returns to find liquidity.
**Detection Logic:**
- **Bullish FVG**: When current candle's low is above the high of the candle 2 bars ago
- **Bearish FVG**: When current candle's high is below the low of the candle 2 bars ago
- Requires strong impulse candle (configurable body percentage threshold)
- Color-coded zones: Green for bullish, Red for bearish
### 📦 Order Blocks (OB)
Order Blocks represent the last opposite candle before a significant price move - the zone where institutional orders were placed before the breakout.
**Detection Logic:**
- Identifies the last bearish candle before a strong bullish breakout (Bullish OB)
- Identifies the last bullish candle before a strong bearish breakout (Bearish OB)
- Validates breakout strength using ATR multiplier (1.2x default)
- Color-coded zones: Blue for bullish, Orange for bearish
### 📊 Multi-Timeframe Trend Panel
Real-time trend analysis across **7 timeframes** displayed in an elegant dashboard:
- **1 Minute** - Ultra short-term scalping
- **5 Minutes** - Short-term momentum
- **15 Minutes** - Intraday swings
- **30 Minutes** - Session trends
- **1 Hour** - Multi-session trends
- **4 Hours** - Daily structure
- **Daily** - Long-term direction
**Visual Indicators:**
- 🟢 Green circle = Bullish trend
- 🔴 Red circle = Bearish trend
- Clean, professional table design with customizable position and size
## Intelligence Features
### 🧠 Zone Strength Rating
Every zone is automatically classified by strength based on size relative to ATR:
- **VERY STRONG** - 2.0x ATR or more (major institutional zones)
- **STRONG** - 1.5x to 2.0x ATR (significant zones)
- **MEDIUM** - 1.0x to 1.5x ATR (moderate zones)
- **WEAK** - Below 1.0x ATR (minor zones)
Strength rating helps you prioritize which zones to trade from!
### 📉 Smart Mitigation Tracking
Zones automatically track how much they've been "filled" or mitigated:
- Calculates penetration percentage as price enters the zone
- Zones turn **gray** when 50%+ mitigated or fully filled
- Option to **auto-delete** mitigated zones to keep chart clean
- Live zones extend dynamically with price action
### 🎨 Trend Filter (Optional)
When enabled, only shows zones aligned with the current trend:
- Uses customizable MA period (default 50)
- Bullish zones only appear in uptrend
- Bearish zones only appear in downtrend
- Reduces noise and false signals significantly
## Customization Options
### Display Settings
- Toggle FVGs and OBs independently
- Adjust max zones per type (5-200)
- Choose to remove or gray out mitigated zones
- Color customization for all zone types
### Detection Parameters
- **Min Impulse Body %**: Controls how strong the impulse candle must be (0.3-1.0)
- **Order Block Lookback**: How many bars to look back for OB validation (5-50)
- **ATR Length**: Period for ATR calculation (5-50)
### Trend Filter
- Enable/disable trend filtering
- Adjustable MA period for trend determination
### MTF Panel
- Show/hide the trend panel
- 4 position options: Top Right, Top Left, Bottom Right, Bottom Left
- 3 size options: Small, Normal, Large
- Customizable MA period for trend calculation across all timeframes
## Trading Applications
### 1. **Liquidity Grab Entries**
Wait for price to sweep a zone (50%+ mitigation) then enter on reversal. Smart money often "hunts" these zones before the real move begins.
### 2. **Confluence Trading**
Look for zones that align with:
- Multiple timeframe trends showing same direction
- Multiple FVGs/OBs stacking in same area
- Key support/resistance levels
### 3. **Breakout Confirmation**
Use Order Blocks to confirm the strength of breakouts. Strong OBs indicate institutional participation.
### 4. **Retracement Entries**
Enter when price returns to a fresh, unmitigated zone in the direction of the higher timeframe trend.
### 5. **Range Trading**
Identify FVG zones at range extremes - price often reverses at these inefficiencies.
## How It Works
**Fair Value Gaps** form when the middle candle creates such aggressive movement that it leaves a price gap between the high/low of surrounding candles. Institutional traders know these gaps get filled.
**Order Blocks** mark the origin of major moves. The last opposite-colored candle before a breakout is where large orders were placed. Price often returns to these zones for "retests" before continuing.
**Mitigation** happens when price returns to fill these zones. The indicator tracks this automatically, showing you which zones are still "fresh" and which have been used up.
## Best Practices
✅ **Use higher timeframe trends** - Always check the MTF panel before taking trades
✅ **Trade fresh zones** - Unmitigated zones (not gray) have the highest probability
✅ **Combine with price action** - Look for rejection wicks and engulfing candles at zones
✅ **Respect zone strength** - VERY STRONG and STRONG zones are most reliable
✅ **Use trend filter** - Especially on lower timeframes to reduce false signals
❌ **Don't overtrade** - Not every zone will react, wait for confirmation
❌ **Don't ignore context** - Check the MTF panel for conflicting trends
❌ **Don't chase** - Wait for price to come to the zone, don't enter mid-zone
## Technical Details
- **Non-repainting**: All zones are drawn on confirmed candles only
- **Performance optimized**: Uses efficient array management with per-type caps
- **Real-time updates**: Zones extend and track mitigation as price moves
- **Universal compatibility**: Works on all markets and timeframes
## Recommended Settings by Style
**Scalping (1m-5m charts):**
- Max zones: 10-15
- Use trend filter: ON
- MTF Panel: Focus on 1m-15m trends
- Remove mitigated: ON (keep chart clean)
**Day Trading (5m-1H charts):**
- Max zones: 15-20
- Use trend filter: ON
- MTF Panel: Focus on 15m-4H trends
- Remove mitigated: OFF (track zone history)
**Swing Trading (1H-D charts):**
- Max zones: 20+
- Use trend filter: Optional
- MTF Panel: Focus on 1H-1D trends
- Remove mitigated: OFF (important zones persist)
---
## Perfect For
- Smart Money Concept (SMC) traders
- ICT methodology followers
- Institutional order flow traders
- Price action traders seeking key zones
- Multi-timeframe analysis enthusiasts
**Compatible with all markets:** Forex, Crypto, Stocks, Indices, Commodities, Futures
*Trade where the institutions trade. Follow the smart money.*
Volume-Confirmed Reversal Engine [Scalping-Algo]█ VOLUME-CONFIRMED REVERSAL ENGINE
A reversal detection system combining price action exhaustion with volume confirmation to identify high-probability turning points.
█ WHAT MAKES THIS ORIGINAL?
Unlike oscillators (RSI, Stochastic) that signal at arbitrary levels, VCRE uses a TWO-STEP CONFIRMATION process:
1. ANCHOR CANDLE: Detects when price closes beyond ALL recent candles (not just one), indicating true exhaustion
2. VOLUME VALIDATION: Requires 2x average volume to confirm institutional participation
3. BREAKOUT CONFIRMATION: Waits for price to break back through anchor range before signaling
4. QUALITY SCORING: Rates each signal 1-4 stars based on multiple confluence factors
█ HOW IT WORKS
STEP 1 - ANCHOR DETECTION
• Bullish: Close drops below the LOW of ALL previous N candles + high volume
• Bearish: Close rises above the HIGH of ALL previous N candles + high volume
• This identifies potential exhaustion points with institutional participation
STEP 2 - CONFIRMATION
• Bullish signal: Price must close ABOVE anchor candle's high
• Bearish signal: Price must close BELOW anchor candle's low
• Must occur within specified bars or setup is cancelled
STEP 3 - SCORING (1-4 Stars)
★ Confirmation occurred
★ Anchor had exceptional volume (>2x avg)
★ Confirmation candle has strong volume (>1.2x avg)
★ Aligned with macro trend (200 EMA)
█ HOW TO USE
SIGNALS
• Green "B" = BUY signal | Red "S" = SELL signal
• More stars (★) = Higher probability setup
SETUP BOXES
• Green box = Bullish setup forming, waiting for confirmation
• Red box = Bearish setup forming, waiting for confirmation
DASHBOARD
• Shows status, confirmation countdown, and volume condition
█ RECOMMENDED SETTINGS
| Style | Lookback | Confirm | Volume Multi |
|--------------|----------|---------|--------------|
| Scalping | 10-15 | 2-3 | 1.5x |
| Day Trading | 15-25 | 3-4 | 2.0x |
| Swing | 20-30 | 3-5 | 2.0-2.5x |
█ KEY PARAMETERS
• Candle Lookback: Candles to check for breakout (higher = stronger signals)
• Confirm Within: Max bars for confirmation (lower = faster signals)
• Anchor Volume Multiplier: Volume threshold for anchor candle
• Macro Trend EMA: Trend filter for scoring (default 200)
█ ALERTS
• Buy/Sell Signal - Any confirmation
• High-Quality Buy/Sell - 3+ star signals only
• Setup Detected - When anchor forms (before confirmation)
█ TIPS
• Focus on 3-4 star signals for best results
• Signals near support/resistance add confluence
• Use stop-loss beyond anchor candle extreme
• Test on demo before live trading
Works on all markets: Stocks, Forex, Crypto, Futures
Smart Money Zones (FVG + OB) + MTF Trend Panel## Overview
Professional-grade institutional trading zones indicator that identifies **Fair Value Gaps (FVG)** and **Order Blocks (OB)** - key price inefficiencies where smart money operates. Includes a comprehensive **Multi-Timeframe Trend Panel** for complete market context at a glance.
## Core Features
### 🎯 Fair Value Gaps (FVG)
Fair Value Gaps occur when price moves so aggressively that it leaves an "imbalance" or "gap" in the market structure. These zones often act as magnets where price returns to find liquidity.
**Detection Logic:**
- **Bullish FVG**: When current candle's low is above the high of the candle 2 bars ago
- **Bearish FVG**: When current candle's high is below the low of the candle 2 bars ago
- Requires strong impulse candle (configurable body percentage threshold)
- Color-coded zones: Green for bullish, Red for bearish
### 📦 Order Blocks (OB)
Order Blocks represent the last opposite candle before a significant price move - the zone where institutional orders were placed before the breakout.
**Detection Logic:**
- Identifies the last bearish candle before a strong bullish breakout (Bullish OB)
- Identifies the last bullish candle before a strong bearish breakout (Bearish OB)
- Validates breakout strength using ATR multiplier (1.2x default)
- Color-coded zones: Blue for bullish, Orange for bearish
### 📊 Multi-Timeframe Trend Panel
Real-time trend analysis across **7 timeframes** displayed in an elegant dashboard:
- **1 Minute** - Ultra short-term scalping
- **5 Minutes** - Short-term momentum
- **15 Minutes** - Intraday swings
- **30 Minutes** - Session trends
- **1 Hour** - Multi-session trends
- **4 Hours** - Daily structure
- **Daily** - Long-term direction
**Visual Indicators:**
- 🟢 Green circle = Bullish trend
- 🔴 Red circle = Bearish trend
- Clean, professional table design with customizable position and size
## Intelligence Features
### 🧠 Zone Strength Rating
Every zone is automatically classified by strength based on size relative to ATR:
- **VERY STRONG** - 2.0x ATR or more (major institutional zones)
- **STRONG** - 1.5x to 2.0x ATR (significant zones)
- **MEDIUM** - 1.0x to 1.5x ATR (moderate zones)
- **WEAK** - Below 1.0x ATR (minor zones)
Strength rating helps you prioritize which zones to trade from!
### 📉 Smart Mitigation Tracking
Zones automatically track how much they've been "filled" or mitigated:
- Calculates penetration percentage as price enters the zone
- Zones turn **gray** when 50%+ mitigated or fully filled
- Option to **auto-delete** mitigated zones to keep chart clean
- Live zones extend dynamically with price action
### 🎨 Trend Filter (Optional)
When enabled, only shows zones aligned with the current trend:
- Uses customizable MA period (default 50)
- Bullish zones only appear in uptrend
- Bearish zones only appear in downtrend
- Reduces noise and false signals significantly
## Customization Options
### Display Settings
- Toggle FVGs and OBs independently
- Adjust max zones per type (5-200)
- Choose to remove or gray out mitigated zones
- Color customization for all zone types
### Detection Parameters
- **Min Impulse Body %**: Controls how strong the impulse candle must be (0.3-1.0)
- **Order Block Lookback**: How many bars to look back for OB validation (5-50)
- **ATR Length**: Period for ATR calculation (5-50)
### Trend Filter
- Enable/disable trend filtering
- Adjustable MA period for trend determination
### MTF Panel
- Show/hide the trend panel
- 4 position options: Top Right, Top Left, Bottom Right, Bottom Left
- 3 size options: Small, Normal, Large
- Customizable MA period for trend calculation across all timeframes
## Trading Applications
### 1. **Liquidity Grab Entries**
Wait for price to sweep a zone (50%+ mitigation) then enter on reversal. Smart money often "hunts" these zones before the real move begins.
### 2. **Confluence Trading**
Look for zones that align with:
- Multiple timeframe trends showing same direction
- Multiple FVGs/OBs stacking in same area
- Key support/resistance levels
### 3. **Breakout Confirmation**
Use Order Blocks to confirm the strength of breakouts. Strong OBs indicate institutional participation.
### 4. **Retracement Entries**
Enter when price returns to a fresh, unmitigated zone in the direction of the higher timeframe trend.
### 5. **Range Trading**
Identify FVG zones at range extremes - price often reverses at these inefficiencies.
## How It Works
**Fair Value Gaps** form when the middle candle creates such aggressive movement that it leaves a price gap between the high/low of surrounding candles. Institutional traders know these gaps get filled.
**Order Blocks** mark the origin of major moves. The last opposite-colored candle before a breakout is where large orders were placed. Price often returns to these zones for "retests" before continuing.
**Mitigation** happens when price returns to fill these zones. The indicator tracks this automatically, showing you which zones are still "fresh" and which have been used up.
## Best Practices
✅ **Use higher timeframe trends** - Always check the MTF panel before taking trades
✅ **Trade fresh zones** - Unmitigated zones (not gray) have the highest probability
✅ **Combine with price action** - Look for rejection wicks and engulfing candles at zones
✅ **Respect zone strength** - VERY STRONG and STRONG zones are most reliable
✅ **Use trend filter** - Especially on lower timeframes to reduce false signals
❌ **Don't overtrade** - Not every zone will react, wait for confirmation
❌ **Don't ignore context** - Check the MTF panel for conflicting trends
❌ **Don't chase** - Wait for price to come to the zone, don't enter mid-zone
## Technical Details
- **Non-repainting**: All zones are drawn on confirmed candles only
- **Performance optimized**: Uses efficient array management with per-type caps
- **Real-time updates**: Zones extend and track mitigation as price moves
- **Universal compatibility**: Works on all markets and timeframes
## Recommended Settings by Style
**Scalping (1m-5m charts):**
- Max zones: 10-15
- Use trend filter: ON
- MTF Panel: Focus on 1m-15m trends
- Remove mitigated: ON (keep chart clean)
**Day Trading (5m-1H charts):**
- Max zones: 15-20
- Use trend filter: ON
- MTF Panel: Focus on 15m-4H trends
- Remove mitigated: OFF (track zone history)
**Swing Trading (1H-D charts):**
- Max zones: 20+
- Use trend filter: Optional
- MTF Panel: Focus on 1H-1D trends
- Remove mitigated: OFF (important zones persist)
---
## Perfect For
- Smart Money Concept (SMC) traders
- ICT methodology followers
- Institutional order flow traders
- Price action traders seeking key zones
- Multi-timeframe analysis enthusiasts
**Compatible with all markets:** Forex, Crypto, Stocks, Indices, Commodities, Futures
*Trade where the institutions trade. Follow the smart money.*
V-Max L2B: SMC Terrain Map (Institutional Order Flow)Overview The SMC Terrain Map (V-Max L2B) is a professional-grade structural analysis engine based on Smart Money Concepts (SMC). It provides a high-fidelity "topographical" view of market liquidity by automatically identifying and projecting institutional Supply/Demand zones, Fair Value Gaps (FVG), and Order Blocks (OB). The tool is designed to synchronize structural shifts with tactical execution.
Technical Methodology & Originality L2B moves beyond simple price marking by employing a sophisticated object management and tactical filtering engine, justifying its invite-only status:
Dynamic Mitigation & Sweeping Engine: Utilizing a custom SMCBox data structure, the script tracks institutional zones in real-time. It features a "Physical Mitigation Detection" system that automatically invalidates zones when price action effectively sweeps the liquidity, ensuring traders focus only on fresh, unmitigated levels.
Strategic-Lock Mechanism (v6.7 Update): This proprietary logic eliminates false signals during choppy conditions. Signals are interlocked with the presence of active OBs; a "War God" label will only trigger if an unmitigated zone is physically present on the chart.
Quantitative Trend Slope Filter: The system integrates EMA slope detection. During flat market phases, the engine enters "Silent Mode," automatically filtering out rapid flip-flop signals and meaningless noise from lateral price action.
Adaptive Profit Margin Defense: The script employs an original "is_room_to_trade" logic. It calculates the structural gap between localized levels and requires a minimum threshold (2.5x ATR) before validating alerts. This prevents overtrading in "Choke Zones" where the risk-reward ratio is statistically unfavorable.
Bar-Index Physical Lock: To prevent duplicate alert "spamming" on lower timeframes (e.g., 3M), the script utilizes a bar-index locking mechanism, ensuring only one high-conviction signal is issued per structural event.
How to Use
Zone Confluence: Identify high-probability setups when the "War God" tactical labels align with unmitigated Order Blocks (OB).
Trend Transitions: Monitor the "🛡️ Retreat" labels and CHoCH (Change of Character) markers for early warnings of structural failure or trend reversals.
產品概述 V-Max L2B SMC 撐阻地形圖是一款專業級結構分析引擎。它透過自動識別並投影機構級供應/需求區、失衡缺口 (FVG) 與訂單塊 (OB)，為交易者提供高清晰度的市場流動性「地形圖」，並將結構轉變與戰術執行同步化。
技術邏輯與原創性 L2B 作為僅限邀請工具，其技術價值體現在精密的物件管理與戰術鎖定引擎：
動態失效與清掃引擎： 採用自定義 SMCBox 數據結構，具備實時「物理失效檢測」。當價格清掃流動性時，系統自動標註失效，確保交易者僅關注未被觸碰的有效區間。
Strategic-Lock 戰略鎖定 (v6.7 更新)： 此邏輯消除了震盪行情下的誤報。訊號與實體 OB 聯鎖；只有在畫面上存在有效、未失效的 OB 時，系統才會觸發「戰神」進場標籤。
量化趨勢斜率過濾： 引入 EMA 斜率判定技術。當市場進入橫盤、均線走平時，系統自動進入靜默模式，過濾無意義的多空頻繁轉換訊號。
適應獲利空間防禦： 內建原創空間過濾邏輯。系統要求結構空間須達到 2.5 倍 ATR 門檻才允許發出警報，有效避開盈虧比不利的「窒息區」。
K 棒物理鎖： 具備單根 K 棒警報鎖定機制，防止在低時區（如 3M）因價格反覆摩擦而導致的重複誤報。
Access & Authorization This is an Invite-Only script. Please refer to my TradingView Profile Signature for instructions on how to request access and authorization.
Disclaimer: This script is for technical analysis and educational purposes only. Trading involves risk.
