Algo_LongOnly_H1_SS26Strategy Overview: Hull Suite Trend Follower
This H1 quantitative strategy utilizes a multi-variant Hull Moving Average (HMA) engine to capture swing momentum with minimal lag. By dynamically switching between HMA, EHMA, and THMA, the algorithm filters market noise and identifies high-probability trend shifts.
Key Features
Adaptive Smoothing: Leverages the Hull Suite to eliminate price lag while maintaining sensitivity to trend reversals.
Directional Versatility: Configurable for Long-Only, Short-Only, or Bi-directional execution.
Time-Bounded Backtesting: Integrated date-range engine for precise historical performance analysis.
Visual Intelligence: Real-time trend visualization via a dynamic cloud band for immediate bias confirmation.
Indicateurs et stratégies
Scanner BO: MG MG NEXT SIGNAL (Painel Live)📌 Binary Options Indicator Description (M5)
This indicator is specifically designed for binary options trading on M5 charts with a 5-minute expiration time, optimized for short-term trading strategies. It combines precise technical signals with a controlled risk management system using Martingale up to MG3, helping traders manage losses in a structured sequence.
✅ Key Features:
Real-time signals: Generates clear CALL (buy) and PUT (sell) arrows directly on the M5 chart.
Trend filtering: Uses moving averages or momentum indicators to confirm the prevailing trend, avoiding counter-trend entries.
Expiration timing: Optimized for 1 candle (5 minutes) expiry, ideal for brokers offering fixed expiries.
Integrated Martingale system (up to MG3):
After a losing trade, the indicator suggests the next risk level: MG1 (2x), MG2 (4x), MG3 (8x).
Visual and sound alerts for each level.
Prevents overtrading by limiting recovery to 3 levels.
Non-repaint signals: All signals are confirmed on candle close, ensuring reliability.
Custom alerts: Supports pop-up, sound, and email notifications (via Pine Script alerts).
🎯 Target Audience:
Traders focusing on high-frequency M5 binary strategies who want automated signal generation and disciplined Martingale-based risk management.
🛠️ How to Use:
Apply the indicator to any forex pair, index, or cryptocurrency on the M5 chart.
Wait for a signal (arrow) + trend confirmation.
Open a trade with 5-minute expiration.
If the trade loses, follow the suggested Martingale level (up to MG3).
Reset the sequence after a winning trade.
⚠️ Risk Warning: Martingale increases risk. Use only with proper capital management. Suitable for accounts with sufficient balance.
Use this description when publishing your script in the Pine Editor. Make sure your script is set to "Invite-only" visibility to control access.
FOR DONATIONS PLEASE : pix rdnkll85@gmail.com
Kaisen London Sweep Reversal (VALID) + MSS Close )Kaisen London Reversal – Liquidity & MSS Strategy
The Kaisen London Reversal indicator is designed to identify high-probability reversals after liquidity sweeps during the London session, using precise market structure confirmation and fixed risk parameters.
🔹 Core Logic
London Session Range
Automatically marks the London High and London Low built between 03:00 – 09:15 New York time.
Liquidity Sweep Filter
A setup is only valid if price takes the London High or Low.
Sweeps exceeding a predefined maximum distance are ignored to avoid trend continuation traps.
Market Structure Shift (MSS)
Entry is triggered only after a confirmed MSS, defined by a candle close back inside the London range, signaling a potential reversal.
Session-Based Execution
Trades are taken exclusively during the New York Open window (09:30 – 10:30 NY time) to ensure sufficient volatility and follow-through.
🔹 Trade Management
Stop Loss: Fixed at 40 points, designed to absorb post-sweep volatility.
Take Profit: Automatically set to the opposite side of the London range, targeting full mean reversion.
Risk Profile: Optimized for asymmetric R:R, allowing a single winning trade to offset multiple losses.
🔹 Visual Features
Clean horizontal lines for:
London High
London Low
Clearly defined TP and SL boxes using standard TradingView-style coloring:
Green for Take Profit
Red for Stop Loss
Minimalistic design focused on price action and structure, avoiding unnecessary clutter.
🔹 Best Use Case
Ideal for scalping and intraday traders
Optimized for lower timeframes (15s – 1m) where liquidity behavior and micro-structure are most visible
Particularly effective in prop firm environments, where drawdown control and high R-multiple trades are essential
VWAP Regime Filter V6
## **VWAP Regime Filter V6**
### Overview
This indicator classifies market conditions into distinct regimes based on VWAP (Volume Weighted Average Price) gradient analysis. By measuring how much VWAP has moved over a lookback period, it identifies whether the market is in a **Mean Reversion**, **Trend Continuation**, or **Observe Only** state — helping traders align their strategy with current market conditions.
### How It Works
The indicator calculates the VWAP gradient (change in ticks) over a configurable lookback period:
- **Mean Reversion** (Blue) — VWAP is flat, suggesting price may revert to the mean
- **Trend Continuation Long** (Green) — VWAP rising strongly, favor long bias
- **Trend Continuation Short** (Purple) — VWAP falling strongly, favor short bias
- **Observe Only** (Gray) — VWAP movement is inconclusive, exercise caution
### Key Features
- **Dual Timeframe Analysis** — Compare short-term (10 bars) and long-term (50 bars) VWAP gradients with four confirmation modes:
- *ShortOnly* — Use short lookback only
- *LongOnly* — Use long lookback only
- *BothMustAgree* — Both timeframes must show same regime
- *LongConfirmsShort* — Short triggers, long must not contradict
- **Anti-Flicker Logic** — Prevents rapid regime changes (zebra effect) by requiring consecutive bars to confirm a regime change
- **Visual Regime Shading** — Color-coded fill between VWAP bands for easy historical analysis
- **Real-Time Dashboard** — Displays current regime, gradient values, and mode settings
- **Configurable Alerts** — Get notified when regime changes occur
### Settings Guide
| Parameter | Default | Description |
|-----------|---------|-------------|
| Short Lookback | 10 | Bars for short-term gradient |
| Long Lookback | 50 | Bars for long-term gradient |
| Flat Threshold | 4 ticks | Maximum gradient for Mean Reversion |
| Trend Threshold | 40 ticks | Minimum gradient for Trend Continuation |
| Anti-Flicker Bars | 3 | Consecutive bars needed to confirm regime change |
### How To Use
1. **Mean Reversion Regime** — Consider fading moves away from VWAP, look for reversals at the bands
2. **Trend Continuation Regime** — Trade with the trend, use pullbacks to VWAP as entry opportunities
3. **Observe Only Regime** — Reduce position size or wait for clearer conditions
### Notes
- Gradient thresholds may need adjustment based on the instrument and timeframe
- The anti-flicker feature helps avoid whipsaws but adds slight lag to regime detection
- Works best when combined with other confluence factors (support/resistance, volume, etc.)
TheNeffsyMethod Indicator!This is the indicator of my strategy!
i live trade this strategy daily!
It marks gaps that and key levels that i use to find reversals or continuations off of!
Ingenuity Crazy Strategy BasicThis indicator is designed to keep your trading simple and repeatable. By default, it is optimized for EURUSD, during New York session, on the 5-minute chart. The indicator automatically marks a tradable range and waits for price to break and confirm a direction. Once the signal appears, it’s as straightforward as buy or sell—no extra analysis or overthinking required.
After the first entry is taken, the indicator continues to monitor price. The goal is to remove hesitation and reduce emotional decision-making, while still giving you structured trade opportunities.
This system is not meant to be over-tweaked. The logic is built to give clean entries as long as you’re using the correct session, pair, and settings.
🔧 Default Setup:
• Pair: EURUSD
• Session: New York
• Timeframe: M5 (5-minute)
⚠️ Important:
The default settings are only optimized for GBPUSD. To trade other pairs or timeframes and get the most consistent results, you must use the correct settings. For any questions please feel free to message me.
VWAP Suite this is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updated
VWAP Suite2 dedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updated
top secret avengers suitethis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updatedthis is vwpa suit updated
CT Traders Fair Value GapFair Value Gaps (FVG)
Fair Value Gaps (FVG) highlight areas of imbalance between market participants and have become very popular among technical analysts.
The following script aims to display Fair Value Gaps, along with:
The percentage of gaps filled
The average duration (in bars) before gaps are filled
Users can receive alerts when an FVG is filled using the alerts built into this script.
🔶 USAGE
(image)
In practice, FVGs highlight areas of support (bullish FVG) and areas of resistance (bearish FVG).
Once a gap is filled, suggesting the end of the imbalance, a potential price reversal can be expected.
This approach is more contrarian in nature (against the trend).
Users who prefer a more trend-following approach can use the identification of FVGs as direct signals, entering:
Long positions when a bullish FVG is identified
Short positions when a bearish FVG is identifie
CT traders Fair Value Gap Fair Value Gaps (FVG)
Fair Value Gaps (FVG) highlight areas of imbalance between market participants and have become very popular among technical analysts.
The following script aims to display Fair Value Gaps, along with:
The percentage of gaps filled
The average duration (in bars) before gaps are filled
Users can receive alerts when an FVG is filled using the alerts built into this script.
🔶 USAGE
In practice, FVGs highlight areas of support (bullish FVG) and areas of resistance (bearish FVG).
Once a gap is filled, suggesting the end of the imbalance, a potential price reversal can be expected.
This approach is more contrarian in nature (against the trend).
Users who prefer a more trend-following approach can use the identification of FVGs as direct signals, entering:
Long positions when a bullish FVG is identified
Short positions when a bearish FVG is identifie
1-Year High/Low Mean (Daily Anchored)This indicator calculates the highest high and lowest low over the past year using daily candles, then plots the mean (midpoint) between those two levels. The result is a clean, stable structural reference line that helps traders understand where current price sits within its yearly range.
What It Shows
1‑Year High – the highest daily high over the lookback period
1‑Year Low – the lowest daily low over the same period
1‑Year Mean – the midpoint between the yearly high and low
These levels provide a long‑term framework for evaluating trend strength, momentum, and potential mean‑reversion behavior.
Designed for the Daily Timeframe
This indicator is intentionally built for the daily timeframe and higher.
All calculations are anchored to daily data, ensuring consistent and accurate yearly levels.
It does not display on intraday charts to avoid confusion caused by limited intraday history.
Features
Daily‑anchored yearly high, low, and mean
Adjustable lookback period (default: 365 days)
Optional display of the dates where the yearly high and low occurred
Clean, minimal, structure‑focused design
Intended Use
Ideal for traders who want a simple, reliable way to visualize long‑term price structure.
Pairs well with trend‑following systems, breakout strategies, and mean‑reversion setups.
Future versions may include shaded zones, alerts, multi‑year modes, or additional structural tools depending on community interest.
EV Alpha + Structure Strategy EV Alpha + Structure Strategy is a clean backtesting framework designed to help you validate and tune the parameters behind the EV Alpha / Market Structure concept. It enters on Alpha signals (or optional BOS/CHOCH triggers) and, once in a position, it holds the trade until either Stop Loss or Take Profit is hit—it does not close or reverse on opposite signals.
Key Logic
Entries
Default: Alpha oscillator level cross (BUY / SELL)
Optional: Use BOS/CHOCH events as the entry trigger
Optional: Structure bias filter (trade only in the current structural direction)
Exits (no signal-based closes)
Stop Loss = ATR × multiplier
Take Profit = RR × SL distance
SL/TP distances are frozen at entry (they do not move after the trade opens)
Execution Rules
One position at a time (no pyramiding)
New signals are ignored while a trade is open
Optional session filter
Notes / Disclaimer
This strategy is intended for research and parameter calibration. It is not financial advice and does not guarantee performance. Results depend on symbol, timeframe, costs, and market regime. Always validate with realistic commissions/slippage and apply proper risk management in live trading.
Multi MA-MTF + ATRMulti MA-MTF + ATR is a lightweight, flexible moving-average toolkit built for clean charting and multi-timeframe context.
Key Features
Up to 10 Moving Averages (SMA / EMA / RMA / WMA / VWMA / HMA)
Per-MA controls:
Enable/disable
Type, Length, Source
Color + Width
MTF mode
Project to LTF: display a higher-timeframe MA on lower timeframes (example: show the 1H MA directly on the 5m/15m chart)
Only on that TF: show the MA only when the chart timeframe matches the selected TF
Confirmed option for higher-timeframe values (helps avoid repaint-like behavior by holding the last confirmed HTF value)
ATR Panel
ATR value table displayed on the chart
Optional ATR high/low lines (disabled by default)
Defaults
Only MA1–MA3 enabled by default (clean out of the box)
Default MA line width set to 1
ATR lines OFF by default
Important Note (If it “drifts” / appears off the price)
If the indicator looks “detached” or seems to drift, it’s usually because TradingView moved it into a separate pane.
Fix: click the three dots next to the indicator name → Move to → Main chart.
You can also remove and re-add the indicator to reset its placement.
ES NQ Spread EMA Cloud MomentumRelative Momentum Filter ES (vs NQ)
🎯 Indicator Purpose
This indicator is not an entry signal.
Its purpose is to identify phases where the S&P 500 (ES) becomes relatively stronger or weaker than the Nasdaq (NQ), in order to filter trades in the correct direction.
It is especially suited for scalping and intraday trading, as a complement to tools such as VWAP, price structure, or footprint.
🔍 General Principle
The indicator calculates an ES–NQ spread, then analyzes:
relative strength (ES vs NQ)
changes in relative momentum
Two exponential moving averages are used:
EMA 20: active relative momentum
EMA 40: short-term relative context
The position of EMA 20 relative to the zero level indicates whether ES is structurally strong or weak compared to NQ.
☁️ Context Cloud (Directional Bias)
A colored cloud appears between the two EMAs to define the allowed directional bias:
🟢 Green Cloud (Long ES bias)
EMA 20 < 0
EMA 20 > EMA 40
→ ES was relatively weak and is starting to strengthen
🔴 Red Cloud (Short ES bias)
EMA 20 > 0
EMA 20 < EMA 40
→ ES was relatively strong and is starting to weaken
When no cloud is present, the context is neutral.
🎯 Momentum Confirmation (Green / Red Background)
A colored background appears only when relative momentum is confirmed:
🟢 Green Background
long bias active
the spread moves back below the EMA zone
→ momentum resumes in favor of ES longs
🔴 Red Background
short bias active
the spread moves back above the EMA zone
→ momentum resumes in favor of ES shorts
These areas highlight moments of interest to look for a setup on ES, not automatic trade entries.
🔔 TradingView Alerts
The indicator includes:
one LONG alert
one SHORT alert
Each alert can be manually enabled or disabled, for example based on the price position relative to VWAP.
⚠️ Best Practices
Use this filter only as a contextual tool
Always wait for price confirmation
Avoid trading against the indicated bias
Do not use it as a standalone system
Multi-Filter Slope Master Pro CareC v2This advanced multi-timeframe indicator analyzes EMA slope trends with customizable filtering to identify high-probability trading opportunities. It calculates slope momentum for EMA 9, 20, and 50 using three different methods (Linear Regression, Weighted, or Simple), applies higher timeframe trend filtering and volume confirmation, and presents signals in a highly configurable data table with five color themes and six positioning options. The indicator visualizes filtered slope values while offering comprehensive trend strength analysis through real-time table displays that adapt to different screen sizes and user preferences.
Candlestick Bible by Homma Indicator by NahomThis is an indicator that models the infamous book by Homma that educates on candlestick's and their purpose. This script so far shows you the Bullish/bearish Hammer, Gravestone/dragonfly doji as well as the Bullish/Bearish Engulfing candles, making it easier to call out and trade with confidence.
HTF Rejection Blocks (RB) v2 [louis]Overview
HTF Rejection Blocks is a price action tool designed to automatically identify and visualize areas of significant market rejection. By analyzing candle wicks relative to their bodies and historical volatility, this indicator highlights zones where institutional buying or selling pressure has occurred.
Unlike standard support and resistance indicators, this script focuses specifically on wick rejection, which often signals where price failed to sustain a move due to a wall of opposing orders.
How It Works
The script utilizes a percentile based ranking system. It analyzes the upper and lower wicks of the most recent candles and compares them to the lookback period.
Bearish Zones: Created when an Upper Wick is significantly larger than the average, indicating sellers pushed price down aggressively.
Bullish Zones: Created when a Lower Wick is significantly larger than the average, indicating buyers stepped in to reverse the price.
Once a zone is identified, it draws a box extending to the right until price closes beyond the zone, mitigating/invalidating it.
Key Features
1. Multi-Timeframe (MTF) Dashboard
Monitor higher timeframe structures without leaving your current chart. The script allows you to configure up to 4 distinct timeframes simultaneously.
Example: You can view 15m, 1H, and 4H wick zones while trading on a 1m chart.
Each timeframe has independent Bull/Bear color settings and toggle controls.
2. Smart Filtering (Advanced Options)
Reduce noise and focus on high-probability setups using the built-in filters
3. OTE Fib Levels
Automatically plots Optimal Trade Entry (OTE) Fibonacci levels inside every active zone.
Includes customizable levels: 0.50, 0.62, 0.705, and 0.79.
Useful for precision entries upon a retest of the wick.
4. Zone Management
Live Invalidation: Zones are automatically removed when price closes outside the wick range.
Mitigated Zones: Option to leave a faint "ghosts" of broken zones to see historical reaction points.
Wick Highlighting: Optional outline around the specific candle that created the zone for visual clarity. Helpful for HTF zones.
Settings Guide
Zone Settings
Highlight Wick: Toggles the border outline of the candle that generated the zone.
Mitigated Zones: If checked, broken zones remain on the chart as faint gray boxes (Ghosting).
Timeframe Configuration
Enable/Disable: Use the checkbox to turn specific timeframes on or off.
Timeframe Selector: Choose the specific TF (e.g., 15m, 4H, D).
Colors: Customize the Bull (Support) and Bear (Resistance) colors for each timeframe to distinguish them easily.
OTE Fib Levels
Enable retracement levels to appear inside the zones.
Advanced Options
Experimental Filtering: Enables the RSI and minimum spacing logic to filter out weaker signals.
Calculated Bars Count: specific how far back the script processes data (lower numbers improve performance).
Ready Pips
READYPIPS delivers a precision-based trading experience by highlighting high-probability market setups with automated entries, exits, and real-time alerts.
The system adapts to market structure and multiple timeframes, helping traders stay aligned with price action while minimizing chart clutter.
Designed for consistency, clarity, and efficiency—without overcomplicating your workflow.
Ideal for traders looking to enhance execution and reduce emotional decision-making
Orion (Market Structure & Confluence Framework)Orion (Market Structure & Confluence Framework • Premium • Closed)
Orion is a professional-grade market structure and execution framework designed for serious intraday traders who want clarity, precision, and discipline — not signal spam.
This indicator was developed and refined through extensive live trading and backtesting in Natural Gas, one of the most volatile and difficult markets to master. While NG was the primary proving ground, Orion is market-agnostic and works across commodities, stocks, indices, forex, and crypto.
What Orion Does
Orion continuously evaluates higher-timeframe structure and lower-timeframe execution conditions, then only presents trade opportunities when conditions are clean, aligned, and favorable.
It helps traders:
Capture large directional moves
Participate in confirmed reversals
Stand down during choppy or mean-reversion days
Avoid overtrading and noise
Trade signals are intentionally selective. When signals are mixed, Orion does nothing — by design.
Core Concepts (High Level)
Market Structure Context
Determines whether the market environment is bullish, bearish, or mixed.
Key Levels & Structural Zones
User-defined levels are evaluated based on how price last interacted with them to determine bias and probable targets.
Trendlines (Manual, Human-Defined)
Orion interprets price interaction with trader-drawn trendlines, preserving human discretion and avoiding unreliable auto-drawn logic.
Confluence Logic
Signals only appear when multiple independent factors agree. No alignment = no trade.
Trade Signals (When Appropriate)
Based on extensive testing, signal days have historically been profitable roughly 80% of the time (about 4 out of 5 days), with an emphasis on capturing meaningful market moves, not scalping.
Ease of Use
Simple initial setup (define key levels, draw trendlines)
Minimal upkeep (occasional adjustments as structure evolves)
Once set, Orion handles the heavy lifting
This is not a fully automated system. It is a decision-support tool that rewards discipline, patience, and proper risk management.
Transparency & Risk
No guarantees are made
Losses are part of trading
Stop losses and position sizing are essential
Results depend on trader discipline and execution
Educational resources on trendlines and support/resistance (e.g., creators like Tori Trades or WyseTrade) can be helpful for newer users.
Support & Mentorship
24/7 support included for all users
A limited number of users, upon request, may receive direct mentorship from the creator
The creator combined personal trading experience, discretionary strategy design, and AI-assisted development to build Orion, and trades Natural Gas profitably using this framework.
Pricing
NORMALLY $129.99 per month / $999.99 per year
(One solid trading day can easily justify the cost)
HOWEVER it is currently provided for free (for limited time only).
Who Orion Is For
✅ Serious intraday traders
✅ Structure-focused traders
✅ Traders who value quality over quantity
❌ Beginners seeking guaranteed signals
❌ Fully automated trading seekers
© 2026 Gordon Edwards. All rights reserved.
Licensed for individual use only. Redistribution, resale, or reverse engineering is prohibited.
EMA Scalper Pro BY FS and Grok
- Main Configuration (Inputs)
When adding the indicator, you'll see a settings panel divided into groups. Here's the key ones and recommendations for your setup (60x on BTC at open):
EMA Configuration:
"EMA Fast Period" (default 7): Fast EMA for momentum. Lower for faster signals (e.g., 5-9).
"EMA Slow Period" (default 25): Slow EMA for trend. Increase for more stable trends (e.g., 20-30).
"Show EMAs" (true): Displays blue (fast) and orange (slow) lines. Turn off if the chart is cluttered.
Candle Patterns:
"Confirmation Candles" (default 2): Bars to check patterns (e.g., hammer, engulfing). Increase to 3-4 for fewer false signals.
"Enable Patterns" (true): Activates bullish/bearish pattern filter. Useful for signal confirmation.
Market Structure:
"Pivots Lookback" (default 5): Bars to detect higher highs/lower lows. Adjust to 3-7 for BTC volatility.
"Show Labels" (true): Draws "Uptrend" (green) or "Downtrend" (red) on pivots.
"Filter by Trend" (true): Buy signals only in uptrend, sell in downtrend. Enable to avoid counter-trend trades.
Volume Confirmation:
"Volume MA Length" (default 14): Period for volume average. Lower for sensitivity.
"Z-Score Threshold" (default 2.0): Threshold for spikes. Lower to 1.5 for more signals.
"Enable Volume Confirmation" (true): Requires volume spike for signals.
Liquidity Zones:
"Minimum Reaction ($)" (default 400): Minimum move for a zone. Adjust based on BTC volatility.
"Max Zones to Show" (default 20): Limit of boxes (green for buy/low, red for sell/high).
"Zone Width (x ATR)" (default 0.5): Width based on volatility. Increase for wider zones.
"Show Liquidity Zones" (true): Draws horizontal boxes.
"Enable Alerts" (true): Alerts when entering a zone (e.g., "Price entered Liquidity Buy Zone").
Order Blocks Detection:
Similar to liquidity: "Minimum Reaction" (400), "Max" (20), "Width" (0.5), "Show" (true), "Alerts" (true).
Boxes: Lime for bull (support), fuchsia for bear (resistance).
Fair Value Gaps Detection:
"Minimum Gap ($)" (default 50): Minimum gap for FVG.
"Max FVGs" (20): Limit of boxes (teal for bull, maroon for bear; gray if mitigated).
"Show FVGs" (true): Draws gaps.
"Enable FVG Alerts" (true): When entering (e.g., "Price entered Bullish FVG").
"Enable FVG Mitigation Alerts" (true): When filling gap (e.g., "Bullish FVG Mitigated").
Higher TF Table: "Show Table" (true): Displays table with EMA crosses on 5m, 15m, etc. (TF, Dir: Bullish/Bearish, Bars since cross).
Recommendation for your setup: Keep defaults to start. On 1m/5m, enable all filters for precision in 60x. Test in demo before live.
- How to Interpret the Indicator on the Chart
EMA Lines: Blue (fast), orange (slow). Bullish cross (blue over orange) = potential buy; bearish = sell.
Confirmed Crosses: Green cross below (buy), red above (sell), offset to align with candle.
Trend Labels: "Uptrend" green on highs, "Downtrend" red on lows. Indicates structure (HH/LL).
Liquidity Zones: Extended horizontal boxes. Green (buy/support), red (sell/resistance). Expect reactions (bounce/break) when touched.
Order Blocks: Lime boxes (bull/support), fuchsia (bear/resistance). Areas where accumulated orders can cause reactions.
FVGs: Teal boxes (bull/imbalance up), maroon (bear/imbalance down). Unfilled gaps; gray if mitigated (gap closed).
Final Signals: Green triangle below (buy), red above (sell). Combines everything: cross + patterns + trend + volume.
Higher TF Table: In top-right. Shows for 5m-D: TF, Dir (Bullish green/Bearish red), Bars (since last cross). Useful to align with larger trends.
- Alerts and Notifications
Set up alerts in TradingView: Right-click on the indicator > "Add alert".
Signals: "Buy Signal" or "Sell Signal" when triangle appears.
Zones: When entering box (e.g., "Price entered Liquidity Buy Zone").
OB/FVG: Similar, plus mitigation (e.g., "Bullish FVG Mitigated" when gap fills, signaling potential continuation).
- How to Use in Trading (Tips for Your Setup)
Timeframe: 1m/5m for scalping at open (9:30 AM ET, influenced by traditional markets).
Strategy: Wait for signal (triangle) near zone/OB/FVG, with volume and trend aligned. In 60x, use stops at ATR (e.g., 1-2x ATR) and takes at 1:2 ratio. Low exposure (3-5 min/trade).
Risk: Always backtest (in TradingView) and use 1-2% capital per trade. Not financial advice; combine with your analysis.
Customization: Disable filters for more signals, but increases risk. For volatile BTC, lower reaction/gap thresholds.
